Search
RASPBERRY PI COMPUTE MODULE 3 CM3/CM3+ 8GB 16GB 32GB MOTHERBOARD
RASPBERRY PI COMPUTE MODULE 3 CM3/CM3+ 8GB 16GB 32GB MOTHERBOARD
The Compute Module 3 is a Raspberry Pi 3 in a more flexible form factor, intended for industrial application.
shared：
Overview:
The Compute Module 3 is a Raspberry Pi 3 in a more flexible form factor, intended for industrial application.
The Compute Module 3 contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM) as well as a 4GB eMMC
Flash device (which is the equivalent of the SD card in the Pi). The Pi 3 has a processor speed of 1.2GHz and runs at roughly 10
times the speed of the Pi 1 due to its quad-core CPU. This is all integrated on to a small 67.6mm x 31mm board which fits into a
standard DDR2 SODIMM connector (the same type of connector as used for laptop memory). The Flash memory is connected
directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins.
You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available as compared
to the Raspberry Pi), and designing the Module into a custom system should be relatively straightforward as we’ve put all the
tricky bits onto theModule itself.
Flash device (which is the equivalent of the SD card in the Pi). The Pi 3 has a processor speed of 1.2GHz and runs at roughly 10
times the speed of the Pi 1 due to its quad-core CPU. This is all integrated on to a small 67.6mm x 31mm board which fits into a
standard DDR2 SODIMM connector (the same type of connector as used for laptop memory). The Flash memory is connected
directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins.
You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available as compared
to the Raspberry Pi), and designing the Module into a custom system should be relatively straightforward as we’ve put all the
tricky bits onto theModule itself.
The Compute Module is available for purchase in single units, or in batches of hundreds or thousands. To get started designing
a PCB to use the Module, we provide an open-source breakout board with a single Module in an affordable CM IO Board .
Packing Included:
a PCB to use the Module, we provide an open-source breakout board with a single Module in an affordable CM IO Board .
Packing Included:
1 x Raspberry Pi Compute Module 3 Board
- Name
- Phone
- Corporate name
- Address
- Leaving Message*
CONTACT INFO Shenzhen Smart Electronics Co., Ltd
|
|
Copyright © 2021 Shenzhen Smart Electronics Co., Ltd All rights reserved