Search

330L Small DIY Design Reciprocating Cycle Actuator with DC Gear Motor

Products > Motor > 330L Small DIY Design Reciprocating Cycle Actuator with DC Gear Motor
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6

330L Small DIY Design Reciprocating Cycle Actuator with DC Gear Motor

This Linkage Mechanism is an automatic constantly reciprocating actuator motor, which frequency is Variable.
shared：

Speed(RPM):

5rpm10rpm15rpm20rpm30rpm40rpm50rpm60rpm65rpm87rpm
100rpm120rpm150rpm200rpm300rpm400rpm500rpm600rpm800rpm1000rpm

 

 

 Voltage(V):

12V24V

 

-This Linkage Mechanism is an automatic constantly reciprocating actuator motor, which frequency
is Variable. 
-This machine output in an axle, the run speed on axis is Non-uniform. If require speed uniform
please don't bid.
 -This machine is Non-standard manual production, the surface is rough. If require surface precise
please don't bid.
 -The speed faster, the noise louder. If require quietly, please be careful before bid.
 -Motion part is consist of sliding  ball bearing and steel axle. Axle need adds lubricating oil at regular
intervals, in order to limited axle temperature less than 90 degrees, and oil wetness. 
-Due to rotating lump is affected by gravity, the machine go and back speed is different.
 -If you want to control speed, you can add a PWM DC motor speed controller for this.


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

DC 3V/6V/12V N20 Mini Micro Metal Gear Motor with Gearwheel Motors 15/30/50/60/100/200/300/500/1000RPM

Voltage: DC 3V/6V/12V Material: Metal Model: N20 Revolving Speed: 15/30/50/60/100/200/300/500/1000RPM Total Length: 36mm Motor Size: 12mm(diameter)*26mm(height) Shaft Size: 3mm(diameter)*10mm(length)

RS380/RS390/RS550 Children's Toy Car Motorcycle 6V12V Motor Gear Accessories

Options 6v390 motor (12 teeth) 12v390 motor (12 teeth) 550 6v8000 rpm 550 6v10000 rpm 550 6v14000 rpm 550 6v18000 rpm 550 6v20000 rpm 550 12v8000 rpm 550 12v10000 rpm 550 12v12000 rpm 550 12v15000 rpm 550 12v18000 rpm 550 12v23000 rpm 550 12v30000 rpm 390 6v14000 rpm 390 6v16000 rpm 390 6v18000 rpm 390 12v14000 rpm 390 12v16000 rpm 390 12v20000 rpm 570 motor 6v15000 rpm 570 motor 12v15000 rpm 570 motor 12v35000 rpm

12-24V 13000/26000rpm 885 High Speed DC Motor/Motor Bracket

Specification: - Precision ball bearing for front axle Small friction resistance, small friction resistance, low friction temperature, large axial bearing capacity, and strong oil sealing, extend the life of the motor. - Cooling fan. The rotor USES copper wire winding, small resistance, strong conductivity, so that the motor torque increased, cooling fan can make the motor constant temperature, so that the temperature will not rise.

540 motor with wire embossing shaft 12V micro DC motors DIY handmade toy

540 motor (wiring) Pressed-spindle 12V miniature DC motor DIY toy high-speed motor New 540 motor, high speed, large torque, suitable for manual model. If there is no suitable terminal connection, the terminal can be cut off for use.

Carbon brush 390-21145 low speed high torque motor DC6-18V ship/car/tank model

This short shaft 390 torque is quite good, belonging to low speed and high torque. 6 volts can drive, 12 volts speed 5400 rpm, 18 volts speed 8100 rpm

DC motor high power motor 12-24 V 550 / 555 / 775 / 795 / 895

This is a DC motor, which can't directly use 220 V household AC. please use switching power supply or battery power supply. It is recommended to use 12-24 V power supply with a current of more than 10 A. for motors below 5 series, it is recommended to use an adapter of about 4A or a power supply above lithium battery.

FC280SC-20150 DC micro motor 12V door lock flat carbon brush car central control motor

Model: FC280SC-20150 Dimensions: 30.6 mm*18.3 mm*24 mm Diameter axis: 2 mm Weight: 39.2 grams Voltage range: 6V-18V Rated voltage: 12V

DC 12V 400RPM N20 Micro Gear Motor 16mm Shaft M4x55mm Screw Reducer with Gear Box

Long shaft gear motor is a high quality gear motor. The gear motor adopts full metal structure including mental gear reducer with precise micro gear. This gear motor has large torque and small noise, can be used on electronic locks, intelligent model cars, robots, etc.

DC 12V 150W 13000~15000rpm 775 motor High speed Large torque DC motor Electric tool machinery

Specifications: Motor type: 775 Rated voltage: DC12V-24V Working voltage: 12V Idling speed:13000~15000rpm Rated current:0.32A Rated power:150W Size:98x42mm Shaft:5mm

Low Speed High Torque Worm Metal Gearbox Gear Motor With Encoder Reversible Electric Geared Motor

Specification: Voltage:6v/12v Speed:42rpm/95rpm power:2.88w Gear:Metal Torque:max 1.48N.m Good quality,factory supply,lead time fast
Previous： 1W 1M 1% Color ring resistance1K 10K 4.7K 10 ohm 100K 150 ohm metal film resistor
Next： 540 motor with wire embossing shaft 12V micro DC motors DIY handmade toy
Return
TOP
86-755-83877216
smartbes
smartbes