Search

Smart Electronics QC2.0 QC3.0 Quick Charging USB Mobile Phone Charging Board DC Step-down Module

Products > Module > Smart Electronics QC2.0 QC3.0 Quick Charging USB Mobile Phone Charging Board DC Step-down Module
    • 1
    • 2
    • 3
    • 4
    • 5

Smart Electronics QC2.0 QC3.0 Quick Charging USB Mobile Phone Charging Board DC Step-down Module

QC2.0 QC3.0 Quick Charging USB Mobile Phone Charging Board DC Step-down Module
shared：

Input voltage range: 6V-32V
Output voltage: default 5V, automatically adjusted between 3-12V after triggering fast charging
Output power: maximum 24W（ 5V@3.4A , 9V@2.5A , 12V@2A etc.)
Conversion efficiency: 90% -97%
Supports multiple fast charging protocols
Input overvoltage and undervoltage protection
Input overcurrent protection
Output overcurrent and short circuit protection
Overall over temperature protection


You can choose
1.Fast charging module
(without interface)

2.2-way fast charging module (with interface)

3.4-way fast charging module (with interface)

The one with interface is
DC5.5 * 2.5
1 channel size: 34 * 16

Product Application
1.Switching solar panels to mobile phone charging
2.Tram charging renovation 3.Driving recorder power supply 4.Renovation of household power supply and intelligent insertion 5.Fast charging adapter


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics DC 12V XK-GK-4010A Hand Sweep Sensor Switch Module Short Distance Scan Sensors Diy Kit PCB Board

DC 12V XK-GK-4010A Hand Sweep Sensor Switch Module Short Distance Scan Sensors Diy Kit PCB Board

Smart Electronics GSM module, SIM808 Module with GPS antenna GSM GPRS GPS development board

GSM module, SIM808 Module with GPS antenna GSM GPRS GPS development board This module is 5-12V power supply, when the power supply is less than 9V, 2A DC is required. The other power supply port is 3.5-4.2V, suitable for lithium battery power supply. The computer can debug USB-TTL. Suitable for portable. Two sets of antenna SMA ports, GPS and GSM antennas are provided.

Smart Electronics Golden SW-520D Angle Sensor Module Ball Switch Vibration Switch Tilt Sensor Module

Module features: 1. Using high sensitivity angle switch SW-520D as the sensor 2. Comparator output, clean signal, good waveform, strong driving ability, exceeding 15mA. 3. Working voltage 3.3V-5V 4. Output form: Digital switch output (0 and 1) 5. Equipped with fixed bolt holes for easy installation 6. Small PCB size: 3.2cm x 1.4cm 7. Using a wide voltage LM393 comparator

Smart Electronics New TPA3116 amplifier board BLE 5.0 high-power 2.1 tpa3116 d2 subwoofer digital amplifier board 12-24V finished board

New TPA3116 amplifier board BLE 5.0 high-power 2.1 tpa3116 d2 subwoofer digital amplifier board 12-24V finished board

Smart Electronics 4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board 14.4V 14.8V 16.8V BMS

4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board 14.4V 14.8V 16.8V BMS 1. Module name: 4 series lithium battery protection board 2. Modular nature: polymer lithium battery protection board 3. Overcharge detection voltage: 4.25 ± 0.025V 4. Overcharge release voltage: 4.15 ± 0.05V 5. Overdischarge detection voltage: 2.50 ± 0.08V 6. Over-discharge termination voltage: 3 ± 0.1V 7. Overcurrent: 20-30A

Smart Electronics High power three channel amplifier module TDA2050+TDA2030 2.1 subwoofer amplifier circuit board

High power three channel amplifier module TDA2050+TDA2030 2.1 subwoofer amplifier circuit board

Smart Electronics Digital Sensor TTP223B TTP223 Module Capacitive Touch Switch

TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories The module is a capacitive touch switch module based on touch detection IC (ttp223b). Under normal condition,the module outputs low level and the mode is low power consumption mode; when touching the corresponding position with fingers, the module outputs high level and the mode switches to fast mode; when there is no touch for 12 seconds, the mode switches to low power consumption mode.

Smart Electronics 0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface

0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface Feature Size: 0.49 inch Dot matrix: 64*32 Monochrome: white, blue Hardware interface: I2C (14 feet) Driver chip: SSD1306/SH1106 Drive voltage: 3.3V Working temperature: -40℃-+70℃; Storage temperature: -40℃-+85℃; Product features: self-luminous, high brightness, high contrast, ultra-thin, full viewing angle, visible under sunlight, wide temperature, low power consumption, fast response speed

Smart Electronics 1S 3A/5-6A BMS PCB Protection Board For 3.7V 18650 Li-Ion Lithium Battery

1S 3A/5-6A BMS PCB Protection Board For 3.7V 18650 Li-Ion Lithium Battery

Smart Electronics Ultra-small quad-core A9 S5P4418 development board NanoPi Fire2A, support Ubuntu+Qt5.9

Ultra-small quad-core A9 S5P4418 development board NanoPi Fire2A, support Ubuntu+Qt5.9 [Package selection] 1, the board 2, single board + heat sink 3, the basic package: single board + heat sink + power head + USB line 4, development package: single board + heat sink + power head + USB cable + TF card + card reader + USB to TTL board + serial expansion board + cross serial cable + cross network cable + DVP camera + USB camera [Screen selection] 1, no screen 2, 4.3 inch capacitive screen [Model: S430] 3, 7 inch capacitive screen [Model: X710]

Smart Electronics DC DC Boost Converter Constant Module Current Mobile Power Supply 250W 10A LED Driver Module Non-isolated Step Up Module

DC DC Boost Converter Constant Module Current Mobile Power Supply 250W 10A LED Driver Module Non-isolated Step Up Module Applications: 1, DIY a power supply, 12V can input and output can 12-50V adjustable. 2, the power supply for your electronic device, according to your system can set the output voltage value. 3, as the car power supply for your laptop, PDA or a variety of digital products supply. 4, DIY a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack, so you can go where light where books. 5, solar panel regulator.

Smart Electronics High Power TDA3116D2 Two Channel Audio Digital Amplifier Board 12-24V 100Wx2

High Power TDA3116D2 Two Channel Audio Digital Amplifier Board 12-24V 100Wx2 Item: XH-M190 Name: Digital Audio Amplifier Model: XH-M190 The number of chips: dual-core chips Chip Name: TPA3116D2 Input power: DC12V-24V Output power: 100Wx2 Input Impedance: 51Kx2 Power efficiency:> 90% Output resistance: 4-8Ohm Frequency range: 14-100KHz Noise ratio: 100db Output channel: left and right dual channel Size: 105 * 65 * 23MM Net weight: 90g

Smart Electronics XH-M542 Mono Digital Power Amplifier Board TPA3116D2 High Power Amplifier 100W

XH-M542 Mono Digital Power Amplifier Board TPA3116D2 High Power Amplifier 100W Product parameters: Supply voltage: DC12-26V Output power: 100W Signal to noise ratio: 100db Number of channels: mono Product size: 79*54*16(mm)

Smart Electronics New Open MV4 H7 Plus Intelligent Visual Recognition Module Raspberry Pi Camera AI Camera Module

New Open MV4 H7 Plus Intelligent Visual Recognition Module Raspberry Pi Camera AI Camera Module Processor: STM32H7 Clock Speed: 480 MHz RAM: 1 MB FLASH: 2 MB NN Neural Network Global Shutter Infrared Thermal Imaging Removable Image Sensor Double the Performance Higher Frame Rate

Smart Electronics New Original SIMCOM SIM7000A SIM7000G SIM7000E, NB/CAT-M/GSM Module

New Original SIMCOM SIM7000A SIM7000G SIM7000E, NB/CAT-M/GSM Module

Smart Electronics HC-SR505 Mini sensor di movimento a infrarossi PIR sensor preciso a infrarossi SR505

HC-SR505 Mini sensor di movimento a infrarossi PIR sensor preciso a infrarossi SR505

Smart Electronics Dual coil fast wireless charger transmitter module PCBA board + 2 coil general qi standard diy board

Dual coil fast wireless charger transmitter module PCBA board + 2 coil general qi standard diy board Product Parameters 1. Input power supply: 5V 2A or 9V 1.67-2a, output: 5V 1A or 9V 1.2A 2. Product weight: 0.035kg 3. Charging power: 5W / 7.5w/10w automatic identification 4. Transmission distance: 2-8mm 5. Executive standard: Qi wireless charging standard 6. Product certification: CE / FCC / RoHS

Smart Electronics USB Power Bank Charger Circuit Board Step Up Boost Power Module + 5S 18650 Li-ion Case Shell DIY Kit Powerbank

USB Power Bank Charger Circuit Board Step Up Boost Power Module + 5S 18650 Li-ion Case Shell DIY Kit Powerbank 1.Aplly Battery Type:18650 battery(not include) 2.Output Voltage: 5V 2.1A 3.Input Voltage: 5V1A 4.Instructions: Level 4 Capacity indicator 5.Lighting: with LED lights 6.Size: 140 * 64 * 22mm 7.Rated Voltage : 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)

Smart Electronics Flame Sensor Module Fire Source Detection Infrared Receiver Module (3 Wire System)

Flame Sensor Module & Infrared Receiving Module (3-wire System) ,Blue Board The flame sensor is sensitive to flame and is also reactive to ordinary light. It is generally used for flame alarms and other purposes. the small board output interface can be directly connected to the IO port of the microcontroller small board analog output mode and AD conversion processing, can achieve higher precision

Smart Electronics RFID card reader module RC522 serial port reader 13.56mhz IC card RF module development board

RFID card reader module RC522 serial port reader 13.56mhz IC card RF module development board Product model: RC522 Sleep current:<80uA Peak current:<30mA Working frequency: 13.56MHz Card reading distance: 0-45mm Interface: UART TTL Baud rate: 115200 Data transmission rate: limited to 10Mbit/s Environmental working temperature: -20-80 degrees Celsius Storage temperature: -40-85 degrees Celsius Humidity: Relative humidity 5% -95% Protocol: Compliant with ISO14443A standard, supports S50, S70
Previous： Smart Electronics High power three channel amplifier module TDA2050+TDA2030 2.1 subwoofer amplifier circuit board
Next： Smart Electronics Raspberry pi 0 Zero Raspberry Pi Zero Pi W version Original Development Board
Return
TOP
86-755-83877216
smartbes
smartbes