Search

Smart Electronics MLX90640BAA/B 32 * 24 infrared temperature measurement dot matrix sensor module Infrared imaging/IR thermal imager camera module

Products > Module > Smart Electronics MLX90640BAA/B 32 * 24 infrared temperature measurement dot matrix sensor module Infrared imaging/IR thermal imager camera module
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6

Smart Electronics MLX90640BAA/B 32 * 24 infrared temperature measurement dot matrix sensor module Infrared imaging/IR thermal imager camera module

MLX90640BAA/B 32 * 24 infrared temperature measurement dot matrix sensor module Infrared imaging/IR thermal imager camera module

SKU1-MLX90640ESF-BAB-000-TU probe
SKU2-MLX90640ESF-BAA probe
SKU3-MLX90640ESF-BAA module
SKU4-MLX90640ESF-BAB module
SKU5-GY-LCD90640-BAB with screen housing
SKU6-GY-MODBUS-90640BAB Metal Tube MODBUS Protocol
SKU7-GY-IR8062 80 * 60 resolution TTL output

MLX90640BAA field of view 110 * 75 degrees (large angle, suitable for close measurement)
MLX90640BAB field of view angle 55 * 35 degrees (small angle, suitable for long-distance measurement)
shared：

Purchase Notes

This product link contains seven SKU. The price of each SKU is different. Please specify which SKU

you need, and then ask the salesman for a quotation.

Model Number
SKU1-MLX90640ESF-BAB-000-TU probe 
SKU2-MLX90640ESF-BAA probe 
SKU3-MLX90640ESF-BAA module 
SKU4-MLX90640ESF-BAB module 
SKU5-GY-LCD90640-BAB with screen housing 
SKU6-GY-MODBUS-90640BAB Metal Tube MODBUS Protocol 
SKU7-GY-IR8062 80 * 60 resolution TTL output
Measurement range
-40 °~300 °
Resolution
0.1 °
Measurement accuracy
± 2
Repetitive accuracy
± 2
Response frequency
8Hz (460800bps)
Working voltage
3-5 V
Working current
42mA
Working temperature
-20 °~85 °
Storage temperature
-40 ° C~125 ° C
Size
15.5mm × 25mm
MLX90640BAA field of view 110 * 75 degrees (large angle, suitable for close measurement) MLX90640BAB field of view angle 55 * 35 degrees (small angle, suitable for long-distance measurement)
AboutInfrared imaging/R thermal imaging module


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories

TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories The module is a capacitive touch switch module based on touch detection IC (ttp223b). Under normal condition,the module outputs low level and the mode is low power consumption mode; when touching the corresponding position with fingers, the module outputs high level and the mode switches to fast mode; when there is no touch for 12 seconds, the mode switches to low power consumption mode.

DC-DC XL7015 module 5V-80V 0.8A Dc converter Step-down module Wide voltage input better than XL7005A

Smart Electronics Thermoelectric Peltier Refrigeration Cooling System Kit Cooler for DIY TEC-12706 mini air conditioner

Thermoelectric Peltier Refrigeration Cooling System Kit Cooler for DIY TEC-12706 mini air conditioner Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor ​Technologies and electronic assembly techniques. Here is the Kit you can made cooling system for yourself easy and fun Enjoy the DIY

Smart Electronics JDY-08 blue tooth 4.0BLE low-power CC2541 master-slave integrated support airsync iBeacon module

JDY-08 blue tooth 4.0 BLE low-power CC2541 master-slave integrated support airsync iBeacon module

Smart Electronics CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

Smart Electronics 5M-6GHz Gain 20dB hf ultra breitband amplifier 6g ultra wideband medium power RF amplifier with Shielded Case

5M-6GHz Gain 20dB hf ultra breitband amplifier 6g ultra wideband medium power RF amplifier with Shielded Case

Smart Electronics DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module

DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module product description: Power amplifier chip: TPA3118 Amplifier power: 1*60W Supply voltage: 8~24VDC Speaker impedance: 4-8Ω Size: 46*35*1.6mm (length, width and thickness) Total height of the board: 12mm

Smart Electronics 360 Degrees Rotary Encoder Module Brick Sensor Switch Development KY-040

360 Degrees Rotary Encoder Module Brick Sensor Switch Development KY-040

Smart Electronics HC-SR04 SR04P ultrasonic sensor Module

HC-SR04 SR04P ultrasonic sensor Module

Smart Electronics CC1101 Intelligent Industrial Wireless RF Communication Module SPI Transceiver Module 868MHz

CC1101 Intelligent Industrial Wireless RF Communication Module SPI Transceiver Module 868MHz Features: 1.Low power UHF wireless transceivers @ 868MHZ 2.Support FSK , GFSK , ASK / OOK and MSK 3.Configurable data rate 1.2K to 500kps 4.Two 64 bytes FIFO for TX & RX buffer 5.Packet handling including address recognition 6.Support Wake-on-radio 7.Support Clear Channel Assessment（Listen-before-talk ) 8.RSSI Output &Link Quality Indictor 9.SPI Interface 10.Wide Operating Voltage 1.8-3.6V

Smart Electronics HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module

HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module Product model: HC-08 Working frequency band: 2.4G Communication interface: UART3.3VTL level Working voltage: 3.0-3.6V RSSI support: not supported Communication level: 3.3V Transmission power: 4dBm Reference distance: 80 meters Air speed: 2Mbps Antenna interface: built-in PCB antenna Communication current: 0.4uA Receiving sensitivity: 85dbm@2Mbps Working humidity: 10%~90% Storage temperature: 40 ℃ -+80 ℃ Working temperature: -25 ℃ -75 ℃

Smart Electronics JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module

JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module Model: JDY-34 Antenna type: PCB board mounted antenna Working frequency band: 2.4G Transmission power: 4dB (peak) Communication interface: UART Working voltage: 2.1V-3.6V Working temperature: -40 ° C-80 ° C Receiving sensitivity: -91dbm Transmission distance: 40 meters Module size: 27 * 12.88 * 1.8mm Bluetooth version: BLE4.2+SSP dual-mode (backward compatible with 4.2, 4.0, 3.0, 2.1, 2.0) Transmission rate: BLE14 K Bytes/s SPP 40K byte/s (Android or computer Bluetooth tested 40K byte/s speed) Command parameter saving: parameter configuration and power-off data are saved SIM welding temperature:<260 ℃ Working current: 15mA

Smart Electronics 300W 20A DC-DC Buck Converter Step Down Module Constant Current LED Driver Power Step Down Voltage Module

300W 20A DC-DC Buck Converter Step Down Module Constant Current LED Driver Power Step Down Voltage Module

Smart Electronics MT3608 dc to dc step up booster module 28V 2A Adjustable Boost Converter Module

MT3608 dc to dc step up booster module 28V 2A Adjustable Boost Converter Module

16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685 DIY Servo Shield Module

Smart Electronics TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB

TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB Model: TDA7293/TDA7294 Power supply: double AC 15V to 36V (AC needs rectification and filtering) or DC positive and negative 18V to 50V.Recommended double 35V (Note that it is not a dual 35V transformer, it is positive and negative 35V DC. And It is recommended to double 26V/200W toroidal transformer, after rectification voltage is about DC double 35V).

Smart Electronics Wireless remote control telescopic sliding gate EV1527 learning code alarm 433Mhz module

Wireless remote control telescopic sliding gate EV1527 learning code alarm 433Mhz module

Smart Electronics Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense

Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense Raspberry Pi Sense HAT provides power and data connectivity via the Raspberry Pi motherboard 40Pin GPIO interface. To create the "Astro Pi", the Sense HAT sensor module integrates common sensors, making it usable in a variety of different types of experiments, applications, and even It is a game.

Smart Electronics JDY08 Ble 4.0 BLE low-power CC2541 master-slave integrated airsync iBeacon Ble module

JDY08 Ble 4.0 BLE low-power CC2541 master-slave integrated airsync iBeacon Ble module Feature The JDY-08 transparent transmission module is based on the Bluetooth 4.0 protocol standard, with a working frequency range of 2.4GHz and a modulation method of GFSK. The maximum transmission power is 0dB and the maximum transmission distance is 80 meters. It adopts the TCC2541 chip design and supports users to modify device names, service UUID, transmission power, pairing passwords and other instructions through AT commands, making it convenient, fast, and flexible to use.
Previous： Smart Electronics XH-M131 5V 12V 24V Light Control Switch Photoresistor Relay Module Detection Sensor 10A brightness Automatic Control Module
Next： Smart Electronics New Original SIMCOM SIM7000A SIM7000G SIM7000E, NB/CAT-M/GSM Module
Return
TOP
86-755-83877216
smartbes
smartbes