Search

Smart Electronics Power Supply for Raspberry Pi 3, Raspberry Pi Pro V1.1 UPS HAT I2C Lithium Battery Expansion Board

Products > Raspberry Pi Series > Smart Electronics Power Supply for Raspberry Pi 3, Raspberry Pi Pro V1.1 UPS HAT I2C Lithium Battery Expansion Board
    • 1
    • 2
    • 3
    • 4

Smart Electronics Power Supply for Raspberry Pi 3, Raspberry Pi Pro V1.1 UPS HAT I2C Lithium Battery Expansion Board

Power Supply for Raspberry Pi 3, Raspberry Pi Pro V1.1 UPS HAT I2C Lithium Battery Expansion Board

This is a power expansion Board especially designed for Raspberry Pi, which enables to
use the Raspberry Pi with a moveable power source. It's more convenient to use external
3.7V Lithium battery or 3.7V 18650 Lithium battery;

shared：


Description:

This is a power expansion Board especially designed for Raspberry Pi, which enables to
use the Raspberry Pi with a moveable power source. It's more convenient to use external
3.7V Lithium battery or 3.7V 18650 Lithium battery;


Specification:

  • Supports I2C Output with Capacity & Voltage Reading Function;

  • Two power supply modes: GPIO power output and USB power out;

  • Support Raspberry pi or Android & Apple Phone or Pad or other electronic device charging;

  • Supports charging while discharging,(it's stable output, the maximum output current can up

    to 1.8A while charging, but the chip heat will become larger.

    Maybe you can place a external heatsilk on clip.)

  • With 4 LED power indicator;

  • Standard dimension of Raspberry Pi HAT;

  • Removable battery, The external lithium battery requirements: 3.7V lithium battery;

  • Built-in power path management, perfect support charging While discharging.

  • Intelligent 3-stage charging (trickle, constant current, constant voltage), it can effectively extend the battery life.

  • Maximum discharge current: 2A, Maximum charge current: 1.8A;

  • Output protection: overcurrent, short circuit, undervoltage protection;

  • Input protection: overvoltage, overcharge, undervoltage protection



Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

The promotional HC-SR04 ultrasonic module Ultrasonic ranging module

The main technical parameters: 1, using voltage: DC5V 2: static current: less than 2 ma 3, high level output: 5 v 4, level output: 0 v 5, induction Angle: no more than 15 degrees 6, detection range: 2 cm - 450 cm 7,high precision: up to 0.3 cm

Smart Electronics Touch Button Module Capacitor Switch Sensor TTP223

Touch Button Module Capacitor Switch Sensor TTP223

Smart Electronics Raspberry pi zero camera module OV5647 500W RPI zero v1.3 camera

Raspberry pi zero camera module OV5647 500W RPI zero v1.3 camera 5 million pixels Light-sensitive chips OV5647 Camera parameters: The CCD size: 1/4 inch Viewing Angle (Diagonal) : 72.4 degrees The best pixel sensor: 1080 p Static image resolution is 2592 x 1944 Support 1080 p30, 1080 p60 and 720 x480p60/90 video footage Overall size: 60 mm x 11.5 mm x 5 mm

Smart Electronics 0.49 inch 0.5 inch OLED 64x32 ssd1315 0.49 OLED display screen highlighted OLED

0.49 inch 0.5 inch OLED 64x32 ssd1315 0.49 OLED display screen highlighted OLED

Smart Electronics CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

Smart Electronics GSM module, SIM808 Module with GPS antenna GSM GPRS GPS development board

GSM module, SIM808 Module with GPS antenna GSM GPRS GPS development board This module is 5-12V power supply, when the power supply is less than 9V, 2A DC is required. The other power supply port is 3.5-4.2V, suitable for lithium battery power supply. The computer can debug USB-TTL. Suitable for portable. Two sets of antenna SMA ports, GPS and GSM antennas are provided.

Smart Electronics HC-SR501 Adjust IR Pyroelectric Infrared PIR Motion Sensor Detector Module

HC-SR501 Adjust IR Pyroelectric Infrared PIR Motion Sensor Detector Module Automatic induction: When someone enters its induction range, enter the high level, people leave the sensor range is automatically delayed off high. Output low. 2. photosensitive control (optional): the module reserved for location, can be set to photosensitive control, strong light during the day or not induction. Photosensitive control is optional, the factory did not install photosensitive resistor. If necessary, please buy a separate photosensitive resistor to install.

74HC595 driver 8-digit digital tube display module

1. Two 595 digital tubes are used to drive the digital tube, which needs 3 IO ports of single chip microcomputer, and it is displayed according to the principle of dynamic scanning of digital tube; 2. wide working voltage 3.3V to 5V; 3. PCB size: 71mm * 22mm 4. digital tube model: 0.364 bits

Smart Electronics High power three channel amplifier module TDA2050+TDA2030 2.1 subwoofer amplifier circuit board

High power three channel amplifier module TDA2050+TDA2030 2.1 subwoofer amplifier circuit board

Smart Electronics DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module

DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module product description: Power amplifier chip: TPA3118 Amplifier power: 1*60W Supply voltage: 8~24VDC Speaker impedance: 4-8Ω Size: 46*35*1.6mm (length, width and thickness) Total height of the board: 12mm

Smart Electronics PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply)

PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply) Product Name: pam8403 digital power amplifier board Specification and model: gf1002 Power supply range: 5V DC Minimum output: 3W * 2 Appearance size: 29.5 * 20.2 * 15mm (excluding protruding potentiometer rod)

Smart Electronics New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module

New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module Temperature (Operation): -20°C to 70°C Temperature (Stable Image) : 0°C to 50°C Focus :Fixed Object distance:30CM-∞ Resolution: 800LW/PH (Center) Working power supply : 3.3v(pin15) Operating system: for Raspberry Pi Certifications :FCC and CE Sensor Type: OV5647 (1/4” ) Active Array Size : 2592*1944 Sensitivity: 600mV/Lux-sec F/No: 2.35 EFL: 1.55 mm BFL(Optical): 3.1mm FOV: 160° TV Distortion :<14.5% Relative Illumination (Sensor) : 70% IR Filter : 650±10nm

Smart Electronics 300W 20A DC-DC Buck Converter Step Down Module Constant Current LED Driver Power Step Down Voltage Module

300W 20A DC-DC Buck Converter Step Down Module Constant Current LED Driver Power Step Down Voltage Module

ACS712ELC-05B 5A range ACS712 module AC current sensor module

1. Current sensor chip: ACS712ELC-05B; 2. Pin 5V power supply, onboard power indicator; 3. The module can measure plus or minus 5A current, corresponding to the analog output 185mV/A; 4. When no detection current passes, the output voltage is VCC/2; 5. PCB board size: 31(mm)x13(mm);

SIM900A module, development board, GSM/GPRS/STM32 \ super TC35i wireless data transmission module

Product Description: ardu 51 STM32 AVR MCU compatible Prototype expand The dual frequency 900/ 1800 MHz, GPRS multi-slot class 10/8,GPRS mobile station class B Power supply range: voltage is 4.6-5.2v; current is 1A or more(the current is very important). Low power consume: 1.5mA (sleep mode) Operating temperature range: -40 degrees C to +85 C Communication interface: The TTL level serial interface compatible 2.85 3.3 5v MCU Size:49*50mm

Smart Electronics XL4016 DC/CC Adjustable 0.2- 9A 300w Step Down Buck Converter 5-40V To 1.2-35V Power Supply Module LED Driver

XL4016 DC/CC Adjustable 0.2- 9A 300w Step Down Buck Converter 5-40V To 1.2-35V Power Supply Module LED Driver Applications: 1. High-power LED driver. 2. Lithium battery(or lead accumulator) charge. 3. Vehicle-mounted power supply. 4. Low voltage system power supply. 5. 6V, 12V, 14V, 24V battery charge. 6. On-board laptop power supply. 7. regulated power supply. 8.Low voltage power supply system.

Smart Electronics IR Infrared Proximity Sensor Obstacle Avoidance module for Arduino Raspberry Pi DIY Smart Car 3PIN Robot Reflective Photoelec

IR Infrared Proximity Sensor Obstacle Avoidance module for Arduino Raspberry Pi DIY Smart Car 3PIN Robot Reflective Photoelec

Smart Electronics Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger

Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger The input voltage: 5V2A output : 5V1A The input voltage: 5V4A 9V1.67A(qc3.0) Output : 5V2A 9V1A Charging current: 1000mAh Charging power: up to 10W Wireless conversion efficiency: 73%, boost circuit 90%

Smart Electronics Cell Pack Module Original 3S 25A Li-ion 18650 BMS PCM Battery Protection Board With Balance For li-ion Lipo Battery

Cell Pack Module Original 3S 25A Li-ion 18650 BMS PCM Battery Protection Board With Balance For li-ion Lipo Battery
Previous： Smart Electronics RTD Pt100 Temperature Sensor platinum resistance thermistor high-precision probe G1/2 threaded with detachable connector
Next： LJ12A3-4-Z/BY Inductive Proximity Sensor Switch 4mm Detection PNP DC6-36V NO Normally Open
Return
TOP
86-755-83877216
smartbes
smartbes