Search

DHT22 digital temperature and humidity sensor AM2302 temperature humidity module

Products > Temperature and Humidity Sensor > DHT22 digital temperature and humidity sensor AM2302 temperature humidity module
    • 1
    • 2

DHT22 digital temperature and humidity sensor AM2302 temperature humidity module

Technical parameter

Measuring range

Temperature: -40….+80°℃

Humidity: 0...99.9%RH
shared：



technical parameter

Measuring range

Temperature: -40….+80°℃

Humidity: 0...99.9%RH


Accuracy (under 25℃ environment):

Temperature: ±0.5℃

Humidity ±2%RH (10..90%RH)


Resolution: Temperature: 0.1℃ Humidity: 0.1%RH


Attenuation value: Temperature: <1℃/year Humidity: <1%RH/year


sensor type

Temperature: resistive sensor Humidity: capacitive sensor


Response time: Temperature: 5s Humidity: 5s 1/e (63%)

Operating temperature range: -40...+80°C

Power supply: DC: 3.3~5.5V

Shell material: PC plastic

Weight: 1g




Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136

The gas-sensitive material used in the MQ136 hydrogen sulfide gas sensor is tin dioxide (SnO2) with low conductivity in clean air. When there is hydrogen sulfide gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of hydrogen sulfide gas in the air increases. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration.

SHTC1 humidity and temperature sensor temperature sensor for agricultural

Datasheet SHTC1 Humidity and Temperature Sensor IC Best performance-to-price ratio Fully calibrated and reflow solderable Ultra-low power consumption Power-up and measurement within 1 ms 1.8 V supply voltage Ultra-small DFN package : 2 x 2 x0 . 75 mm³ Typical accuracy : ± 3% RH and + 0.3 ºC

Industrial-grade MINI I2C interface High-precision Si7021 temperature and humidity sensor

Working voltage: 1.9-3.6V (3.3V recommended) Standby current: 60nA Temperature range: -40-85°C (recommended -10-60°C) Temperature accuracy: ±0.4℃ (-10-85℃) Humidity range: 0-RH (20%-80%RH recommended) Humidity accuracy: ±3%RH (0-80%RH) Temperature conversion time: 7ms Humidity conversion time: 17ms (temperature conversion will be performed automatically when humidity conversion is performed) Interface type: I2C 2.54mm pitch pad Module size: 8.5X10mm

Thin film pressure sensor resistive force sensitive and pressure sensitive plantar flexible PVDF robot tactile FSR402 406

SS495A SS495A1 hall sensor Magnetic sensors Hall-Effect

Electronics Customized SS 304 Stainless steel pipe double ferrule compression connector tube

RTD Pt100 Temperature Sensor Probe Length 5cm 1/2" NPT Thread w/ Detachable Connector

Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item

MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor

MH-Z19B 0-5000PPM Mh-z19c 400-5000ppm C is an upgrade of B Carbon dioxide gold shell (non mh-z19) 400-5000ppm Carbon dioxide white shell (non mh-z19) 400-5000ppm

FSR402 Force Sensing Resistor Long Tail Resistance-type Thin Film Pressure Sensor

Specification Sensing Area: 1.27cm / 0.5" Output Signal: Passive variable resistance Force Sensing Range: 0g~10kg Length: 6cm / 2.36" Width: 1.9cm / 0.75" Welcome to your kindly inquiry : )

Force Sensor RP-C18.3-ST Flexible Thin Film Pressure Sensor Intelligent 20g-6kg

The flexible sensor has the characteristics of flexible ultra-thin, ultra-low power consumption and extreme speed response, etc. Small size, this flexible pressure sensor is based on new nanometer pressure-sensitive materials ​supplemented by ultra-thin film substrate. This pressure sensor has the characteristic of high stability, high consistency. Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.

WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor

TGS822 TGS 822 alcohol gas sensor

Parameters: Alcohol measurement range: 50-5,000ppm Sensitivity (resistance ratio): 0.40 ± 0.1 Circuit voltage: 24V (DC/AC) Heater voltage: 5V±0.2V(AC/DC)

FSR406 Pressure Sensor , 100% New and Original Force Sensitive Resistor

This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Hall sensor A1344EUA-T AH3144E High sensitivity 402 switch 44E
Previous： DHT90 SHT10 Digital temperature and humidity sensor with pin SHT10 Digital Humidity & Temperature Sensor
Next： Industrial-grade MINI I2C interface High-precision Si7021 temperature and humidity sensor
Return
TOP
86-755-83877216
smartbes
smartbes