Search

Smart Electronics Industrial grade RS232 RS485 CAN to TTL communication module Serial port module CAN module

Products > WIFI/GPS/GMS Module > Smart Electronics Industrial grade RS232 RS485 CAN to TTL communication module Serial port module CAN module
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6

Smart Electronics Industrial grade RS232 RS485 CAN to TTL communication module Serial port module CAN module

Industrial grade RS232 RS485 CAN to TTL communication module Serial port module CAN module
shared：
Industrial Grade RS232 RS485 CAN to TTL Communication Module Serial Module CAN Module

SKU 1

RS232 to TTL communication module

SKU 2

RS485 to TTL communication module

SKU 3

CAN to TTL communication module


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000

●Support 100Ω to 1kΩ (at 0°C) platinum resistance RTD (PT100 to PT1000) ●Conversion time: 21ms (maximum) ●15-bit ADC resolution; nominal temperature resolution is 0.03125°C (non-linear change with RTD) ● Under the whole working conditions, the total accuracy is maintained at 0.5°C (0.05% full range) ● SPI compatible interface, compatible with 2-wire, 3-wire and 4-wire sensor connection

Smart Electronics 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board For 14.8V 16.8V Lipo Cell Module

4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board For 14.8V 16.8V Lipo Cell Module 4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery) Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery) Product Size: 45 * 55 * 3.4mm (Standard Edition / Enhanced), 46 * 60 * 3.4mm (balanced version) Product weight: 9.3g (standard / enhanced version), 10.3g (balanced version) Charging voltage: 16.8V - 18.1V

Universal Wireless Charging PCBA Coil Charging Pcb Circuit Board Qi Wireless charger receiver module

LCD1602 yellow-green screen 1602A lcd display blue

69.5*21.8*17.8 weighs about 30 grams

Thermoelectric Peltier Refrigeration Cooling System Kit Cooler for DIY TEC-12706 mini air conditioner

Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor ​Technologies and electronic assembly techniques. Here is the Kit you can made cooling system for yourself easy and fun Enjoy the DIY

XH-M542 Mono Digital Power Amplifier Board TPA3116D2 High Power Amplifier 100W

Product parameters: Supply voltage: DC12-26V Output power: 100W Signal to noise ratio: 100db Number of channels: mono Product size: 79*54*16(mm)

Smart Electronics JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module

JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module Model: JDY-34 Antenna type: PCB board mounted antenna Working frequency band: 2.4G Transmission power: 4dB (peak) Communication interface: UART Working voltage: 2.1V-3.6V Working temperature: -40 ° C-80 ° C Receiving sensitivity: -91dbm Transmission distance: 40 meters Module size: 27 * 12.88 * 1.8mm Bluetooth version: BLE4.2+SSP dual-mode (backward compatible with 4.2, 4.0, 3.0, 2.1, 2.0) Transmission rate: BLE14 K Bytes/s SPP 40K byte/s (Android or computer Bluetooth tested 40K byte/s speed) Command parameter saving: parameter configuration and power-off data are saved SIM welding temperature:<260 ℃ Working current: 15mA

TPA3118 Mono Digital Amplifier Module Board High Sound Quality 60W

DC-DC Step Up Converter Booster Power Supply Module Boost Step-up Board MAX output 28V 2A MT3608

Long Range Rfid 134.2 KHZ Reader module RDM660 Writer Transceivers

Smart Electronics CC1101 Intelligent Industrial Wireless RF Communication Module SPI Transceiver Module 868MHz

CC1101 Intelligent Industrial Wireless RF Communication Module SPI Transceiver Module 868MHz Features: 1.Low power UHF wireless transceivers @ 868MHZ 2.Support FSK , GFSK , ASK / OOK and MSK 3.Configurable data rate 1.2K to 500kps 4.Two 64 bytes FIFO for TX & RX buffer 5.Packet handling including address recognition 6.Support Wake-on-radio 7.Support Clear Channel Assessment（Listen-before-talk ) 8.RSSI Output &Link Quality Indictor 9.SPI Interface 10.Wide Operating Voltage 1.8-3.6V

Smart Electronics JDY-08 blue tooth 4.0BLE low-power CC2541 master-slave integrated support airsync iBeacon module

JDY-08 blue tooth 4.0 BLE low-power CC2541 master-slave integrated support airsync iBeacon module

NRF52832 Low Power Ble 4.2 Module 2.4G Wireless Module BLE4.0 4.2 Module

GY-906 MLX90614ESF infrared temperature sensor module

Module model: GY-906 Using IC: MLX90614 Power supply: 3-5v (internal low dropout voltage regulation) Communication method: standard IIC communication protocol Size: 11.5*16.5mm

DC 5V & DC12V ESP8266 WIFI 4-Channel Relay Module IoT Wireless Transmitter

ESP8266 WIFI 4-Channel Relay Module is 4 channel WIFI relay module carried a ESP8266 WIFI module and mature 8 bit MCU, with Professional switching power supply circuit.It could control the relay by Android phone APP within the local area network (LAN).It is easy to set .

DIY kit 3 Channel 2 * 18W 30W High Power Fever Super Bass AC TDA2030A Dual 12V Power Amplifier Board 2.1

Smart Electronics JDY08 Ble 4.0 BLE low-power CC2541 master-slave integrated airsync iBeacon Ble module

JDY08 Ble 4.0 BLE low-power CC2541 master-slave integrated airsync iBeacon Ble module Feature The JDY-08 transparent transmission module is based on the Bluetooth 4.0 protocol standard, with a working frequency range of 2.4GHz and a modulation method of GFSK. The maximum transmission power is 0dB and the maximum transmission distance is 80 meters. It adopts the TCC2541 chip design and supports users to modify device names, service UUID, transmission power, pairing passwords and other instructions through AT commands, making it convenient, fast, and flexible to use.

New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module

Temperature (Operation): -20°C to 70°C Temperature (Stable Image) : 0°C to 50°C Focus :Fixed Object distance:30CM-∞ Resolution: 800LW/PH (Center) Working power supply : 3.3v(pin15) Operating system: for Raspberry Pi Certifications :FCC and CE Sensor Type: OV5647 (1/4” ) Active Array Size : 2592*1944 Sensitivity: 600mV/Lux-sec F/No: 2.35 EFL: 1.55 mm BFL(Optical): 3.1mm FOV: 160° TV Distortion :<14.5% Relative Illumination (Sensor) : 70% IR Filter : 650±10nm

GY-BME/BMP280 3.3V-5V temperature and humidity/atmospheric pressure sensor module

1000W ZVS Carbon Steel Flyback Driver Low Voltage Stable Induction Heating Board Module Plate

100% brand new and high quality! This section of induction heating using low-voltage DC power supply 12-48V. Maximum current 20A, maximum power 1000W. Can be used for DIY players to heat treatment of small parts such as quenching, annealing, etc. Can directly heat iron, carbon steel, graphite, titanium alloy and other materials. Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.
Previous： Smart Electronics New Original SIMCOM SIM7000A SIM7000G SIM7000E, NB/CAT-M/GSM Module
Next： Smart Electronics 3G module gsm gprs sim5320 simcom sim5320e module development board
Return
TOP
86-755-83877216
smartbes
smartbes