Search

Smart Electronics SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original

Products > Sensor Module > Smart Electronics SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original
    • 1

Smart Electronics SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original

SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original

SHT1x - Digital Temperature and Humidity Sensor (RH/T)
SHT1x series
SHT10 - low cost version, ±4.5% RH accuracy
SHT11 - standard version, ±3% RH accuracy
SHT15 - high-end version, ±2% RH accuracy
shared：

Characteristics
Dimensions: 7.5 x 4.9 x 2.6 mm
Output: digital (2-wire interface)
Supply voltage range: 2.4 to 5.5 V
Energy consumption: 80μW (at 12-bit, 3V, 1 measurement/second)
RH working range: 0 - 100% RH
T working range: -40 to +125 ° C (-40 to +257 ° F)
RH response time: 8 seconds (tau63%)

 

Packing specification:
Tape and reel, sealed in anti-static bag
SHT10: 2000 tablets
SHT11: 100, 400 or 2000 pieces
SHT15: 100 or 400 pieces

 

Product model: SHT10
Product category: (economical) humidity sensor
-SHT10 series is a patch type temperature and humidity sensor chip
- full scale calibration, two-wire digital output;
- Humidity measurement range: 0 ~ 100% RH;
- Temperature measurement range: -40 to +123.8 °C;
- Humidity measurement accuracy: ±4.5% RH
- Temperature measurement accuracy: ±0.5°C
- Response time: 8s (tau63%);
- Low power consumption 80μW (12-bit measurement, 1 time / s);
- Can be completely submerged.

 

Application areas:
Data collectors, transmitters, automated process control, automotive industry, building control & HVAC, electricity,
metrology testing, pharmaceutical




Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element

MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element Product model: MQ135 Product Type: Semiconductor gas sensor Standard package: Bakelite (Black Bakelite) Detection gas: ammonia, sulfide, benzene vapor Detection concentration: 10-1000ppm (ammonia, toluene, hydrogen) Standard circuit conditions Loop voltage Vc: ≤24VDC Heating voltage VH: 5.0V±0.2 V ACORDC Load resistance RL: adjustable

Smart Electronics Si7021 Temperature and Humidity Sensor Module High Accuracy I2C Interface Industrial SI7021-A20-GM1R Module

Si7021 Temperature and Humidity Sensor Module High Accuracy I2C Interface Industrial SI7021-A20-GM1R Module

Smart Electronics Resistive thin film pressure sensor comb type B structure flexible sensor

Resistive thin film pressure sensor comb type B structure flexible sensor Terminal type A2 male terminal Female terminal Female terminal plastic shell A1 male terminal Range 1kg small force 10Kg middle force 50kg vigorously 100g micro force

Smart Electronics TO-92 Temperature sensor 18B20 Sensor Electronic chip IC for sensor hall electronic components

TO-92 Temperature sensor 18B20 Sensor Electronic chip IC for sensor hall electronic components Condition:New Supply Voltage:standar Dissipation Power:standar Operating Temperature:standar Funtion:temperature sensor

Electronics Customized SS 304 Stainless steel pipe double ferrule compression connector tube

Smart Electronics MQ2 Mq-2 gas sensor probe

MQ2 Mq-2 gas sensor probe 1. Good sensitivity to combustible gas in a wide concentration range. 2. High sensitivity to methane 3. Long service life and low cost. 4. A simple drive circuit is enough. 5. Household gas leak alarm. 6. Industrial combustible gas alarm. 7. Portable gas detector.

Smart Electronics Hall sensor A1344EUA-T AH3144E High sensitivity 402 switch 44E

Hall sensor A1344EUA-T AH3144E High sensitivity 402 switch 44E

Smart Electronics Ozone gas sensor module ZE25-O3

Ozone gas sensor module ZE25-O3 The ZE25-O3 electrochemical ozone module is a general-purpose, compact module. The electrochemical principle is used to detect the ozone gas present in the air, which has good selectivity and stability. Built-in temperature sensor for temperature compensation; digital output and analog voltage output for easy use. ZE25-O3 is a universal gas module designed and manufactured by combining sophisticated electrochemical detection technology with sophisticated circuit design.

Smart Electronics High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor

High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor Film pressure sensor is piezoresistive, also known as resistive, equivalent to varistor in the circuit. When the sensor has no external load, the circuit is in high resistance state (generally greater than 2m Ω). When the external pressure is applied to the sensor, the circuit resistance will decrease (tens of K Ω or less). With a multimeter, the resistance value can be read directly by connecting to two external terminals. The resistance value changes with the change of external pressure. The voltage is inversely proportional to the resistance, while the voltage カ is linearly related to the conductivity, so the pressure change can be inversely deduced according to the conductivity change.

Smart Electronics MQ6 MQ-6 combustible gas/liquefied petroleum gas sensor probe dip6

MQ6 MQ-6 combustible gas/liquefied petroleum gas sensor probe dip6

Customized 304 capillary tube/stainless steel seamless pipe, hollow round tube

Smart Electronics Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136

Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136 The gas-sensitive material used in the MQ136 hydrogen sulfide gas sensor is tin dioxide (SnO2) with low conductivity in clean air. When there is hydrogen sulfide gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of hydrogen sulfide gas in the air increases. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration.

Smart Electronics Thin film pressure sensor resistive force sensitive and pressure sensitive plantar flexible PVDF robot tactile FSR402 406

Thin film pressure sensor resistive force sensitive and pressure sensitive plantar flexible PVDF robot tactile FSR402 406

Smart Electronics PT100 temperature sensor thermal resistance thermocouple WZP-035 probe waterproof and corrosion resistant high temperature

PT100 temperature sensor thermal resistance thermocouple WZP-035 probe waterproof and corrosion resistant high temperature Non-standard customization High temperature thermal resistance 450 degree specification price as above NTC thermal 4*30*2 meters K type PTFE low temperature 200 degrees 2*30mm*1m A grade three core

Smart Electronics Original imported flexiforce film pressure sensor A301 1/25/100lbs

Original imported flexiforce film pressure sensor A301 1/25/100lbs The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications. The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb). The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.

Smart Electronics MQ-9 carbon monoxide Combustible gas sensor alarm module

MQ-9 carbon monoxide Combustible gas sensor alarm module Feature: Size: 32mm * 22mm * 27mm Main chip: LM393, MQ-9 gas sensors Working voltage: DC 5 V Characteristics: 1, having a signal output instruction. 2, dual signal output (analog output, and TTL level output) 3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller) 4, 0 - 5V analog output voltage, the higher the concentration the higher the voltage. 5, for CO, gas, liquefied petroleum gas with high sensitivity and good selectivity. 6, has a long life and reliable stability 7, rapid response and recovery characteristics Application: MQ-9 sensor main family, environmental detection of carbon monoxide gas for CO, gas, liquefied petroleum gas field testing;

Smart Electronics HAL506 UA-2 TO92-UA Automotive Hall Sensor

HAL506 UA-2 TO92-UA Automotive Hall Sensor Model: HAL506 UA-2 Description: TO92-UA Packaging: CutTape(CT) AlternatePackaging Series: HAL®5xy Part status: LastTimeBuy Technology: Hall Effect Voltage-power supply: 3.8V~24V Current-power supply (maximum): 5.2mA Current-output (maximum): 20mA Output type: OpenDrain Feature: TemperatureCompensated Working temperature: -40°C~140°C (TJ) Installation type: ThroughHole Supplier device package: TO-92UA-2 Package/Shell: TO-226-3TO-92-3ShortBody

Smart Electronics Original imported 0.2 "pressure sensor FSR400 Force sensitive resistor fsr sensor

Original imported 0.2 "pressure sensor FSR400 Force sensitive resistor fsr sensor

Smart Electronics TGS822 TGS 822 alcohol gas sensor

TGS822 TGS 822 alcohol gas sensor Parameters: Alcohol measurement range: 50-5,000ppm Sensitivity (resistance ratio): 0.40 ± 0.1 Circuit voltage: 24V (DC/AC) Heater voltage: 5V±0.2V(AC/DC)
Previous： Smart Electronics SHTC1 humidity and temperature sensor temperature sensor for agricultural
Next： Smart Electronics AM2305 Digital temperature and humidity sensor
Return
TOP
86-755-83877216
smartbes
smartbes