Search

Infrared temperature measurement sensor MLX90614ESF-BAA for infrared forehead thermometer

Products > Sensor > Infrared temperature measurement sensor MLX90614ESF-BAA for infrared forehead thermometer
    • 1
    • 2
    • 3

Infrared temperature measurement sensor MLX90614ESF-BAA for infrared forehead thermometer

Product category: temperature sensor mounted on board
Output type: Digital
Configuration: Remote
Accuracy: +/- 0.5 C
Power supply voltage-minimum: 2.6 V
Power supply voltage-maximum: 3.6 V
Interface type: 2-Wire
Resolution: 10 bit
Minimum operating temperature:-40° C
Maximum operating temperature: +85 °C
Installation style: Through Hole
Package / Box: TO-39-4
Package: Tube
Temperature threshold: +380 °C
Working power supply current: 1.3 mA
Unit weight: 2 g
shared：


Feature
Product category: temperature sensor mounted on board
Output type: Digital Configuration: Remote Accuracy: +/- 0.5 C Power supply voltage-minimum: 2.6 V Power supply voltage-maximum: 3.6 V Interface type: 2-Wire Resolution: 10 bit Minimum operating temperature:-40 C Maximum operating temperature: +85 C Installation style: Through Hole Package / Box: TO-39-4 Package: Tube Temperature threshold: +380 C Working power supply current: 1.3 mA Unit weight: 2 g

Model number:
mlx90614esf-baa-000-tu
mlx90614esf-baa-000-sp




Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

MQ5 module, liquefied gas, gas detection sensor module

The gas sensitive material used in the MQ-5 gas sensor is tin dioxide (SnO2), which has low conductivity in clean air. When there is combustible gas in the environment where the sensor is located, the conductivity of the sensor increases with the increase of the combustible gas concentration in the air.

Thin film pressure sensor, Square 16 nodes side length 20 mm flexible resistive motion sensor

The IMM0092 of Idong Film Electronics is a member of the single-node sensor family. Although IMM092 has 16 nodes, because IMM00092 has 32 lines of output, each node has 2 lines of output, and the 16 nodes are independent of each other. They are very reliable piezoresistive sensors. When the pressure (pressure) applied to the effective area of the sensor increases, the output resistance of the sensor decreases. Single-point sensors can be measured using a multimeter or customer's own circuit.

Smart Electronics HAL506 UA-2 TO92-UA Automotive Hall Sensor

HAL506 UA-2 TO92-UA Automotive Hall Sensor Model: HAL506 UA-2 Description: TO92-UA Packaging: CutTape(CT) AlternatePackaging Series: HAL®5xy Part status: LastTimeBuy Technology: Hall Effect Voltage-power supply: 3.8V~24V Current-power supply (maximum): 5.2mA Current-output (maximum): 20mA Output type: OpenDrain Feature: TemperatureCompensated Working temperature: -40°C~140°C (TJ) Installation type: ThroughHole Supplier device package: TO-92UA-2 Package/Shell: TO-226-3TO-92-3ShortBody

Smart Electronics T106 waterproof temperature probe thermal resistance sensor thermistor 10K B3435

T106 waterproof temperature probe thermal resistance sensor thermistor 10K B3435 Product name: Waterproof probe sensor Product model: T106 Resistance type: NTC10K thermistor Detection accuracy: ±1℃ Plug type: XH2.54-2 pin plug (2P) Measuring temperature: -50°C~110°C Wire material: stranded copper wire tinned sheath Product length: 0.5m/1m/2m/3m/ customized

Smart Electronics MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element

MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element Product model: MQ135 Product Type: Semiconductor gas sensor Standard package: Bakelite (Black Bakelite) Detection gas: ammonia, sulfide, benzene vapor Detection concentration: 10-1000ppm (ammonia, toluene, hydrogen) Standard circuit conditions Loop voltage Vc: ≤24VDC Heating voltage VH: 5.0V±0.2 V ACORDC Load resistance RL: adjustable

Thermistor Temperature Sensor Shell 5*25mm Nickel-plated Copper Shell PT100 Shell

4*11 4*20 5*20 5*22.5 5*25 6*30 4.2 annular hole M6 stainless steel thread M8 stainless steel thread M6 split nickel-plated copper shell 5*50Stainless steel shell annealed shell groove 6*50Stainless steel shell annealed shell groove

M12 proximity switch sensor LJ12A3-4-Z/BX/BY/AX/AY/EX/DX/EZ/DZ normally open 24V

Current specification: 300mA Rated working voltage: DC: 6-36V Distance measurement: 4mm±10% Output mode: NPN NO (normally open) Level signal: low level Installation method: non-embedded Thread diameter: M12X1 Shell material: brass nickel plated Wire length: 1.2 meters

Smart Electronics High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

Industrial-grade MINI I2C interface High-precision Si7021 temperature and humidity sensor

Working voltage: 1.9-3.6V (3.3V recommended) Standby current: 60nA Temperature range: -40-85°C (recommended -10-60°C) Temperature accuracy: ±0.4℃ (-10-85℃) Humidity range: 0-RH (20%-80%RH recommended) Humidity accuracy: ±3%RH (0-80%RH) Temperature conversion time: 7ms Humidity conversion time: 17ms (temperature conversion will be performed automatically when humidity conversion is performed) Interface type: I2C 2.54mm pitch pad Module size: 8.5X10mm

MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor

MH-Z19B 0-5000PPM Mh-z19c 400-5000ppm C is an upgrade of B Carbon dioxide gold shell (non mh-z19) 400-5000ppm Carbon dioxide white shell (non mh-z19) 400-5000ppm

Customized 304 capillary tube/stainless steel seamless pipe, hollow round tube

Smart Electronics SS495A SS495A1 hall sensor Magnetic sensors Hall-Effect

SS495A SS495A1 hall sensor Magnetic sensors Hall-Effect

MQ8 MQ-8 hydrogen sensor detection alarm module,Gas sensor module

The gas sensitive material used in the MQ-5 gas sensor is tin dioxide (SnO2), which has low conductivity in clean air. When there is combustible gas in the environment where the sensor is located, the conductivity of the sensor increases with the increase of the combustible gas concentration in the air.

Smart Electronics Duct type temperature and humidity sensor housing

Duct type temperature and humidity sensor housing 1. Copper sintered dust cover 2. Stainless steel lock wire seat 3. Good air permeability 4. Widely applicable 5. High cost performance

Smart Electronics MQ6 MQ-6 combustible gas/liquefied petroleum gas sensor probe dip6

MQ6 MQ-6 combustible gas/liquefied petroleum gas sensor probe dip6

Resistive thin film pressure sensor comb type B structure flexible sensor

Terminal type A2 male terminal Female terminal Female terminal plastic shell A1 male terminal Range 1kg small force 10Kg middle force 50kg vigorously 100g micro force

Smart Electronics Hall sensor A1344EUA-T AH3144E High sensitivity 402 switch 44E

Hall sensor A1344EUA-T AH3144E High sensitivity 402 switch 44E

Force Sensor RP-C18.3-ST Flexible Thin Film Pressure Sensor Intelligent 20g-6kg

The flexible sensor has the characteristics of flexible ultra-thin, ultra-low power consumption and extreme speed response, etc. Small size, this flexible pressure sensor is based on new nanometer pressure-sensitive materials ​supplemented by ultra-thin film substrate. This pressure sensor has the characteristic of high stability, high consistency. Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.

MQ-4 Gas Sensor Methane Module MQ4 Gas Methane Sensor Module for Arduinos

1. Size: 32mm X22mm X27mm length X width X height 2. The main chip: LM393, ZYMQ-4 gas sensor 3. Operating voltage: DC 5 Volt

DHT11 module digital temperature and humidity sensor dht-11 electronic building block (37 in one)

Product parameters: 1. Power supply voltage: 5V 2. Temperature error: 0-50℃ 3. Humidity range: 20-90%RH
Previous： Smart Electronics 100% Original A1943 C5200 2SA 1943 2SC5200 Audio Pair Tube TO-3PL 2SA1943
Next： Smart Electronics MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 gas sensor probe non-module
Return
TOP
86-755-83877216
smartbes
smartbes