Smart Electronics Original BPI-M1 Banana Pi M1 board A20 Dual Core 1GB RAM Open-source development board single-board computer SBC

Products > Module > Smart Electronics Original BPI-M1 Banana Pi M1 board A20 Dual Core 1GB RAM Open-source development board single-board computer SBC

Smart Electronics Original BPI-M1 Banana Pi M1 board A20 Dual Core 1GB RAM Open-source development board single-board computer SBC

Original BPI-M1 Banana Pi M1 board A20 Dual Core 1GB RAM Open-source development board single-board computer SBC

Banana PI M1 is the open source hardware platform which published to assistant the
Elastos.org open source OS, Banana PI M1 is the dual core Android 4.2 product which more
better than the Raspberry Pi.

Banana Pi M1 series run Android,Debian linux,Ubuntu linux, Raspberry Pi imange and
cubieboard imange.
Elastos coordinate multi CUP to from the family cloud entirnment which based on the
“software/hardware service”

shared：

Banana PI M1 is the open source hardware platform which published to assistant the

Elastos.org open source OS, Banana PI M1 is the dual core Android 4.2 product which more

better than the Raspberry Pi.

Banana Pi M1 series run Android,Debian linux,Ubuntu linux, Raspberry Pi imange and

cubieboard imange.

Elastos coordinate multi CUP to from the family cloud entirnment which based on the

“software/hardware service”

Original BPI-M1 Banana Pi M1 board. A20 Dual Core 1GB RAM Open-source development board single-board computer SBC

SOC	Allwinner A20
CPU	A20 ARM Cortex™-A7 Dual-Core
GPU	ARM Mali400MP2Complies with OpenGL ES 2.0/1.1
Memory(SDRAM)	1GB DDR3 (shared with GPU)
Onboard Storage	SD (Max. 64GB) / MMC card slot UP to 2T on 2.5 SATA disk
Onboard Network	10/100/1000 Ethernet RJ45,optional WIFI
Video Input	A CSI input connector allows for the connection of a designed camera module
Video Outputs	CVBS , LVDS/RGB
Audio Output	3.5 mm Jack and DMI
Power Source	5 volt via MicroUSB(DC In Only) and/or MicroUSB (OTG)
USB 2.0 Ports	2 (direct from Allwinner A20 chip)
Buttons	Reset button: Next to MicroUSB connector
	Power button: Next to Reset button
	Boot button (Optional): Behind connector
GPIO(2X13) Pin	GPIO,UART,I2C bus,SPI bus with two chip selects,
GPIO(2X13) Pin	CAN bus,ADC,PWM,+3.3v,+5v,ground.
LED	Power Status LED (Red)
	Ethernet Status LED (Blue)
	User Define LED (Green)
Remote	IR (Optional)
OS
OS	Android Android 4.2 Cubieboard Ubuntu Raspberry Pi
Product Size	92 mm * 60 mm
Weight	48 g