Search

TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB

Products > Other Module > TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB
    • 1
    • 2
    • 3

TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB

Model: TDA7293/TDA7294
Power supply: double AC 15V to 36V (AC needs rectification and filtering) or DC positive and negative
18V to 50V.Recommended double 35V (Note that it is not a dual 35V transformer, it is positive and
negative 35V DC. And It is recommended to double 26V/200W toroidal transformer, after rectification
voltage is about DC double 35V).
shared：



Features:


Model: TDA7293/TDA7294
Power supply: double AC 15V to 36V (AC needs rectification and filtering) or DC positive and negative
18V to 50V.Recommended double 35V (Note that it is not a dual 35V transformer, it is positive and
negative 35V DC. And It is recommended to double 26V/200W toroidal transformer, after rectification
voltage is about DC double 35V).

Reminder: The battery can be used! (Must be a battery in series).
Transformer power: The power of the power supply transformer should not be less than 200w
when the two channels are used. The power of the power supply transformer should not be less
than 100W when mono.

The power supply rectifier filter: the total of the two channels should not be less than 40,000 uF,
the rectifier bridge is preferably 25A or more.
Output power: maximum output power 85W
Midpoint voltage: less than 1mV
Load: It can promote large-scale floor-standing speakers for home use.
Radiator: According to the supply voltage, the power supply has a high heat output and a large output power.
Plate material: FR4 double-sided fiberglass board, 2 amps of copper, blue ink, double-sided spray tin.
Dimensions: 3.5x5cm/1.38x1.97inch
Color: As shown
Quantity: 1 Pc

Note:
1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Thank you!

 



Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

NRF52832 Low Power Ble 4.2 Module 2.4G Wireless Module BLE4.0 4.2 Module

High Power TDA3116D2 Two Channel Audio Digital Amplifier Board 12-24V 100Wx2

Item: XH-M190 Name: Digital Audio Amplifier Model: XH-M190 The number of chips: dual-core chips Chip Name: TPA3116D2 Input power: DC12V-24V Output power: 100Wx2 Input Impedance: 51Kx2 Power efficiency:> 90% Output resistance: 4-8Ohm Frequency range: 14-100KHz Noise ratio: 100db Output channel: left and right dual channel Size: 105 * 65 * 23MM Net weight: 90g

ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module

The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleepcurrent and a minimum of 6mA. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.

TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories

The module is a capacitive touch switch module based on touch detection IC (ttp223b). Under normal condition,the module outputs low level and the mode is low power consumption mode; when touching the corresponding position with fingers, the module outputs high level and the mode switches to fast mode; when there is no touch for 12 seconds, the mode switches to low power consumption mode.

STM32F103C8T6 ARM STM32 Minimum System Development Board Module

CH32F103C8T6 chip is compatible with STM32F103C8T6 series chips, all pins are compatible, all registers are compatible.

CC1101 Intelligent Industrial Wireless RF Communication Module SPI Transceiver Module 868MHz

Features: 1.Low power UHF wireless transceivers @ 868MHZ 2.Support FSK , GFSK , ASK / OOK and MSK 3.Configurable data rate 1.2K to 500kps 4.Two 64 bytes FIFO for TX & RX buffer 5.Packet handling including address recognition 6.Support Wake-on-radio 7.Support Clear Channel Assessment（Listen-before-talk ) 8.RSSI Output &Link Quality Indictor 9.SPI Interface 10.Wide Operating Voltage 1.8-3.6V

LORA RFM95 RFM95W 868 915 RFM95-868MHz RFM95-915MHz SX1276 wireless transceiver module

The RFM95 transceiver is a LoRaTM remote communication module, which provides ultra long distance spread spectrum communication and has super strong anti-interference capability and ultra low current consumption.

Rotating potentiometer knob cap Digital control module Rotary encoder module

Digital control module Rotary encoder module rotating potentiometer knob cap Working voltage: 5 v A circle of pulse count: 20 Rotary encoder through rotation direction and reverse direction can count is in the process of the number of output pulse, rotating counter unlike potentiometer, the rotation count there is no limit.Cooperate with the buttons on the rotary encoder, can be reset to the initial state, that is, from zero start counting.

HW-658 GSM/GPRS Mould USB GPS Module For Raspberry Pi

Suitable For Raspberry Pi A B A+ B+ Zero 2 3. Connect via 1*8 2.54 separation distance pin header or USB micro data cable. Adopting L80-39 mould project, with 15 x 15 x 4mm Patch aerial. Super low power consumption, quick location. Support Short-circuit Protection and Aerial Detection. Support self-auxiliary AGPS (EASY technology), no need of external memory. Support LOCUS, DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN).

TTP223 touch button module self-locking inching capacitor switch single circuit reconstruction

TTP223 touch button module self-locking inching capacitor switch single circuit reconstruction (D2A4) Size:15mmX11MM Supply:2.5v-5.5v

Wedding special igniter 12V DC universal high voltage generator pulse high voltage module output 60KV arc

100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V

Operating voltage: Dual DC 10 - 45V recommended Dual DC 35V Rated output power :100W(4 Ohm ± 35V) Maximum output power : 150W (4 Ohm ± 45V) enormous heat, is not recommended PCB size :30 x 50 x 35mm Pitch : 5.08mm Hole distance between two power tube : 47mm

BLE 4.0 serial port patch type cc2540 cc2541 data transparent transmission iBeacon module

☆Ultra-low standby power consumption 90uA~400uA ☆ Ultra-long connection distance 100 feet/60 meters ☆Super fast response speed 0.4 seconds ☆ Android, Apple, PC, MAC are all universal. ☆No byte limit for sending and receiving, up to 3K Bytes/sec ☆ No need to do MFI ☆ IOS system is perfectly supported. ☆Android 4.3 system is perfectly supported.
Previous： Mini Ble Audio Receiver Amplifier Board Module With Stereo Speakers
Next： Raspberry Pi 3B/4B touch screen 3.5 inch resistive touch screen RaspberryPI
Return
TOP
86-755-83877216
smartbes
smartbes