Search

Smart Electronics MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element

Products > Sensor > Smart Electronics MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element
    • 1
    • 2

Smart Electronics MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element

MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element

Product model: MQ135
Product Type: Semiconductor gas sensor
Standard package: Bakelite (Black Bakelite)
Detection gas: ammonia, sulfide, benzene vapor
Detection concentration: 10-1000ppm (ammonia, toluene, hydrogen)
Standard circuit conditions
Loop voltage Vc: ≤24VDC
Heating voltage VH: 5.0V±0.2 V ACORDC
Load resistance RL: adjustable
shared：

MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas

sensitive element
Specification
Product model: MQ135 Product Type: Semiconductor gas sensor Standard package: Bakelite (Black Bakelite) Detection gas: ammonia, sulfide, benzene vapor Detection concentration: 10-1000ppm (ammonia, toluene, hydrogen) Standard circuit conditions Loop voltage Vc: ≤24VDC Heating voltage VH: 5.0V±0.2 V ACORDC Load resistance RL: adjustable

Gas sensor characteristics under standard test conditions:

Heating resistance RH: 31ohm±3ohm (room temperature) Heating power consumption PH: ≤900mW Sensitive body surface resistance Rs: 2Kohm-20Kohm (in100ppm NH3) Sensitivity S: Rs(in air)/Rs(100p0mNH3)≥5 Concentration slope α: ≤0.6(R100pm/R50ppmNH3)
Standard test conditions:

Temperature and humidity: prefix=st120℃±2℃; 65%±5%RH Standard test circuit: vc: 5.0V±0.1V; VH: 50V±0.1V Warm-up time: no less than 48 hours

Product features

1. It has good sensitivity to harmful gases in a wide range of concentration. 2. It has high
sensitivity to ammonia, sulfide and benzene series 3. Long life, low cost 4. Simple driving circuit is enough

Application field

1. Household air pollution alarm 2. Industrial air pollution alarm 3. Portable air pollution detector
Send Message to us *  Part Number | Package Type | Quantity are needed if you send messages to us *  Send all models you are looking for to us,we can quote all of them. *  Welcome to attach Purchase / Factory Bom


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

DHT90 SHT10 Digital temperature and humidity sensor with pin SHT10 Digital Humidity & Temperature Sensor

MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000

●Support 100Ω to 1kΩ (at 0°C) platinum resistance RTD (PT100 to PT1000) ●Conversion time: 21ms (maximum) ●15-bit ADC resolution; nominal temperature resolution is 0.03125°C (non-linear change with RTD) ● Under the whole working conditions, the total accuracy is maintained at 0.5°C (0.05% full range) ● SPI compatible interface, compatible with 2-wire, 3-wire and 4-wire sensor connection

AM2305 Digital temperature and humidity sensor

1) The relative humidity and temperature, calibration of all digital output 2) Excellent long-term stability 3) Without additional components 4) Long distance signal transmission 5) ultra low power 6) 4 pin installation 7) Completely interchangeable

Smart Electronics Hall effect sensor ss49e 49e hall element oh49e

Hall effect sensor ss49e 49e hall element oh49e The 49E is a Hall-effect integrated circuit. The output voltage changes with the change of the magnetic flux density, and it can detect the slight change of the magnetic field. It can be used to measure the motion of objects, distance, position sensor, etc. It is alsosuitable for use in harsh environments or heavily polluted conditions.

Smart Electronics RTD Pt100 Temperature Sensor Probe Length 5cm 1/2" NPT Thread w/ Detachable Connector

RTD Pt100 Temperature Sensor Probe Length 5cm 1/2" NPT Thread w/ Detachable Connector Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item

D2027 piezoresistive flexible film pressure sensor foot pressure force measurement customization

Terminal type Male terminal Female terminal Pressure range 500g 2kg 5kg 10kg 20kg 40kg 60kg 100kg

Thin film pressure sensor-single point circular diameter 4 mm flexible resistive FSR

IMS054-C04A (IMS-C04A) is a member of the single-node sensor family. They are all very reliable piezoresistive sensors, using A structure with double-sided silver electrodes. When the pressure (pressure) applied to the effective area of the sensor increases, the output resistance of the sensor decreases, and the single-point sensor can be measured with a multimeter or the customer's own circuit

Force Sensor RP-C18.3-ST Flexible Thin Film Pressure Sensor Intelligent 20g-6kg

The flexible sensor has the characteristics of flexible ultra-thin, ultra-low power consumption and extreme speed response, etc. Small size, this flexible pressure sensor is based on new nanometer pressure-sensitive materials ​supplemented by ultra-thin film substrate. This pressure sensor has the characteristic of high stability, high consistency. Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.

Smart Electronics PT100 temperature sensor thermal resistance thermocouple WZP-035 probe waterproof and corrosion resistant high temperature

PT100 temperature sensor thermal resistance thermocouple WZP-035 probe waterproof and corrosion resistant high temperature Non-standard customization High temperature thermal resistance 450 degree specification price as above NTC thermal 4*30*2 meters K type PTFE low temperature 200 degrees 2*30mm*1m A grade three core

Smart Electronics NTC Probe for immersion sensor custom steel tube 50mm

NTC Probe for immersion sensor custom steel tube 50mm 1.sensor well for immersion sensor , custom steel tubes 50mm G1/2 legth 56mm 2.sensor well for immersion sensor custom steel tubes 80mm G1/2 legth 86mm

Smart Electronics MQ-9 carbon monoxide Combustible gas sensor alarm module

MQ-9 carbon monoxide Combustible gas sensor alarm module Feature: Size: 32mm * 22mm * 27mm Main chip: LM393, MQ-9 gas sensors Working voltage: DC 5 V Characteristics: 1, having a signal output instruction. 2, dual signal output (analog output, and TTL level output) 3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller) 4, 0 - 5V analog output voltage, the higher the concentration the higher the voltage. 5, for CO, gas, liquefied petroleum gas with high sensitivity and good selectivity. 6, has a long life and reliable stability 7, rapid response and recovery characteristics Application: MQ-9 sensor main family, environmental detection of carbon monoxide gas for CO, gas, liquefied petroleum gas field testing;

MLX90614ESF-BAA non-contact infrared temperature sensor high precision digital temperature sensor original

Model: MLX90614ESF-BAA Material: metal Origin: Mainland China Output model category: Digital sensor Applicable scene: Car air conditioner, indoor heating, medical equipment temperature measurement Sensor category: infrared sensor Size: 31x31x18mm Working current: 0.01A Working voltage: 3V

Industrial-grade MINI I2C interface High-precision Si7021 temperature and humidity sensor

Working voltage: 1.9-3.6V (3.3V recommended) Standby current: 60nA Temperature range: -40-85°C (recommended -10-60°C) Temperature accuracy: ±0.4℃ (-10-85℃) Humidity range: 0-RH (20%-80%RH recommended) Humidity accuracy: ±3%RH (0-80%RH) Temperature conversion time: 7ms Humidity conversion time: 17ms (temperature conversion will be performed automatically when humidity conversion is performed) Interface type: I2C 2.54mm pitch pad Module size: 8.5X10mm

SHTC1 humidity and temperature sensor temperature sensor for agricultural

Datasheet SHTC1 Humidity and Temperature Sensor IC Best performance-to-price ratio Fully calibrated and reflow solderable Ultra-low power consumption Power-up and measurement within 1 ms 1.8 V supply voltage Ultra-small DFN package : 2 x 2 x0 . 75 mm³ Typical accuracy : ± 3% RH and + 0.3 ºC

Smart Electronics High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

Smart Electronics DHT11 module digital temperature and humidity sensor dht-11 electronic building block

DHT11 module digital temperature and humidity sensor dht-11 electronic building block (37 in one) Product parameters: 1. Power supply voltage: 5V 2. Temperature error: 0-50℃ 3. Humidity range: 20-90%RH

Smart Electronics WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor

WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor

M12 proximity switch sensor LJ12A3-4-Z/BX/BY/AX/AY/EX/DX/EZ/DZ normally open 24V

Current specification: 300mA Rated working voltage: DC: 6-36V Distance measurement: 4mm±10% Output mode: NPN NO (normally open) Level signal: low level Installation method: non-embedded Thread diameter: M12X1 Shell material: brass nickel plated Wire length: 1.2 meters

Thin Film Pressure Sensor DF9-40 High Precise Force Sensing Resistor Resistance-type Flexible Pressure Sensor

This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate. Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure. It has pressure sensitive function as well as water-resistant function. When sensor detects outside pressure, the resistance of sensor will change. Pressure signal can be converted into a corresponding electrical signal output using simple circuit.
Previous： Smart Electronics Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136
Next： Smart Electronics MQ6 MQ-6 combustible gas/liquefied petroleum gas sensor probe dip6
Return
TOP
86-755-83877216
smartbes
smartbes