Search

Smart Electronics MQ-3 detects alcohol sensor, ethanol sensor, combustible gas sensor probe

Products > Air Sensor > Smart Electronics MQ-3 detects alcohol sensor, ethanol sensor, combustible gas sensor probe
    • 1
    • 2
    • 3
    • 4

Smart Electronics MQ-3 detects alcohol sensor, ethanol sensor, combustible gas sensor probe

MQ-3 detects alcohol sensor, ethanol sensor, combustible gas senso

Feature
Product model: MQ-3
Product Type: Semiconductor gas sensor
Standard package: Bakelite (Black Bakelite)
Detection gas: alcohol vapor
Detection concentration: 0.04-4mg/L alcohol
shared：

MQ-3 detects alcohol sensor, ethanol sensor, combustible gas sensor probe



Feature
Product model: MQ-3 Product Type: Semiconductor gas sensor Standard package: Bakelite (Black Bakelite) Detection gas: alcohol vapor Detection concentration: 0.04-4mg/L alcohol
Send Message to us *  Part Number | Package Type | Quantity are needed if you send messages to us *  Send all models you are looking for to us,we can quote all of them. *  Welcome to attach Purchase / Factory Bom
Certifications
Exhibition
Customer Photos
Shipping
Thank you for all your supports !   ^_^ 
Have a good day ~


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics MQ-9 carbon monoxide Combustible gas sensor alarm module

MQ-9 carbon monoxide Combustible gas sensor alarm module Feature: Size: 32mm * 22mm * 27mm Main chip: LM393, MQ-9 gas sensors Working voltage: DC 5 V Characteristics: 1, having a signal output instruction. 2, dual signal output (analog output, and TTL level output) 3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller) 4, 0 - 5V analog output voltage, the higher the concentration the higher the voltage. 5, for CO, gas, liquefied petroleum gas with high sensitivity and good selectivity. 6, has a long life and reliable stability 7, rapid response and recovery characteristics Application: MQ-9 sensor main family, environmental detection of carbon monoxide gas for CO, gas, liquefied petroleum gas field testing;

Smart Electronics Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136

Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136 The gas-sensitive material used in the MQ136 hydrogen sulfide gas sensor is tin dioxide (SnO2) with low conductivity in clean air. When there is hydrogen sulfide gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of hydrogen sulfide gas in the air increases. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration.

Smart Electronics MQ6 MQ-6 combustible gas/liquefied petroleum gas sensor probe dip6

MQ6 MQ-6 combustible gas/liquefied petroleum gas sensor probe dip6

Smart Electronics 41F bipolar latch 012 hall sensor AH41 sensor 43A Electric vehicle 43F electric motor SS41F SS443A

41F bipolar latch 012 hall sensor AH41 sensor 43A Electric vehicle 43F electric motor SS41F SS443A

Smart Electronics High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

Smart Electronics PIR IR Light Motion Sensor Infrared Human Induction Lamp Switch 220V 50HZ Lights Control Ceiling On Off 3-6m Sensing

PIR IR Light Motion Sensor Infrared Human Induction Lamp Switch 220V 50HZ Lights Control Ceiling On Off 3-6m Sensing Product Parameter: 1.Sensing Mode:PIR sensing + light control 2.Rated Voltage:220V 50HZ 3.Output Way:Controllable Silicon 4.Load Power:filament lamp ≤100W electricity saving lamp ≤30W LED≤18W 5.Delay:20s (people are moving within the sensing range, the switch will auto delay ​and keep connecting;if people stay still,switch will stop responsing) 6.Sensing Distance:3-6m (high temperature will influence switch sensibility) 7.Sensing Angle:110° 8.Sensitivity to light :darkeness

Smart Electronics Stainless steel temperature sensor probes

Stainless steel temperature sensor probes

Smart Electronics FSR406 Pressure Sensor , 100% New and Original Force Sensitive Resistor

FSR406 Pressure Sensor , 100% New and Original Force Sensitive Resistor This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Smart Electronics Duct type temperature and humidity sensor housing

Duct type temperature and humidity sensor housing 1. Copper sintered dust cover 2. Stainless steel lock wire seat 3. Good air permeability 4. Widely applicable 5. High cost performance

Smart Electronics FSR402 Force Sensing Resistor Long Tail Resistance-type Thin Film Pressure Sensor

FSR402 Force Sensing Resistor Long Tail Resistance-type Thin Film Pressure Sensor Specification Sensing Area: 1.27cm / 0.5" Output Signal: Passive variable resistance Force Sensing Range: 0g~10kg Length: 6cm / 2.36" Width: 1.9cm / 0.75" Welcome to your kindly inquiry : )

Smart Electronics Thin film pressure sensor resistive force sensitive and pressure sensitive plantar flexible PVDF robot tactile FSR402 406

Thin film pressure sensor resistive force sensitive and pressure sensitive plantar flexible PVDF robot tactile FSR402 406

Smart Electronics TO-92 Temperature sensor 18B20 Sensor Electronic chip IC for sensor hall electronic components

TO-92 Temperature sensor 18B20 Sensor Electronic chip IC for sensor hall electronic components Condition:New Supply Voltage:standar Dissipation Power:standar Operating Temperature:standar Funtion:temperature sensor

Smart Electronics Hall sensor A1344EUA-T AH3144E High sensitivity 402 switch 44E

Hall sensor A1344EUA-T AH3144E High sensitivity 402 switch 44E

Smart Electronics AM2305 Digital temperature and humidity sensor

AM2305 Digital temperature and humidity sensor 1) The relative humidity and temperature, calibration of all digital output 2) Excellent long-term stability 3) Without additional components 4) Long distance signal transmission 5) ultra low power 6) 4 pin installation 7) Completely interchangeable

Smart Electronics SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original

SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original SHT1x - Digital Temperature and Humidity Sensor (RH/T) SHT1x series SHT10 - low cost version, ±4.5% RH accuracy SHT11 - standard version, ±3% RH accuracy SHT15 - high-end version, ±2% RH accuracy

Smart Electronics HAL506 UA-2 TO92-UA Automotive Hall Sensor

HAL506 UA-2 TO92-UA Automotive Hall Sensor Model: HAL506 UA-2 Description: TO92-UA Packaging: CutTape(CT) AlternatePackaging Series: HAL®5xy Part status: LastTimeBuy Technology: Hall Effect Voltage-power supply: 3.8V~24V Current-power supply (maximum): 5.2mA Current-output (maximum): 20mA Output type: OpenDrain Feature: TemperatureCompensated Working temperature: -40°C~140°C (TJ) Installation type: ThroughHole Supplier device package: TO-92UA-2 Package/Shell: TO-226-3TO-92-3ShortBody

Smart Electronics High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor

High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor Film pressure sensor is piezoresistive, also known as resistive, equivalent to varistor in the circuit. When the sensor has no external load, the circuit is in high resistance state (generally greater than 2m Ω). When the external pressure is applied to the sensor, the circuit resistance will decrease (tens of K Ω or less). With a multimeter, the resistance value can be read directly by connecting to two external terminals. The resistance value changes with the change of external pressure. The voltage is inversely proportional to the resistance, while the voltage カ is linearly related to the conductivity, so the pressure change can be inversely deduced according to the conductivity change.

Smart Electronics MQ-7 MQ7 CO Gas Sensor, Carbon Monoxide Sensor motion sensor led lights

MQ-7 MQ7 CO Gas Sensor, Carbon Monoxide Sensor motion sensor led lights Characteristic: 1,Module size: 32(L)× 20(W)× 22(H) 2,Input voltage: DC5V. 3,Power dissipation: 150mA. 4,DO output: 0.1-5V. 5,AO output: 0.1-0.3V. 6,Detectable concentration: 10-1000ppmCO.
Previous： Smart Electronics MQ6 MQ-6 combustible gas/liquefied petroleum gas sensor probe dip6
Next： Smart Electronics MQ2 Mq-2 gas sensor probe
Return
TOP
86-755-83877216
smartbes
smartbes