Search

Smart Electronics 300W 20A DC-DC Buck Converter Step Down Module Constant Current LED Driver Power Step Down Voltage Module

Products > Power Supply Module > Smart Electronics 300W 20A DC-DC Buck Converter Step Down Module Constant Current LED Driver Power Step Down Voltage Module
    • 1
    • 2
    • 3
    • 4

Smart Electronics 300W 20A DC-DC Buck Converter Step Down Module Constant Current LED Driver Power Step Down Voltage Module

300W 20A DC-DC Buck Converter Step Down Module Constant Current LED Driver Power Step Down Voltage Module
shared：
300W 20A DC-DC Buck Converter Step Down Module Constant Current LED Driver Power Step Down Voltage Module

With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current.
The efficiency can be up to 96%, measured at 20A, converting 24V to 12V.
It is designed with 75V/80A large current dual MOS tube.
Input and output use high frequency low resistance electrolytic capacitor, low ripple, stable output.
Wiring is convenient with these large current 30A screw terminals.
The buck module has 2 heat sink that could enhance heat dissipation.
When there is a big difference between input and output voltage, please decrease power and current.


Input Voltage: 6V to 40V DC(10V to 40V is suggested)
Output Voltage: 1.2V to 36V DC
Output Current: 20A(max.), 15A(suggested)
Efficiency: 95%(24V to 12V, 20A)
Output Ripple: ≤50mV
Wiring Method: Terminal
Short Circuit Protection: Self-recovery(cannot short circuit for long time)
Size: 60 x 53 x 27mm / 2.36 x 2.08 x 1.06"
  
VO+: Output positive
VO-: Output negative
+IN: Input positive 
-IN: Input negative
CV: Output voltage adjustment
CC: Output current adjustment
EN: Enable, low voltage level shut off output; suspension, high voltage level is effective
When input and output is common grounded, no-load CV output constant voltage,CC output constant current


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics Ultra-small quad-core A9 S5P4418 development board NanoPi Fire2A, support Ubuntu+Qt5.9

Ultra-small quad-core A9 S5P4418 development board NanoPi Fire2A, support Ubuntu+Qt5.9 [Package selection] 1, the board 2, single board + heat sink 3, the basic package: single board + heat sink + power head + USB line 4, development package: single board + heat sink + power head + USB cable + TF card + card reader + USB to TTL board + serial expansion board + cross serial cable + cross network cable + DVP camera + USB camera [Screen selection] 1, no screen 2, 4.3 inch capacitive screen [Model: S430] 3, 7 inch capacitive screen [Model: X710]

CSR8645 4.0 audio module, support APTx lossless compression speaker amplifier

The main control chip CSR8645 stereo audio module can make calls. The headset can be connected to 2 mobile phones at the same time. CSR has better sound quality. BLE 4.0, good wall penetration effect, APT-x high sound quality transmission.

Smart Electronics Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger

Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger The input voltage: 5V2A output : 5V1A The input voltage: 5V4A 9V1.67A(qc3.0) Output : 5V2A 9V1A Charging current: 1000mAh Charging power: up to 10W Wireless conversion efficiency: 73%, boost circuit 90%

Smart Electronics TTGO T-Display ESP32 WiFi And Ble Module Development Board

TTGO T-Display ESP32 WiFi And Ble Module Development Board Chipset： ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH： QSPI flash 4MB SRAM： 520 kB SRAM Button： Reset USB to TTL： CP2104 Modular interface： UART,SPI,SDIO,I2C,LED PWM,TV PWM,I2S,IRGPIO,ADC,capacitor touch sensor,DACLNA pre-amplifier

Smart Electronics AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board Product Description: Input voltage: AC 100-240V 50/60HZ Output Voltage: DC 24V Output Current: 6-9A Output Power: 150W ( Max 220W ) Location Pore Size: 105.8 x 55.7mm Overall Dimensions: 115 x 65mm Ripple Noise: Less than 150MV Overcurrent protection: Yes Overload Protection: Yes Short circuit protection: Yes

Smart Electronics DC 5V & DC12V ESP8266 WIFI 4-Channel Relay Module IoT Wireless Transmitter

DC 5V & DC12V ESP8266 WIFI 4-Channel Relay Module IoT Wireless Transmitter ESP8266 WIFI 4-Channel Relay Module is 4 channel WIFI relay module carried a ESP8266 WIFI module and mature 8 bit MCU, with Professional switching power supply circuit.It could control the relay by Android phone APP within the local area network (LAN).It is easy to set .

STM32F103C8T6 ARM STM32 Minimum System Development Board Module

CH32F103C8T6 chip is compatible with STM32F103C8T6 series chips, all pins are compatible, all registers are compatible.

SIM900A module, development board, GSM/GPRS/STM32 \ super TC35i wireless data transmission module

Product Description: ardu 51 STM32 AVR MCU compatible Prototype expand The dual frequency 900/ 1800 MHz, GPRS multi-slot class 10/8,GPRS mobile station class B Power supply range: voltage is 4.6-5.2v; current is 1A or more(the current is very important). Low power consume: 1.5mA (sleep mode) Operating temperature range: -40 degrees C to +85 C Communication interface: The TTL level serial interface compatible 2.85 3.3 5v MCU Size:49*50mm

Smart Electronics 3.5-inch TFT LCD display screen module serial port SPI driver ILI9488 with capacitive touch RGB 320 * 480

3.5-inch TFT LCD display screen module serial port SPI driver ILI9488 with capacitive touch RGB320 * 480

Smart Electronics DC DC Boost Converter Constant Module Current Mobile Power Supply 250W 10A LED Driver Module Non-isolated Step Up Module

DC DC Boost Converter Constant Module Current Mobile Power Supply 250W 10A LED Driver Module Non-isolated Step Up Module Applications: 1, DIY a power supply, 12V can input and output can 12-50V adjustable. 2, the power supply for your electronic device, according to your system can set the output voltage value. 3, as the car power supply for your laptop, PDA or a variety of digital products supply. 4, DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack, so you can go where light where books. 5, solar panel regulator.

USB Power Bank Charger Circuit Board Step Up Boost Power Module + 5S 18650 Li-ion Case Shell DIY Kit Powerbank

1.Aplly Battery Type:18650 battery(not include) 2.Output Voltage: 5V 2.1A 3.Input Voltage: 5V1A 4.Instructions: Level 4 Capacity indicator 5.Lighting: with LED lights 6.Size: 140 * 64 * 22mm 7.Rated Voltage : 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)

Smart Electronics KY-013 3PIN Analog temperature sensor module KY-013

KY-013 3PIN Analog temperature sensor module KY-013

Smart Electronics DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module

DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module product description: Power amplifier chip: TPA3118 Amplifier power: 1*60W Supply voltage: 8~24VDC Speaker impedance: 4-8Ω Size: 46*35*1.6mm (length, width and thickness) Total height of the board: 12mm

L298N motor driver board module intelligent vehicle robot accessory H-bridge drive stepper motor driver

Smart Electronics New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module

New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module Temperature (Operation): -20°C to 70°C Temperature (Stable Image) : 0°C to 50°C Focus :Fixed Object distance:30CM-∞ Resolution: 800LW/PH (Center) Working power supply : 3.3v(pin15) Operating system: for Raspberry Pi Certifications :FCC and CE Sensor Type: OV5647 (1/4” ) Active Array Size : 2592*1944 Sensitivity: 600mV/Lux-sec F/No: 2.35 EFL: 1.55 mm BFL(Optical): 3.1mm FOV: 160° TV Distortion :<14.5% Relative Illumination (Sensor) : 70% IR Filter : 650±10nm

Smart Electronics MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor

MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor MH-Z19B 0-5000PPM Mh-z19c 400-5000ppm C is an upgrade of B Carbon dioxide gold shell (non mh-z19) 400-5000ppm Carbon dioxide white shell (non mh-z19) 400-5000ppm

Smart Electronics 4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board 14.4V 14.8V 16.8V BMS

4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board 14.4V 14.8V 16.8V BMS 1. Module name: 4 series lithium battery protection board 2. Modular nature: polymer lithium battery protection board 3. Overcharge detection voltage: 4.25 ± 0.025V 4. Overcharge release voltage: 4.15 ± 0.05V 5. Overdischarge detection voltage: 2.50 ± 0.08V 6. Over-discharge termination voltage: 3 ± 0.1V 7. Overcurrent: 20-30A

Smart Electronics Dual coil fast wireless charger transmitter module PCBA board + 2 coil general qi standard diy board

Dual coil fast wireless charger transmitter module PCBA board + 2 coil general qi standard diy board Product Parameters 1. Input power supply: 5V 2A or 9V 1.67-2a, output: 5V 1A or 9V 1.2A 2. Product weight: 0.035kg 3. Charging power: 5W / 7.5w/10w automatic identification 4. Transmission distance: 2-8mm 5. Executive standard: Qi wireless charging standard 6. Product certification: CE / FCC / RoHS

Smart Electronics JDY-16 Ble 4.2 module high-speed transparent BLE support airsync iBeacon super CC2541

JDY-16 Ble 4.2 module high-speed transparent BLE support airsync iBeacon super CC2541 Feature No byte limit for serial port transmission and reception during transparent transmission Effective communication distance within 80 meters Working temperature: -40~+80 ℃ Communication rate 8k Bytes per second Support UART and IIC communication methods Working voltage: 1.8-3.3V
Previous： electronic smd coil inductor 10UH 100UH 10MH 150UH 1MH 2.2MH 220UH 330UH 470UH Winding inductance CD75 power inductor
Next： Type-C PD decoy module PD23.0 to DC DC trigger extension cable QC4 charger 9V 12V 15V 20V PDC004-PD
Return
TOP
86-755-83877216
smartbes
smartbes