Search

Raindrop sensor module/rain sensor/large area raindrop module

Products > Sensor Module > Raindrop sensor module/rain sensor/large area raindrop module
    • 1
    • 2
    • 3
    • 4
    • 5

Raindrop sensor module/rain sensor/large area raindrop module

* Distribution bit to adjust sensitivity
* A fixed bolt hole for easy installation
* Power indicator, the output signal LED indicator
* The comparator output, the signal is clean, waveform, driving ability over 15mA
* Wide voltage LM393 comparator
* A large area of rain board, more conducive to detect rain
* Board with positioning holes to facilitate installation
* Raindrops and control panels are separate, easy to wire leads
shared：


* Product use: rain, rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO.
* The sensor USES the high quality FR - 04 double material, large area of 5.5 * 4.0 CM, treatment of nickel plating and surface,
  have fight oxidation, electrical conductivity, and life has more superior performance;
* The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 mA;
* The output format: digital switch output (0 and 1) and analog AO voltage output;
* The working voltage of 3.3 V to 5 V




Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories

The module is a capacitive touch switch module based on touch detection IC (ttp223b). Under normal condition,the module outputs low level and the mode is low power consumption mode; when touching the corresponding position with fingers, the module outputs high level and the mode switches to fast mode; when there is no touch for 12 seconds, the mode switches to low power consumption mode.

TTL Turn RS485 Module 485 to Serial UART Level Mutual Conversion Hardware Automatic Flow Control Module

Product parameters: Operating voltage: compatible with 3.3V and 5.0V Support baud rate: 110-256000bps Operating temperature: -40 Celsius to +85 Celsius Communication signal: compatible with 3.3V and 5.0V

MT3608 2A Max DC-DC Step Up Power Module Booster Power Module

PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply)

Product Name: pam8403 digital power amplifier board Specification and model: gf1002 Power supply range: 5V DC Minimum output: 3W * 2 Appearance size: 29.5 * 20.2 * 15mm (excluding protruding potentiometer rod)

BH1750FVI digital Light Intensity BH1750 Light Module Light Ball DC5V

Keyes BH1750FVI Digital Light Sensor Module is a kind of integrated circuit of digital light intensity sensor for two-wire serial bus interface. Using the light intensity data collected by the module, the brightness of the LCD and keyboard background lamps can be adjusted. Module resolution can detect wide range of light intensity changes.

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board Product Description: Input voltage: AC 100-240V 50/60HZ Output Voltage: DC 24V Output Current: 6-9A Output Power: 150W ( Max 220W ) Location Pore Size: 105.8 x 55.7mm Overall Dimensions: 115 x 65mm Ripple Noise: Less than 150MV Overcurrent protection: Yes Overload Protection: Yes Short circuit protection: Yes

High-Precision Low-ower INMP441 Omnidirectional Microphone Module I2S Interface Supports ESP32

XL 6009 DC to DC Step Up Converter xl6009 step-up power module dc motor

This DC-DC Module is based on IC XL6009E1 which is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip that offers superior performance over the first generation technology LM2577. XL6009 replaces LM2577 module as LM2577 is about to be phased out.

Dual coil fast wireless charger transmitter module PCBA board + 2 coil general qi standard diy board

Product Parameters 1. Input power supply: 5V 2A or 9V 1.67-2a, output: 5V 1A or 9V 1.2A 2. Product weight: 0.035kg 3. Charging power: 5W / 7.5w/10w automatic identification 4. Transmission distance: 2-8mm 5. Executive standard: Qi wireless charging standard 6. Product certification: CE / FCC / RoHS

TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB

Model: TDA7293/TDA7294 Power supply: double AC 15V to 36V (AC needs rectification and filtering) or DC positive and negative 18V to 50V.Recommended double 35V (Note that it is not a dual 35V transformer, it is positive and negative 35V DC. And It is recommended to double 26V/200W toroidal transformer, after rectification voltage is about DC double 35V).

Power Supply for Raspberry Pi 3, Raspberry Pi Pro V1.1 UPS HAT I2C Lithium Battery Expansion Board

This is a power expansion Board especially designed for Raspberry Pi, which enables to use the Raspberry Pi with a moveable power source. It's more convenient to use external 3.7V Lithium battery or 3.7V 18650 Lithium battery;

Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger

The input voltage: 5V2A output : 5V1A The input voltage: 5V4A 9V1.67A(qc3.0) Output : 5V2A 9V1A Charging current: 1000mAh Charging power: up to 10W Wireless conversion efficiency: 73%, boost circuit 90%

New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module

Temperature (Operation): -20°C to 70°C Temperature (Stable Image) : 0°C to 50°C Focus :Fixed Object distance:30CM-∞ Resolution: 800LW/PH (Center) Working power supply : 3.3v(pin15) Operating system: for Raspberry Pi Certifications :FCC and CE Sensor Type: OV5647 (1/4” ) Active Array Size : 2592*1944 Sensitivity: 600mV/Lux-sec F/No: 2.35 EFL: 1.55 mm BFL(Optical): 3.1mm FOV: 160° TV Distortion :<14.5% Relative Illumination (Sensor) : 70% IR Filter : 650±10nm

SIM900A module, development board, GSM/GPRS/STM32 \ super TC35i wireless data transmission module

Product Description: ardu 51 STM32 AVR MCU compatible Prototype expand The dual frequency 900/ 1800 MHz, GPRS multi-slot class 10/8,GPRS mobile station class B Power supply range: voltage is 4.6-5.2v; current is 1A or more(the current is very important). Low power consume: 1.5mA (sleep mode) Operating temperature range: -40 degrees C to +85 C Communication interface: The TTL level serial interface compatible 2.85 3.3 5v MCU Size:49*50mm
Previous： 9 INCH 1024*600 LCD TOUCH SCREEN + VGA DRIVER BOARD FOR RASPBERRY PI
Next： WIFI R3 ATMEGA2560 + ESP8266 (32MB) USB-TTL CH340G UNO development board
Return
TOP
86-755-83877216
smartbes
smartbes