Search

MQ8 MQ-8 hydrogen sensor detection alarm module,Gas sensor module

Products > Air Sensor > MQ8 MQ-8 hydrogen sensor detection alarm module,Gas sensor module
    • 1
    • 2
    • 3
    • 4
    • 5

MQ8 MQ-8 hydrogen sensor detection alarm module,Gas sensor module

The gas sensitive material used in the MQ-5 gas sensor is tin dioxide (SnO2), which has low conductivity in clean air. When there is combustible gas in the environment where the sensor is located, the conductivity of the sensor increases with the increase of the combustible gas concentration in the air.
shared：

MQ8 MQ-8 hydrogen sensor detection alarm module,Gas sensor module
Introduction to MQ-8 sensor :
The gas sensitive material used in the MQ-8 gas sensor is tin dioxide (SnO2), which has low conductivity in clean air. When there is combustible gas in the environment where the sensor is located, the conductivity of the sensor increases with the increase of the combustible gas concentration in the air. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration. The MQ-8 gas sensor has high sensitivity to hydrogen and is ideal for monitoring other hydrogen-containing gases. This sensor can detect a variety of hydrogen-containing gases, especially city gas, and is a low-cost sensor suitable for a variety of applications.
Send Message to us *  Part Number | Package Type | Quantity are needed if you send messages to us *  Send all models you are looking for to us,we can quote all of them. *  Welcome to attach Purchase / Factory Bom


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

AM2305 Digital temperature and humidity sensor

1) The relative humidity and temperature, calibration of all digital output 2) Excellent long-term stability 3) Without additional components 4) Long distance signal transmission 5) ultra low power 6) 4 pin installation 7) Completely interchangeable

PT100 temperature sensor thermal resistance thermocouple WZP-035 probe waterproof and corrosion resistant high temperature

Non-standard customization High temperature thermal resistance 450 degree specification price as above NTC thermal 4*30*2 meters K type PTFE low temperature 200 degrees 2*30mm*1m A grade three core

M12 proximity switch sensor LJ12A3-4-Z/BX/BY/AX/AY/EX/DX/EZ/DZ normally open 24V

Current specification: 300mA Rated working voltage: DC: 6-36V Distance measurement: 4mm±10% Output mode: NPN NO (normally open) Level signal: low level Installation method: non-embedded Thread diameter: M12X1 Shell material: brass nickel plated Wire length: 1.2 meters

SHTC1 humidity and temperature sensor temperature sensor for agricultural

Datasheet SHTC1 Humidity and Temperature Sensor IC Best performance-to-price ratio Fully calibrated and reflow solderable Ultra-low power consumption Power-up and measurement within 1 ms 1.8 V supply voltage Ultra-small DFN package : 2 x 2 x0 . 75 mm³ Typical accuracy : ± 3% RH and + 0.3 ºC

Stainless steel temperature sensor probes

FSR402 Force Sensing Resistor Long Tail Resistance-type Thin Film Pressure Sensor

Specification Sensing Area: 1.27cm / 0.5" Output Signal: Passive variable resistance Force Sensing Range: 0g~10kg Length: 6cm / 2.36" Width: 1.9cm / 0.75" Welcome to your kindly inquiry : )

41F bipolar latch 012 hall sensor AH41 sensor 43A Electric vehicle 43F electric motor SS41F SS443A

NTC Probe for immersion sensor custom steel tube 50mm

1.sensor well for immersion sensor , custom steel tubes 50mm G1/2 legth 56mm 2.sensor well for immersion sensor custom steel tubes 80mm G1/2 legth 86mm

Costom steel tube threades sleeve stainless steel temperature sensor NTC thermostat probe

Costom steel tube threades sleeve stainless steel temperature sensor NTC thermostat probe

Electronics Customized SS 304 Stainless steel pipe double ferrule compression connector tube

MQ2 Mq-2 gas sensor probe

1. Good sensitivity to combustible gas in a wide concentration range. 2. High sensitivity to methane 3. Long service life and low cost. 4. A simple drive circuit is enough. 5. Household gas leak alarm. 6. Industrial combustible gas alarm. 7. Portable gas detector.

LJ12A3-4-Z/BY Inductive Proximity Sensor Switch 4mm Detection PNP DC6-36V NO Normally Open

Hall effect sensor ss49e 49e hall element oh49e

The 49E is a Hall-effect integrated circuit. The output voltage changes with the change of the magnetic flux density, and it can detect the slight change of the magnetic field. It can be used to measure the motion of objects, distance, position sensor, etc. It is alsosuitable for use in harsh environments or heavily polluted conditions.

Thin Film Pressure Sensor DF9-40 High Precise Force Sensing Resistor Resistance-type Flexible Pressure Sensor

This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate. Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure. It has pressure sensitive function as well as water-resistant function. When sensor detects outside pressure, the resistance of sensor will change. Pressure signal can be converted into a corresponding electrical signal output using simple circuit.

MQ3 gas sensor Analog alcohol sensor (including connecting wire) for arduino
Previous： Raspberry Pi 3 WIFI +CPU1.2 G 1 G memory Raspberry Pi 3 module
Next： CC1101 Intelligent Industrial Wireless RF Communication Module SPI Transceiver Module 868MHz
Return
TOP
86-755-83877216
smartbes
smartbes