Search

Smart Electronics Raspberry pi zero camera module OV5647 500W RPI zero v1.3 camera

Products > Raspberry Pi Series > Smart Electronics Raspberry pi zero camera module OV5647 500W RPI zero v1.3 camera
    • 1

Smart Electronics Raspberry pi zero camera module OV5647 500W RPI zero v1.3 camera

Raspberry pi zero camera module OV5647 500W RPI zero v1.3 camera

5 million pixels
Light-sensitive chips OV5647
Camera parameters:
The CCD size: 1/4 inch
Viewing Angle (Diagonal) : 72.4 degrees
The best pixel sensor: 1080 p
Static image resolution is 2592 x 1944
Support 1080 p30, 1080 p60 and 720 x480p60/90 video footage
Overall size: 60 mm x 11.5 mm x 5 mm
shared：


5 million pixels
Light-sensitive chips OV5647
Camera parameters:
The CCD size: 1/4 inch
Viewing Angle (Diagonal) : 72.4 degrees
The best pixel sensor: 1080 p
Static image resolution is 2592 x 1944
Support 1080 p30, 1080 p60 and 720 x480p60/90 video footage
Overall size: 60 mm x 11.5 mm x 5 mm


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics 100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V

100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V Operating voltage: Dual DC 10 - 45V recommended Dual DC 35V Rated output power :100W(4 Ohm ± 35V) Maximum output power : 150W (4 Ohm ± 45V) enormous heat, is not recommended PCB size :30 x 50 x 35mm Pitch : 5.08mm Hole distance between two power tube : 47mm

SIM900A module, development board, GSM/GPRS/STM32 \ super TC35i wireless data transmission module

Product Description: ardu 51 STM32 AVR MCU compatible Prototype expand The dual frequency 900/ 1800 MHz, GPRS multi-slot class 10/8,GPRS mobile station class B Power supply range: voltage is 4.6-5.2v; current is 1A or more(the current is very important). Low power consume: 1.5mA (sleep mode) Operating temperature range: -40 degrees C to +85 C Communication interface: The TTL level serial interface compatible 2.85 3.3 5v MCU Size:49*50mm

Smart Electronics 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module Use precautions: 1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and ​negative do not pick wrong 2. Recommended power supply ±65V 3. Recommended 4-8Ω / 10-18inch speaker 4. Carefully check before electricity, ensure the wiring is correct.

Smart Electronics Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board

Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board This plate with switching function, SW short, will turn off the power amplifier Working Mode: Class D (PWM modulation type) Chip Type: PAM8610 Power Range: DC 6V-15V (self-protection) Recommended Voltage: DC 12V(2A) Output Power: 10Wx2(8Ω) 15Wx2(4Ω) Frequency Response: 20HZ-15KHZ Static Current: 20MA (DC12V) SNR: 90% Recommended Speakers: 10-100W Input Impedance: 15K Output Impedance: 4-8Ω Harmonic Distortion: <0.1% Size: Approx. 3cm x 2.5cm/ 1.19" x 0.98"

Smart Electronics PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply)

PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply) Product Name: pam8403 digital power amplifier board Specification and model: gf1002 Power supply range: 5V DC Minimum output: 3W * 2 Appearance size: 29.5 * 20.2 * 15mm (excluding protruding potentiometer rod)

Smart Electronics 22.5W with QC4+PD3.0 Power Bank 5-port bidirectional fast charging mobile power module circuit board

22.5W with QC4+PD3.0 Power Bank 5-port bidirectional fast charging mobile power module circuit board

Smart Electronics TTL Turn RS485 Module 485 to Serial UART Level Mutual Conversion Hardware Automatic Flow Control Module

TTL Turn RS485 Module 485 to Serial UART Level Mutual Conversion Hardware Automatic Flow Control Module Product parameters: Operating voltage: compatible with 3.3V and 5.0V Support baud rate: 110-256000bps Operating temperature: -40 Celsius to +85 Celsius Communication signal: compatible with 3.3V and 5.0V

Smart Electronics JDY-08 blue tooth 4.0BLE low-power CC2541 master-slave integrated support airsync iBeacon module

JDY-08 blue tooth 4.0 BLE low-power CC2541 master-slave integrated support airsync iBeacon module

Smart Electronics HC-SR505 Mini sensor di movimento a infrarossi PIR sensor preciso a infrarossi SR505

HC-SR505 Mini sensor di movimento a infrarossi PIR sensor preciso a infrarossi SR505

Smart Electronics JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module

JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module Model: JDY-23 Working frequency band: 2.4G Transmission power: 4dB (maximum) Communication interface: UART Working voltage: 1.8-3.6V Working temperature: -40 ℃ -80 ℃ Antenna: Built in PCB antenna Receiving sensitivity: -97dbm Transmission distance: 60 meters Master Slave Support: Slave Module size: 19.6 * 14.94 * 18mm (length, width, height) Bluetooth version: BLE5.0 (also includes BLE4.0 and BLE4.2) Wake up current: 800uA (with broadcast) Shallow sleep current:<50uA (with broadcast) Command parameters: Save parameter configuration, power-off data saved SMT welding temperature:<260 ℃ RF TX/RX peak current: 5mA

Smart Electronics TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection

TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection

Smart Electronics 3.5-inch TFT LCD display screen module serial port SPI driver ILI9488 with capacitive touch RGB 320 * 480

3.5-inch TFT LCD display screen module serial port SPI driver ILI9488 with capacitive touch RGB320 * 480

Smart Electronics ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

Smart Electronics 150W Mono TPA3116D2 Digital Amplifier Board Subwoofer Trolley Box Amplifier Module XH-M571

150W Mono TPA3116D2 Digital Amplifier Board Subwoofer Trolley Box Amplifier Module XH-M571

Smart Electronics HD SPI 0.96 inch 1.3 inch 1.44 inch 1.8" tft spi st7735 80 x 160 color display OLED LCD screen st7735

HD SPI 0.96 inch 1.3 inch 1.44 inch 1.8" tft spi st7735 80 x 160 color display OLED LCD screen st7735

Smart Electronics MAX7219 led dot matrix module 4 in 1 display module single chip microcomputer control drive module with 5p wire

MAX7219 led dot matrix module 4 in 1 display module single chip microcomputer control drive module with 5p wire MAX7219 is an integrated serial input/output common-cathode display driver, which connects a microprocessor and an 8-digit 7-segment digital LED display, and can also be connected to a bar graph display or 64 independent LEDs. It includes an on-chip B-type BCD encoder, multiple scan loops, segment word drivers, and an 8*8 static RAM to store each data. Only one external register is used to set the segment current of each LED.

Smart Electronics HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module

HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module Product model: HC-08 Working frequency band: 2.4G Communication interface: UART3.3VTL level Working voltage: 3.0-3.6V RSSI support: not supported Communication level: 3.3V Transmission power: 4dBm Reference distance: 80 meters Air speed: 2Mbps Antenna interface: built-in PCB antenna Communication current: 0.4uA Receiving sensitivity: 85dbm@2Mbps Working humidity: 10%~90% Storage temperature: 40 ℃ -+80 ℃ Working temperature: -25 ℃ -75 ℃

Smart Electronics ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module

ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleepcurrent and a minimum of 6mA. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
Previous： Reed Switch 3 pin Magnetic Switches 2.5*14mm Normally Open Closed 2.5X14MM NO NC Conversion for Sensors
Next： Smart Electronics Teensy++ 2.0 Compatible USB AVR Development Board For Ardu ISP AT90USB1286
Return
TOP
86-755-83877216
smartbes
smartbes