Film pressure sensor is piezoresistive, also known as resistive, equivalent to varistor in the circuit.
When the sensor has no external load, the circuit is in high resistance state (generally greater than 2m Ω).
When the external pressure is applied to the sensor, the circuit resistance will decrease (tens of K Ω or less).
With a multimeter, the resistance value can be read directly by connecting to two external terminals.
The resistance value changes with the change of external pressure. The voltage is inversely proportional
to the resistance, while the voltage カ is linearly related to the conductivity, so the pressure change can be
inversely deduced according to the conductivity change.

Terminal type
Male terminal
Female terminal

Pressure range
500g 2kg 5kg 10kg 20kg 40kg 60kg 100kg

IMS054-C04A (IMS-C04A) is a member of the single-node sensor family. They are all very reliable piezoresistive sensors, using A structure with double-sided silver electrodes. When the pressure (pressure) applied to the effective area of the sensor increases, the output resistance of the sensor decreases, and the single-point sensor can be measured with a multimeter or the customer's own circuit

The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.



The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb).
The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing
the drive voltage and adjusting the resistance of the feedback resistor.

The flexible sensor has the characteristics of flexible ultra-thin, ultra-low power consumption and extreme speed response, etc.
Small size, this flexible pressure sensor is based on new nanometer pressure-sensitive materials ​supplemented by ultra-thin film substrate.
This pressure sensor has the characteristic of high stability, high consistency.
Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.

This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate.

Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.

It has pressure sensitive function as well as water-resistant function.

When sensor detects outside pressure, the resistance of sensor will change.

Pressure signal can be converted into a corresponding electrical signal output using simple circuit.

Specification
Sensing Area: 1.27cm / 0.5"
Output Signal: Passive variable resistance
Force Sensing Range: 0g~10kg
Length: 6cm / 2.36"
Width: 1.9cm / 0.75"

Welcome to your kindly inquiry : )