Search

Smart Electronics U18 / US1881 / OH188/1881, typing U18, hall element, hall sensor, hall switch

Products > Hall Sensor > Smart Electronics U18 / US1881 / OH188/1881, typing U18, hall element, hall sensor, hall switch
    • 1
    • 2
    • 3

Smart Electronics U18 / US1881 / OH188/1881, typing U18, hall element, hall sensor, hall switch

U18 / US1881 / OH188/1881, typing U18, hall element, hall sensor, hall switch

Applications

-Solid state switch

-Brushless DC motor commutation

-Speed sensing

-Position sensing

-Angular position sensing

-Current sensing
shared：



Order Information

Part number

US1881

Operate temperature

K:-40~125℃

Package

TO-92UA/SOT23

 

General Description

The US1881 is a bipolar Hall effect sensor IC fabricated from mixed signal CMOS technology. It incorporates advanced chopper
stabilization techniques to provide accurate and stable magnetic switch points. There are many applications for this HED in addition to
those listed above. The design, specifications and performance have been optimized for commutation applications in 5V and 12V brushless DC motors.

The output transistor will be latched on (BOP) in the presence of a sufficiently strong South pole magnetic field facing the marked side of the package.
Similarly, the output will be latched off (BRP) in the presence of a North field. The SOT-23 device is reversed from the UA package.

The SOT-23 output transistor will be latched on in the presence of a sufficiently strong North pole magnetic field applied to the marked face.

 

 

Applications

-Solid state switch

-Brushless DC motor commutation

-Speed sensing

-Position sensing

-Angular position sensing

-Current sensing

 

Features

-Chopper stabilized amplifier stage

-Optimized for BDC motor applications

-New miniature package / thin, high reliability package

-Operation down to 3.5V

-CMOS for optimum stability, quality and cost

 

 

Functional Block Diagrams

 

Absolute Maximum Ratings ( at Ta=25℃ )

Characteristics

Symbol

Values

Unit

Supply Voltage

Vdd

3.5~24

V

Supply Current

IDD

50

mA

Output Voltage

VOUT

3.5~24

V

Output Current

Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

MQ8 MQ-8 hydrogen sensor detection alarm module,Gas sensor module

The gas sensitive material used in the MQ-5 gas sensor is tin dioxide (SnO2), which has low conductivity in clean air. When there is combustible gas in the environment where the sensor is located, the conductivity of the sensor increases with the increase of the combustible gas concentration in the air.

FSR402 Force Sensing Resistor Long Tail Resistance-type Thin Film Pressure Sensor

Specification Sensing Area: 1.27cm / 0.5" Output Signal: Passive variable resistance Force Sensing Range: 0g~10kg Length: 6cm / 2.36" Width: 1.9cm / 0.75" Welcome to your kindly inquiry : )

M12 proximity switch sensor LJ12A3-4-Z/BX/BY/AX/AY/EX/DX/EZ/DZ normally open 24V

Current specification: 300mA Rated working voltage: DC: 6-36V Distance measurement: 4mm±10% Output mode: NPN NO (normally open) Level signal: low level Installation method: non-embedded Thread diameter: M12X1 Shell material: brass nickel plated Wire length: 1.2 meters

Smart Electronics E-bike Accessories Brushless Electric Motor Hall Sensor 3144 Circuit Board 41F 43F with Wire

E-bike Accessories Brushless Electric Motor Hall Sensor 3144 Circuit Board 41F 43F with Wire Product Categories (please choose the one you need) 1. Two-wheeled 13A 120 degrees 2. Two-wheeled 413 120 degrees 3. Two-wheeled 41F 120 degrees 4. Two-wheeled 43F 120 degrees 5. Two-wheeled 3144 120 degrees 6. Two-wheeled 13A 60 degrees 7. Two-wheeled 413 60 degrees 8. Two-wheeled 41F 60 degrees 9. Two-wheeled 43F 60 degrees 10.Two-wheeled 3144 60 degrees

Smart Electronics High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

PIR IR Light Motion Sensor Infrared Human Induction Lamp Switch 220V 50HZ Lights Control Ceiling On Off 3-6m Sensing

Product Parameter: 1.Sensing Mode:PIR sensing + light control 2.Rated Voltage:220V 50HZ 3.Output Way:Controllable Silicon 4.Load Power:filament lamp ≤100W electricity saving lamp ≤30W LED≤18W 5.Delay:20s (people are moving within the sensing range, the switch will auto delay ​and keep connecting;if people stay still,switch will stop responsing) 6.Sensing Distance:3-6m (high temperature will influence switch sensibility) 7.Sensing Angle:110° 8.Sensitivity to light :darkeness

Ozone gas sensor module ZE25-O3

The ZE25-O3 electrochemical ozone module is a general-purpose, compact module. The electrochemical principle is used to detect the ozone gas present in the air, which has good selectivity and stability. Built-in temperature sensor for temperature compensation; digital output and analog voltage output for easy use. ZE25-O3 is a universal gas module designed and manufactured by combining sophisticated electrochemical detection technology with sophisticated circuit design.

Original imported flexiforce film pressure sensor A301 1/25/100lbs

The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications. The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb). The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.

Smart Electronics Hall sensor A1344EUA-T AH3144E High sensitivity 402 switch 44E

Hall sensor A1344EUA-T AH3144E High sensitivity 402 switch 44E

Original imported 0.2 "pressure sensor FSR400 Force sensitive resistor fsr sensor

M8 photoelectric switch E3F-DS10C4 infrared sensor E18-D80NK obstacle avoidance sensor module normally open

High quality chips Accurate sensing Strong anti-interference ability Stable performance

Smart Electronics MQ-9 carbon monoxide Combustible gas sensor alarm module

MQ-9 carbon monoxide Combustible gas sensor alarm module Feature: Size: 32mm * 22mm * 27mm Main chip: LM393, MQ-9 gas sensors Working voltage: DC 5 V Characteristics: 1, having a signal output instruction. 2, dual signal output (analog output, and TTL level output) 3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller) 4, 0 - 5V analog output voltage, the higher the concentration the higher the voltage. 5, for CO, gas, liquefied petroleum gas with high sensitivity and good selectivity. 6, has a long life and reliable stability 7, rapid response and recovery characteristics Application: MQ-9 sensor main family, environmental detection of carbon monoxide gas for CO, gas, liquefied petroleum gas field testing;

Smart Electronics TO-92 Temperature sensor 18B20 Sensor Electronic chip IC for sensor hall electronic components

TO-92 Temperature sensor 18B20 Sensor Electronic chip IC for sensor hall electronic components Condition:New Supply Voltage:standar Dissipation Power:standar Operating Temperature:standar Funtion:temperature sensor

LJ12A3-4-Z/BY Inductive Proximity Sensor Switch 4mm Detection PNP DC6-36V NO Normally Open

Smart Electronics Duct type temperature and humidity sensor housing

Duct type temperature and humidity sensor housing 1. Copper sintered dust cover 2. Stainless steel lock wire seat 3. Good air permeability 4. Widely applicable 5. High cost performance

DHT90 SHT10 Digital temperature and humidity sensor with pin SHT10 Digital Humidity & Temperature Sensor

Smart Electronics PT100 temperature sensor thermal resistance thermocouple WZP-035 probe waterproof and corrosion resistant high temperature

PT100 temperature sensor thermal resistance thermocouple WZP-035 probe waterproof and corrosion resistant high temperature Non-standard customization High temperature thermal resistance 450 degree specification price as above NTC thermal 4*30*2 meters K type PTFE low temperature 200 degrees 2*30mm*1m A grade three core

Smart Electronics MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 gas sensor probe non-module

MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 gas sensor probe non-module Feature 1. Good sensitivity to combustible gas in a wide concentration range. 2. High sensitivity to methane 3. Long service life and low cost. 4. A simple drive circuit is enough. 5. Household gas leak alarm. 6. Industrial combustible gas alarm. 7. Portable gas detector.

SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original

SHT1x - Digital Temperature and Humidity Sensor (RH/T) SHT1x series SHT10 - low cost version, ±4.5% RH accuracy SHT11 - standard version, ±3% RH accuracy SHT15 - high-end version, ±2% RH accuracy

Resistive thin film pressure sensor comb type B structure flexible sensor

Terminal type A2 male terminal Female terminal Female terminal plastic shell A1 male terminal Range 1kg small force 10Kg middle force 50kg vigorously 100g micro force
Previous： Smart Electronics 100% New and Original Hot Sale Diodes TO-92 Wholesale Transistor C1815
Next： Smart Electronics STM32F107VCT6 32-bit microcontroller chip MCU microcontroller IC STM32F107
Return
TOP
86-755-83877216
smartbes
smartbes