Search

0.49 inch 0.5 inch OLED 64x32 ssd1315 0.49 OLED display screen highlighted OLED

Products > LED/LCD Module > 0.49 inch 0.5 inch OLED 64x32 ssd1315 0.49 OLED display screen highlighted OLED
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6

0.49 inch 0.5 inch OLED 64x32 ssd1315 0.49 OLED display screen highlighted OLED

shared：
0.49 inch OLED display 6432 OLED LCD screen ssd1315 display 0.5 inch OLEDscreen
Type
oled
Display Size
0.49 inch
Product Name
049 inch OLED monochrome display screen
Resolution
64 * 32
Working voltage
3.3V
Control chip
SSD1315
Display area
11.18 * 5.58 (mm)
Panel size
26.70*19.26*14 (mm)
Pixel spacing
0.175 * 0.175 (mm)
Pixel size
0.155 * 0.155 (mm)
Number of pins
4 (2.54mm spacing single row needle)
Working temperature
-40~70 °C
Perspective direction
full view
Interface type
 IIC interface


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor

MH-Z19B 0-5000PPM Mh-z19c 400-5000ppm C is an upgrade of B Carbon dioxide gold shell (non mh-z19) 400-5000ppm Carbon dioxide white shell (non mh-z19) 400-5000ppm

Mini Ble Audio Receiver Amplifier Board Module With Stereo Speakers

L298N motor driver board module intelligent vehicle robot accessory H-bridge drive stepper motor driver

ACS712ELC-05B 5A range ACS712 module AC current sensor module

1. Current sensor chip: ACS712ELC-05B; 2. Pin 5V power supply, onboard power indicator; 3. The module can measure plus or minus 5A current, corresponding to the analog output 185mV/A; 4. When no detection current passes, the output voltage is VCC/2; 5. PCB board size: 31(mm)x13(mm);

100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V

Operating voltage: Dual DC 10 - 45V recommended Dual DC 35V Rated output power :100W(4 Ohm ± 35V) Maximum output power : 150W (4 Ohm ± 45V) enormous heat, is not recommended PCB size :30 x 50 x 35mm Pitch : 5.08mm Hole distance between two power tube : 47mm

CSR8645 4.0 audio module, support APTx lossless compression speaker amplifier

The main control chip CSR8645 stereo audio module can make calls. The headset can be connected to 2 mobile phones at the same time. CSR has better sound quality. BLE 4.0, good wall penetration effect, APT-x high sound quality transmission.

Ultra-small quad-core A9 S5P4418 development board NanoPi Fire2A, support Ubuntu+Qt5.9

[Package selection] 1, the board 2, single board + heat sink 3, the basic package: single board + heat sink + power head + USB line 4, development package: single board + heat sink + power head + USB cable + TF card + card reader + USB to TTL board + serial expansion board + cross serial cable + cross network cable + DVP camera + USB camera [Screen selection] 1, no screen 2, 4.3 inch capacitive screen [Model: S430] 3, 7 inch capacitive screen [Model: X710]

0.96 Inch LED Display Module OLED With 12864 ICC Interface Module

BLE 4.0 serial port patch type cc2540 cc2541 data transparent transmission iBeacon module

☆Ultra-low standby power consumption 90uA~400uA ☆ Ultra-long connection distance 100 feet/60 meters ☆Super fast response speed 0.4 seconds ☆ Android, Apple, PC, MAC are all universal. ☆No byte limit for sending and receiving, up to 3K Bytes/sec ☆ No need to do MFI ☆ IOS system is perfectly supported. ☆Android 4.3 system is perfectly supported.

TPA3255 mono 600W high-power full frequency/subwoofer optional fever digital power amplifier board

TPA3255 is a high-performance class D power amplifier, it has class D efficiency and can bring true high-end sound quality. The device has an advanced integrated feedback design and a proprietary high-speed gate driver error correction function (PurePath™ Ultra HD). This technology allows the device to maintain ultra-low distortion throughout the audio frequency band while exhibiting wonderful sound quality.

New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module

Temperature (Operation): -20°C to 70°C Temperature (Stable Image) : 0°C to 50°C Focus :Fixed Object distance:30CM-∞ Resolution: 800LW/PH (Center) Working power supply : 3.3v(pin15) Operating system: for Raspberry Pi Certifications :FCC and CE Sensor Type: OV5647 (1/4” ) Active Array Size : 2592*1944 Sensitivity: 600mV/Lux-sec F/No: 2.35 EFL: 1.55 mm BFL(Optical): 3.1mm FOV: 160° TV Distortion :<14.5% Relative Illumination (Sensor) : 70% IR Filter : 650±10nm

Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense

Raspberry Pi Sense HAT provides power and data connectivity via the Raspberry Pi motherboard 40Pin GPIO interface. To create the "Astro Pi", the Sense HAT sensor module integrates common sensors, making it usable in a variety of different types of experiments, applications, and even It is a game.

DC 5V & DC12V ESP8266 WIFI 4-Channel Relay Module IoT Wireless Transmitter

ESP8266 WIFI 4-Channel Relay Module is 4 channel WIFI relay module carried a ESP8266 WIFI module and mature 8 bit MCU, with Professional switching power supply circuit.It could control the relay by Android phone APP within the local area network (LAN).It is easy to set .

RS422 to TTL/UART/MCU Serial Port Signal Mutual Module with Over-Voltage Over-Current Protection-3.3V

VCC: + 3.3V TXD : The module's TTL (UART) to send, connected to the microcontroller's RXD receiver pin; RXD : The module's TTL (UART) receiver, connected to the microcontroller TXD send pin; GND : The module ground wire (this wire must be connected with the ground wire of microcontroller system);

Original UNO R3 development board original single-chip C language programming learning motherboard kit
Previous： ESP32-S3 DevKitC-1 Development Board WROOM-1-N16R8 Module ESP32-C3
Next： ESP32-LyraT v4.3 voice and audio development board module is equipped with the ESP32 WROVER-E/WiFi module
Return
TOP
86-755-83877216
smartbes
smartbes