Search

FS200-SHT10-03I2C interface, new housing soil temperature and humidity sensor

Products > Custom Wire Cable > FS200-SHT10-03I2C interface, new housing soil temperature and humidity sensor
    • 1
    • 2
    • 3

FS200-SHT10-03I2C interface, new housing soil temperature and humidity sensor

Features:
Digitization, resolution up to 14bit
Internal self-calibration
Temperature and humidity are tightly combined to facilitate dew measurement
High reliability and long-term stability
I2C serial interface is easy to integrate
Exquisite product structure suitable for field application
shared：


The soil-type temperature and humidity probe adopts the original imported temperature and humidity sensor as the
core component, which can be directly connected to the single-chip microcomputer. It has very high consistency, can
be completely interchanged, and the humidity can reach up to ±4.5%RH. The protection of the copper sintered net
strengthens the temperature resistance, pressure resistance, and damage resistance of the probe. It is suitable for use
in agricultural greenhouses, flowers, nurseries, lawns and other occasions that need to detect soil temperature and humidity.

Model number : FS200-SHT10


Features:

Digitization, resolution up to 14bit Internal self-calibration Temperature and humidity are tightly combined to facilitate dew measurement High reliability and long-term stability I2C serial interface is easy to integrate Exquisite product structure suitable for field application

Technical Parameters:

Working voltage: 3.7~5V Humidity measurement range: 0～100%RH Temperature measurement range: -40～+123.8℃ Humidity measurement accuracy: ±4.5%RH Temperature measurement accuracy: ±0.5℃ Working environment humidity: 0～99%RH Working environment temperature: -40～+90℃ Cable: 4×0.12mm2 shielded cable, 1.5 meters in lengthTerminal definition:Red: power supply (Vcc) Green: Serial data (Sda) Yellow: Serial clock (Sck) Black: Ground (GND)




Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

NTC Probe for immersion sensor custom steel tube 50mm

1.sensor well for immersion sensor , custom steel tubes 50mm G1/2 legth 56mm 2.sensor well for immersion sensor custom steel tubes 80mm G1/2 legth 86mm

thermocouple K J E type rtd pt100 type industrial temperature sensor

RTD Pt100 Temperature Sensor Probe Length 5cm 1/2" NPT Thread w/ Detachable Connector

Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item

1M NTC Thermistor Accuracy Temperature Sensor 10K 1% 3950 Waterproof Probe

Features: High sensitivity and rapid response Small structure, easy installation, good waterproof Wide operating temperature zone, good stability and high reliability Can provide products with different R and B values, strong interchangeability and high precision

12V DC Power Cord 5.5*2.1mm Male Female Power Adapter Extension Cable 1m 2m 3m 5m 10m CCTV Camera Extend Wire For Home Appliance

Wire Color: Black Easy to install Save time Securer cable connection DC power jack - female + male connector Simply & Professional appearance for power cabling Easier for camera installation, save time and more securer cable connection, led strips. ect. No electrical tap, No splicing, no crimping, but only a small screw driver 5.5mm x 2.1mm Female power plug connector Internal diameter of the plug: 2.1mm

10 Meters 1007 26AWG 1.3mm PVC Wire Electronic Cables Insulated LED Cable

DC power cable 12V Plug DC Adapter cable Plug Connector for CCTV Camera DC plug 5.5*2.1mm 5.5x2.1

Specification: 100% brand new Use for: Led Driver/ Strip connector/ CCTV Camera DC 5.5*2.1mm Length: 27.5cm Max Current Rating: 5A Max Power Rating: 60W Transmission voltage: 1V~38V Usage temperature: -50 ~65 Material: Copper Wire Package included: 5pcs x 12V DC Power Female/male Jack Connector Cable

OK Wire, PCB Jumper Wire 30# Single Core Wire, Pure Copper Wire

10 Meters Gauge AWG Electrical Wire Tinned Copper Insulated PVC Extension LED Strip Cable Red Black Wire

DC 20KV pulse 30KV flame-retardant high-voltage insulated wire 1 meter

Low voltage 2pin LED monochrome lamp with extension cable, 2-core power cord 18/20/22 AWG 0.3 wire

T106 waterproof temperature probe thermal resistance sensor thermistor 10K B3435

Product name: Waterproof probe sensor Product model: T106 Resistance type: NTC10K thermistor Detection accuracy: ±1℃ Plug type: XH2.54-2 pin plug (2P) Measuring temperature: -50°C~110°C Wire material: stranded copper wire tinned sheath Product length: 0.5m/1m/2m/3m/ customized

PT100 PT1000 K/E type glass fiber wire thermocouple sensor

Specifications: Product Name: m6m8 screw thermocouple Graduation: K / E type Lead length: 0.5m-10m (special length can be made on site) Screw length: 17mm Thread length: 10 mm Temperature range: 0-700 degrees

Stainless steel sheath and waterproof NTC temperature sensor 10K 1%, ntc thermistor 10K

1. Wide operating temperature range, good stability and reliability. 2. Easy to installation and manipulation as the sealing can be done according to environment and conditions there it is applied by customer. 3. Accurate testing can reflect temperature change precisely. 4. Insulating resistance(MΩ): more than 100MΩ 5. Working temperature range(celsius): -40 to +100 6. Dissipation factor(mw/celsius): 5-15 (in still air) 7. Thermal time constant(s): 20-50 (in air)

Costom steel tube threades sleeve stainless steel temperature sensor NTC thermostat probe

Costom steel tube threades sleeve stainless steel temperature sensor NTC thermostat probe
Previous： Temperature sensor probe/platinum resistance PT100 stainless steel shell
Next： Stainless steel sheath and waterproof NTC temperature sensor 10K 1%, ntc thermistor 10K
Return
TOP
86-755-83877216
smartbes
smartbes