Search

Original imported flexiforce film pressure sensor A301 1/25/100lbs

Products > Thin Film Pressure Sensor > Original imported flexiforce film pressure sensor A301 1/25/100lbs
    • 1

Original imported flexiforce film pressure sensor A301 1/25/100lbs

The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.



The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb).
The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing
the drive voltage and adjusting the resistance of the feedback resistor.
shared：

 

 

FlexiForc A301 Sensor

 

The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.

The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb).
The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing
the drive voltage and adjusting the resistance of the feedback resistor.

How to Adjust the Force Range:

*In order to measure higher forces, apply a lower drive voltage (-0.5 V, -0.25 V, etc.) and reduce the resistance
of the feedback resistor (1kohm min.) To measure lower forces, apply a higher drive voltage and increase the
resistance of the feedback resistor. 

For an alternative to the recommended circuit, see the Related Electronics tab.

Smart Electronics Original imported flexiforce film pressure sensor A301 1/25/100lbs

 

 Smart Electronics Original imported flexiforce film pressure sensor A301 1/25/100lbs


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Thin film pressure sensor resistive force sensitive and pressure sensitive plantar flexible PVDF robot tactile FSR402 406

Smart Electronics PT100 temperature sensor thermal resistance thermocouple WZP-035 probe waterproof and corrosion resistant high temperature

PT100 temperature sensor thermal resistance thermocouple WZP-035 probe waterproof and corrosion resistant high temperature Non-standard customization High temperature thermal resistance 450 degree specification price as above NTC thermal 4*30*2 meters K type PTFE low temperature 200 degrees 2*30mm*1m A grade three core

DHT11 module digital temperature and humidity sensor dht-11 electronic building block (37 in one)

Product parameters: 1. Power supply voltage: 5V 2. Temperature error: 0-50℃ 3. Humidity range: 20-90%RH

Smart Electronics TO-92 Temperature sensor 18B20 Sensor Electronic chip IC for sensor hall electronic components

TO-92 Temperature sensor 18B20 Sensor Electronic chip IC for sensor hall electronic components Condition:New Supply Voltage:standar Dissipation Power:standar Operating Temperature:standar Funtion:temperature sensor

Smart Electronics NTC Probe for immersion sensor custom steel tube 50mm

NTC Probe for immersion sensor custom steel tube 50mm 1.sensor well for immersion sensor , custom steel tubes 50mm G1/2 legth 56mm 2.sensor well for immersion sensor custom steel tubes 80mm G1/2 legth 86mm

FSR402 Force Sensing Resistor Long Tail Resistance-type Thin Film Pressure Sensor

Specification Sensing Area: 1.27cm / 0.5" Output Signal: Passive variable resistance Force Sensing Range: 0g~10kg Length: 6cm / 2.36" Width: 1.9cm / 0.75" Welcome to your kindly inquiry : )

MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000

●Support 100Ω to 1kΩ (at 0°C) platinum resistance RTD (PT100 to PT1000) ●Conversion time: 21ms (maximum) ●15-bit ADC resolution; nominal temperature resolution is 0.03125°C (non-linear change with RTD) ● Under the whole working conditions, the total accuracy is maintained at 0.5°C (0.05% full range) ● SPI compatible interface, compatible with 2-wire, 3-wire and 4-wire sensor connection

Smart Electronics MQ2 Mq-2 gas sensor probe

MQ2 Mq-2 gas sensor probe 1. Good sensitivity to combustible gas in a wide concentration range. 2. High sensitivity to methane 3. Long service life and low cost. 4. A simple drive circuit is enough. 5. Household gas leak alarm. 6. Industrial combustible gas alarm. 7. Portable gas detector.

MQ8 MQ-8 hydrogen sensor detection alarm module,Gas sensor module

The gas sensitive material used in the MQ-5 gas sensor is tin dioxide (SnO2), which has low conductivity in clean air. When there is combustible gas in the environment where the sensor is located, the conductivity of the sensor increases with the increase of the combustible gas concentration in the air.

M12 proximity switch sensor LJ12A3-4-Z/BX/BY/AX/AY/EX/DX/EZ/DZ normally open 24V

Current specification: 300mA Rated working voltage: DC: 6-36V Distance measurement: 4mm±10% Output mode: NPN NO (normally open) Level signal: low level Installation method: non-embedded Thread diameter: M12X1 Shell material: brass nickel plated Wire length: 1.2 meters

Original imported 0.2 "pressure sensor FSR400 Force sensitive resistor fsr sensor

Costom steel tube threades sleeve stainless steel temperature sensor NTC thermostat probe

Costom steel tube threades sleeve stainless steel temperature sensor NTC thermostat probe

Smart Electronics MQ-9 carbon monoxide Combustible gas sensor alarm module

MQ-9 carbon monoxide Combustible gas sensor alarm module Feature: Size: 32mm * 22mm * 27mm Main chip: LM393, MQ-9 gas sensors Working voltage: DC 5 V Characteristics: 1, having a signal output instruction. 2, dual signal output (analog output, and TTL level output) 3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller) 4, 0 - 5V analog output voltage, the higher the concentration the higher the voltage. 5, for CO, gas, liquefied petroleum gas with high sensitivity and good selectivity. 6, has a long life and reliable stability 7, rapid response and recovery characteristics Application: MQ-9 sensor main family, environmental detection of carbon monoxide gas for CO, gas, liquefied petroleum gas field testing;

Smart Electronics Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136

Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136 The gas-sensitive material used in the MQ136 hydrogen sulfide gas sensor is tin dioxide (SnO2) with low conductivity in clean air. When there is hydrogen sulfide gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of hydrogen sulfide gas in the air increases. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration.

Thin film pressure sensor, Square 16 nodes side length 20 mm flexible resistive motion sensor

The IMM0092 of Idong Film Electronics is a member of the single-node sensor family. Although IMM092 has 16 nodes, because IMM00092 has 32 lines of output, each node has 2 lines of output, and the 16 nodes are independent of each other. They are very reliable piezoresistive sensors. When the pressure (pressure) applied to the effective area of the sensor increases, the output resistance of the sensor decreases. Single-point sensors can be measured using a multimeter or customer's own circuit.

Smart Electronics MQ-7 MQ7 CO Gas Sensor, Carbon Monoxide Sensor motion sensor led lights

MQ-7 MQ7 CO Gas Sensor, Carbon Monoxide Sensor motion sensor led lights Characteristic: 1,Module size: 32(L)× 20(W)× 22(H) 2,Input voltage: DC5V. 3,Power dissipation: 150mA. 4,DO output: 0.1-5V. 5,AO output: 0.1-0.3V. 6,Detectable concentration: 10-1000ppmCO.

DHT90 SHT10 Digital temperature and humidity sensor with pin SHT10 Digital Humidity & Temperature Sensor

Smart Electronics WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor

WSH135 W135 hall element TO92, SOT23 package sensor linearity 1.5 mV/G hall sensor

Smart Electronics E-bike Accessories Brushless Electric Motor Hall Sensor 3144 Circuit Board 41F 43F with Wire

E-bike Accessories Brushless Electric Motor Hall Sensor 3144 Circuit Board 41F 43F with Wire Product Categories (please choose the one you need) 1. Two-wheeled 13A 120 degrees 2. Two-wheeled 413 120 degrees 3. Two-wheeled 41F 120 degrees 4. Two-wheeled 43F 120 degrees 5. Two-wheeled 3144 120 degrees 6. Two-wheeled 13A 60 degrees 7. Two-wheeled 413 60 degrees 8. Two-wheeled 41F 60 degrees 9. Two-wheeled 43F 60 degrees 10.Two-wheeled 3144 60 degrees

AM2305 Digital temperature and humidity sensor

1) The relative humidity and temperature, calibration of all digital output 2) Excellent long-term stability 3) Without additional components 4) Long distance signal transmission 5) ultra low power 6) 4 pin installation 7) Completely interchangeable
Previous： Thin film pressure sensor-single point circular diameter 4 mm flexible resistive FSR
Next： Force Sensor RP-C18.3-ST Flexible Thin Film Pressure Sensor Intelligent 20g-6kg
Return
TOP
86-755-83877216
smartbes
smartbes