Search

Smart Electronics 1S 3A/5-6A BMS PCB Protection Board For 3.7V 18650 Li-Ion Lithium Battery

Products > Module > Smart Electronics 1S 3A/5-6A BMS PCB Protection Board For 3.7V 18650 Li-Ion Lithium Battery
    • 1
    • 2
    • 3
    • 4
    • 5
    • 6

Smart Electronics 1S 3A/5-6A BMS PCB Protection Board For 3.7V 18650 Li-Ion Lithium Battery

1S 3A/5-6A BMS PCB Protection Board For 3.7V 18650 Li-Ion Lithium Battery
shared：

1S 3A/5-6A BMS PCB Protection Board For 3.7V 18650 Li-Ion Lithium Battery
Features:
100% brand new and high quality
Made of high quality material, durable and practical to use
The main IC uses the original "precision" imported components.
With over charge, over discharge, short circuit, over current protection, suitable for a variety of different shapes of 3.N
capacity lithium battery.
Using precision protection IC, VISHAY, AOS, IR and other high quality MOSFETs, FR-4 low temperature coefficient board, carefully designed to fully test the compact size.
Suitable for many requirements of high integration, low cost occasions.
Can meet a lot of performance requirements, to ensure the absolute safety of the battery pack.
Low current consumption.
Performance is stable.
Fine workmanship and durability.

Connection instructions:
B + connect battery +
B-connected battery -
P + for battery output +
P- for battery output input -
Parameters:
Size: 18 * 3.6mm(Approx.)
Overcharge release voltage: 4.23±0.05V
Overcharge voltage range: 4.25±0.05V
Overdischarge voltage range: 2.54±0.1V
Overcurrent detection current: 2-3 A/ 5-6 A
Main functions: overcharge protection, over discharge protection, short circuit protection, over current protection.
Package Contents :
10*Protection Plate With Soldering Strip


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

NRF52832 Low Power Ble 4.2 Module 2.4G Wireless Module BLE4.0 4.2 Module

Smart Electronics Sound sensor module voice control switch strength detection audio amplifier microphone LM386

Sound sensor module voice control switch strength detection audio amplifier microphone LM386 The LM386 is an audio integrated power amplifier with its own low power consumption, adjustable gain for updating the internal chain, wide supply voltage range, fewer external components and less total harmonic distortion. It is mainly used in low-voltage consumer products. In order to minimize the peripheral components, the voltage gain is built-in as 20, and by adding an external resistor and capacitor between pin 1 and pin 8, the voltage gain can be adjusted to any value within 200.

Smart Electronics Golden SW-520D Angle Sensor Module Ball Switch Vibration Switch Tilt Sensor Module

Module features: 1. Using high sensitivity angle switch SW-520D as the sensor 2. Comparator output, clean signal, good waveform, strong driving ability, exceeding 15mA. 3. Working voltage 3.3V-5V 4. Output form: Digital switch output (0 and 1) 5. Equipped with fixed bolt holes for easy installation 6. Small PCB size: 3.2cm x 1.4cm 7. Using a wide voltage LM393 comparator

Smart Electronics Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger

Wireless Charger 10W 7.5W PCBA Circuit Board Coil Module DIY Charger The input voltage: 5V2A output : 5V1A The input voltage: 5V4A 9V1.67A(qc3.0) Output : 5V2A 9V1A Charging current: 1000mAh Charging power: up to 10W Wireless conversion efficiency: 73%, boost circuit 90%

Smart Electronics 0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)

0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)

Smart Electronics GY-291 ADXL345 Digital Three 3 Triple Axis Sensor Acceleration Module IIC SPI Replace ADXL335

GY-291 ADXL345 Digital Three 3 Triple Axis Sensor Acceleration Module IIC SPI Replace ADXL335 1. Adxl345 digital three-axis acceleration of gravity tilt module Ar code iic / spi. 2. Name: the adxl345 module (three-axis acceleration of gravity). 3. use the chip: the adxl345. 4. power supply :3-5v. 5. means of communication: the iic / spi communication protocol. 6. measuring range: ± 2g ± 16g. 7. schematics, manuals and reference documentation of relevant data. 8. 51, the avr, the Ar microcontroller test code. 9. 3-axis, ± 2g / ± 4g / ± 8g / ± 16g.

Rotating potentiometer knob cap Digital control module Rotary encoder module

Digital control module Rotary encoder module rotating potentiometer knob cap Working voltage: 5 v A circle of pulse count: 20 Rotary encoder through rotation direction and reverse direction can count is in the process of the number of output pulse, rotating counter unlike potentiometer, the rotation count there is no limit.Cooperate with the buttons on the rotary encoder, can be reset to the initial state, that is, from zero start counting.

Smart Electronics ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

Smart Electronics XH-M203 Full Automatic Water Level Controller Pump Switch Module AC/DC 12V Relay

XH-M203 Full Automatic Water Level Controller Pump Switch Module AC/DC 12V Relay

Smart Electronics Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense

Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense Raspberry Pi Sense HAT provides power and data connectivity via the Raspberry Pi motherboard 40Pin GPIO interface. To create the "Astro Pi", the Sense HAT sensor module integrates common sensors, making it usable in a variety of different types of experiments, applications, and even It is a game.

Smart Electronics CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

Smart Electronics JDY-08 blue tooth 4.0BLE low-power CC2541 master-slave integrated support airsync iBeacon module

JDY-08 blue tooth 4.0 BLE low-power CC2541 master-slave integrated support airsync iBeacon module

Smart Electronics 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module Use precautions: 1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and ​negative do not pick wrong 2. Recommended power supply ±65V 3. Recommended 4-8Ω / 10-18inch speaker 4. Carefully check before electricity, ensure the wiring is correct.

Smart Electronics High power three channel amplifier module TDA2050+TDA2030 2.1 subwoofer amplifier circuit board

High power three channel amplifier module TDA2050+TDA2030 2.1 subwoofer amplifier circuit board

Smart Electronics New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module

New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module Temperature (Operation): -20°C to 70°C Temperature (Stable Image) : 0°C to 50°C Focus :Fixed Object distance:30CM-∞ Resolution: 800LW/PH (Center) Working power supply : 3.3v(pin15) Operating system: for Raspberry Pi Certifications :FCC and CE Sensor Type: OV5647 (1/4” ) Active Array Size : 2592*1944 Sensitivity: 600mV/Lux-sec F/No: 2.35 EFL: 1.55 mm BFL(Optical): 3.1mm FOV: 160° TV Distortion :<14.5% Relative Illumination (Sensor) : 70% IR Filter : 650±10nm

RS422 to TTL/UART/MCU Serial Port Signal Mutual Module with Over-Voltage Over-Current Protection-3.3V

VCC: + 3.3V TXD : The module's TTL (UART) to send, connected to the microcontroller's RXD receiver pin; RXD : The module's TTL (UART) receiver, connected to the microcontroller TXD send pin; GND : The module ground wire (this wire must be connected with the ground wire of microcontroller system);

Smart Electronics AMG8833 Module GY- AMG8833 IR 8x8 Infrared Camera Array Temperature Sensor Module

AMG8833 Module GY- AMG8833 IR 8x8 Infrared Camera Array Temperature Sensor Module

Smart Electronics Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board

Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board This plate with switching function, SW short, will turn off the power amplifier Working Mode: Class D (PWM modulation type) Chip Type: PAM8610 Power Range: DC 6V-15V (self-protection) Recommended Voltage: DC 12V(2A) Output Power: 10Wx2(8Ω) 15Wx2(4Ω) Frequency Response: 20HZ-15KHZ Static Current: 20MA (DC12V) SNR: 90% Recommended Speakers: 10-100W Input Impedance: 15K Output Impedance: 4-8Ω Harmonic Distortion: <0.1% Size: Approx. 3cm x 2.5cm/ 1.19" x 0.98"
Previous： Smart Electronics LED touch program development infinitely dimmable single keypad three keypad small desk lamp control circuit board pcba
Next： Smart Electronics Cell Pack Module Original 3S 25A Li-ion 18650 BMS PCM Battery Protection Board With Balance For li-ion Lipo Battery
Return
TOP
86-755-83877216
smartbes
smartbes