Search

SHTC1 humidity and temperature sensor temperature sensor for agricultural

Products > Temperature and Humidity Sensor > SHTC1 humidity and temperature sensor temperature sensor for agricultural
    • 1

SHTC1 humidity and temperature sensor temperature sensor for agricultural

Datasheet SHTC1
Humidity and Temperature Sensor IC
Best performance-to-price ratio
Fully calibrated and reflow solderable
Ultra-low power consumption
Power-up and measurement within 1 ms
1.8 V supply voltage
Ultra-small DFN package : 2 x 2 x0 . 75 mm³
Typical accuracy : ± 3% RH and + 0.3 ºC
shared：



Datasheet SHTC1

Humidity and Temperature Sensor IC

Best performance-to-price ratio

Fully calibrated and reflow solderable

Ultra-low power consumption

Power-up and measurement within 1 ms

1.8 V supply voltage

Ultra-small DFN package : 2 x 2 x0 . 75 mm³

Typical accuracy : ± 3% RH and + 0.3 ºC



Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

M12 proximity switch sensor LJ12A3-4-Z/BX/BY/AX/AY/EX/DX/EZ/DZ normally open 24V

Current specification: 300mA Rated working voltage: DC: 6-36V Distance measurement: 4mm±10% Output mode: NPN NO (normally open) Level signal: low level Installation method: non-embedded Thread diameter: M12X1 Shell material: brass nickel plated Wire length: 1.2 meters

TO-92 Temperature sensor 18B20 Sensor Electronic chip IC for sensor hall electronic components

Condition:New Supply Voltage:standar Dissipation Power:standar Operating Temperature:standar Funtion:temperature sensor

MQ6 MQ-6 combustible gas/liquefied petroleum gas sensor probe dip6

Original imported flexiforce film pressure sensor A301 1/25/100lbs

The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications. The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb). The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.

Infrared temperature measurement sensor MLX90614ESF-BAA for infrared forehead thermometer

Product category: temperature sensor mounted on board Output type: Digital Configuration: Remote Accuracy: +/- 0.5 C Power supply voltage-minimum: 2.6 V Power supply voltage-maximum: 3.6 V Interface type: 2-Wire Resolution: 10 bit Minimum operating temperature:-40° C Maximum operating temperature: +85 °C Installation style: Through Hole Package / Box: TO-39-4 Package: Tube Temperature threshold: +380 °C Working power supply current: 1.3 mA Unit weight: 2 g

MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor

MH-Z19B 0-5000PPM Mh-z19c 400-5000ppm C is an upgrade of B Carbon dioxide gold shell (non mh-z19) 400-5000ppm Carbon dioxide white shell (non mh-z19) 400-5000ppm

41F bipolar latch 012 hall sensor AH41 sensor 43A Electric vehicle 43F electric motor SS41F SS443A

SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original

SHT1x - Digital Temperature and Humidity Sensor (RH/T) SHT1x series SHT10 - low cost version, ±4.5% RH accuracy SHT11 - standard version, ±3% RH accuracy SHT15 - high-end version, ±2% RH accuracy

Hall effect sensor ss49e 49e hall element oh49e

The 49E is a Hall-effect integrated circuit. The output voltage changes with the change of the magnetic flux density, and it can detect the slight change of the magnetic field. It can be used to measure the motion of objects, distance, position sensor, etc. It is alsosuitable for use in harsh environments or heavily polluted conditions.

WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor

MQ8 MQ-8 hydrogen sensor detection alarm module,Gas sensor module

The gas sensitive material used in the MQ-5 gas sensor is tin dioxide (SnO2), which has low conductivity in clean air. When there is combustible gas in the environment where the sensor is located, the conductivity of the sensor increases with the increase of the combustible gas concentration in the air.

MQ-3 detects alcohol sensor, ethanol sensor, combustible gas sensor probe

Feature Product model: MQ-3 Product Type: Semiconductor gas sensor Standard package: Bakelite (Black Bakelite) Detection gas: alcohol vapor Detection concentration: 0.04-4mg/L alcohol

DHT22 digital temperature and humidity sensor AM2302 temperature humidity module

Technical parameter Measuring range Temperature: -40….+80°℃ Humidity: 0...99.9%RH

Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136

The gas-sensitive material used in the MQ136 hydrogen sulfide gas sensor is tin dioxide (SnO2) with low conductivity in clean air. When there is hydrogen sulfide gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of hydrogen sulfide gas in the air increases. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration.

Original imported 0.2 "pressure sensor FSR400 Force sensitive resistor fsr sensor
Previous： Industrial-grade MINI I2C interface High-precision Si7021 temperature and humidity sensor
Next： SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original
Return
TOP
86-755-83877216
smartbes
smartbes