Search

74HC595 driver 8-digit digital tube display module

Products > Modules > 74HC595 driver 8-digit digital tube display module
    • 1
    • 2
    • 3
    • 4
    • 5

74HC595 driver 8-digit digital tube display module

1. Two 595 digital tubes are used to drive the digital tube, which needs 3 IO ports of single chip microcomputer, and it is displayed according to the principle of dynamic scanning of digital tube;

2. wide working voltage 3.3V to 5V;

3. PCB size: 71mm * 22mm

4. digital tube model: 0.364 bits
shared：

Characteristic
1. Two 595 digital tubes are used to drive the digital tube, which needs 3 IO ports of single chip
microcomputer, and it is displayed according to the principle of dynamic scanning of digital tube;
2. wide working voltage 3.3V to 5V;
3. PCB size: 71mm * 22mm
4. digital tube model: 0.364 bits

 

Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)

DIY Ble 5.0 Audio Receiver Module MP3 Ble Decoder Board Car Audio Speaker 4.1

0.96 Inch LED Display Module OLED With 12864 ICC Interface Module

NRF52832 Low Power Ble 4.2 Module 2.4G Wireless Module BLE4.0 4.2 Module

Rotating potentiometer knob cap Digital control module Rotary encoder module

Digital control module Rotary encoder module rotating potentiometer knob cap Working voltage: 5 v A circle of pulse count: 20 Rotary encoder through rotation direction and reverse direction can count is in the process of the number of output pulse, rotating counter unlike potentiometer, the rotation count there is no limit.Cooperate with the buttons on the rotary encoder, can be reset to the initial state, that is, from zero start counting.

CC1101 Intelligent Industrial Wireless RF Communication Module SPI Transceiver Module 868MHz

Features: 1.Low power UHF wireless transceivers @ 868MHZ 2.Support FSK , GFSK , ASK / OOK and MSK 3.Configurable data rate 1.2K to 500kps 4.Two 64 bytes FIFO for TX & RX buffer 5.Packet handling including address recognition 6.Support Wake-on-radio 7.Support Clear Channel Assessment（Listen-before-talk ) 8.RSSI Output &Link Quality Indictor 9.SPI Interface 10.Wide Operating Voltage 1.8-3.6V

TPA3110 XH-A232 30W+30W 2.0 Channel Digital Stereo Audio Power Amplifier DC 8-26V 3A C6-001 3110 Amplifier Board

TPA3255 mono 600W high-power full frequency/subwoofer optional fever digital power amplifier board

TPA3255 is a high-performance class D power amplifier, it has class D efficiency and can bring true high-end sound quality. The device has an advanced integrated feedback design and a proprietary high-speed gate driver error correction function (PurePath™ Ultra HD). This technology allows the device to maintain ultra-low distortion throughout the audio frequency band while exhibiting wonderful sound quality.

GY-BME/BMP280 3.3V-5V temperature and humidity/atmospheric pressure sensor module

GSM module, SIM808 Module with GPS antenna GSM GPRS GPS development board

This module is 5-12V power supply, when the power supply is less than 9V, 2A DC is required. The other power supply port is 3.5-4.2V, suitable for lithium battery power supply. The computer can debug USB-TTL. Suitable for portable. Two sets of antenna SMA ports, GPS and GSM antennas are provided.

W1209 LED Digital Thermostat Temperature Control Thermometer Thermo Controller Switch Module DC 12V Waterproof NTC Sensor

Temperature range :-50-110 ° Dimensions: 48.5 * 40mm Temperature control mode: ON / OFF Resolution:When temperature is 0.1°, the resolution is -9.9~99.9, other temperature segment is 1° Control accuracy: 0.1 ° Hysteresis accuracy: 0.1° Refresh rate: 0.5S High temperature protection: 0-110° Supply voltage: DC 12V Static current: ≤ 35MA, attract current ≤ 65MA Output voltage: DC 12V Output power: 20A relay

PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply)

Product Name: pam8403 digital power amplifier board Specification and model: gf1002 Power supply range: 5V DC Minimum output: 3W * 2 Appearance size: 29.5 * 20.2 * 15mm (excluding protruding potentiometer rod)

Nano V3.0 CH340 improved version Atmega328P USB to TTL with USB cable

Technical parameters : 1.12 digital input / output port D2 to D13 2.8 analog inputs A0 ~ A7 3.1 pairs TTL level serial transceiver port RX / TX 4.6 PWM port , D3 , D5, D6, D9 , D10 , D11 5. Atmel ATmega328P - AU MCU 6 USB download and power 7. Support the external 5V ... 12V DC power supply 8. To support 9V battery powered 9. support ISP download

TTGO T-Display ESP32 WiFi And Ble Module Development Board

Chipset： ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH： QSPI flash 4MB SRAM： 520 kB SRAM Button： Reset USB to TTL： CP2104 Modular interface： UART,SPI,SDIO,I2C,LED PWM,TV PWM,I2S,IRGPIO,ADC,capacitor touch sensor,DACLNA pre-amplifier

5A DC to DC CC CV Lithium Battery Step down Charging Board Led Power Converter module XL4015

Three in one: (1) Use as an ordinary step-down module with over-current protection capability; (2) Used as a charger for various voltage values of lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery pack), used in solar panels, wind turbines and other occasions; (3) Use as a high-power LED constant current drive module
Previous： MQ-4 Gas Sensor Methane Module MQ4 Gas Methane Sensor Module for Arduinos
Next： Electronic components supplier sourcing service,ICS,diodes, triodes, transistors, capacitors, LEDs, etc
Return
TOP
86-755-83877216
smartbes
smartbes