Search

Smart Electronics Sound Detection Sensor Module Sound Sensor Vehicle

Products > Sensor Module > Smart Electronics Sound Detection Sensor Module Sound Sensor Vehicle
    • 1
    • 2
    • 3
    • 4

Smart Electronics Sound Detection Sensor Module Sound Sensor Vehicle

Sound Detection Sensor Module Sound Sensor Vehicle
shared：
Module Description There is a mounting screw hole 3mm. Use 5v DC power supply There are threshold level output flip. Real-time output of the microphone voltage signal / DO. when the sound intensity reaches a threshold The output high and low signal threshold - Sensitivity potentiometer adjustmen. Application:Microphone sound detectionFeature
1. Can detect ambient sound intensity, the use of note: the sensor can only identify the presence of (according to the principle
of vibration) of sound does not recognize the sound or the size of the particular frequency of sound.
2. Sensitivity adjustable
3. Working voltage:DC 4-6V
4. The output form Digital switch output (1 s and 0 s + v)
5. Equipped with a fixed bolt hole, convenient installation
6. Size:34mm*16mm*15mm(length*width*height)


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

MAX7219 led dot matrix module 4 in 1 display module single chip microcomputer control drive module with 5p wire

MAX7219 is an integrated serial input/output common-cathode display driver, which connects a microprocessor and an 8-digit 7-segment digital LED display, and can also be connected to a bar graph display or 64 independent LEDs. It includes an on-chip B-type BCD encoder, multiple scan loops, segment word drivers, and an 8*8 static RAM to store each data. Only one external register is used to set the segment current of each LED.

BH1750FVI digital Light Intensity BH1750 Light Module Light Ball DC5V

Keyes BH1750FVI Digital Light Sensor Module is a kind of integrated circuit of digital light intensity sensor for two-wire serial bus interface. Using the light intensity data collected by the module, the brightness of the LCD and keyboard background lamps can be adjusted. Module resolution can detect wide range of light intensity changes.

W1209 LED Digital Thermostat Temperature Control Thermometer Thermo Controller Switch Module DC 12V Waterproof NTC Sensor

Temperature range :-50-110 ° Dimensions: 48.5 * 40mm Temperature control mode: ON / OFF Resolution:When temperature is 0.1°, the resolution is -9.9~99.9, other temperature segment is 1° Control accuracy: 0.1 ° Hysteresis accuracy: 0.1° Refresh rate: 0.5S High temperature protection: 0-110° Supply voltage: DC 12V Static current: ≤ 35MA, attract current ≤ 65MA Output voltage: DC 12V Output power: 20A relay

Smart Electronics TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection

TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection

Raindrop sensor module/rain sensor/large area raindrop module

* Distribution bit to adjust sensitivity * A fixed bolt hole for easy installation * Power indicator, the output signal LED indicator * The comparator output, the signal is clean, waveform, driving ability over 15mA * Wide voltage LM393 comparator * A large area of rain board, more conducive to detect rain * Board with positioning holes to facilitate installation * Raindrops and control panels are separate, easy to wire leads

HC-SR501 Adjust IR Pyroelectric Infrared PIR Motion Sensor Detector Module

Automatic induction: When someone enters its induction range, enter the high level, people leave the sensor range is automatically delayed off high. Output low. 2. photosensitive control (optional): the module reserved for location, can be set to photosensitive control, strong light during the day or not induction. Photosensitive control is optional, the factory did not install photosensitive resistor. If necessary, please buy a separate photosensitive resistor to install.

Smart Electronics 4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board 14.4V 14.8V 16.8V BMS

4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board 14.4V 14.8V 16.8V BMS 1. Module name: 4 series lithium battery protection board 2. Modular nature: polymer lithium battery protection board 3. Overcharge detection voltage: 4.25 ± 0.025V 4. Overcharge release voltage: 4.15 ± 0.05V 5. Overdischarge detection voltage: 2.50 ± 0.08V 6. Over-discharge termination voltage: 3 ± 0.1V 7. Overcurrent: 20-30A

GY-906 MLX90614ESF infrared temperature sensor module

Module model: GY-906 Using IC: MLX90614 Power supply: 3-5v (internal low dropout voltage regulation) Communication method: standard IIC communication protocol Size: 11.5*16.5mm

0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface

Feature Size: 0.49 inch Dot matrix: 64*32 Monochrome: white, blue Hardware interface: I2C (14 feet) Driver chip: SSD1306/SH1106 Drive voltage: 3.3V Working temperature: -40℃-+70℃; Storage temperature: -40℃-+85℃; Product features: self-luminous, high brightness, high contrast, ultra-thin, full viewing angle, visible under sunlight, wide temperature, low power consumption, fast response speed

Smart Electronics TTGO T-Display ESP32 WiFi And Ble Module Development Board

TTGO T-Display ESP32 WiFi And Ble Module Development Board Chipset： ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH： QSPI flash 4MB SRAM： 520 kB SRAM Button： Reset USB to TTL： CP2104 Modular interface： UART,SPI,SDIO,I2C,LED PWM,TV PWM,I2S,IRGPIO,ADC,capacitor touch sensor,DACLNA pre-amplifier

Smart Electronics JDY-16 Ble 4.2 module high-speed transparent BLE support airsync iBeacon super CC2541

JDY-16 Ble 4.2 module high-speed transparent BLE support airsync iBeacon super CC2541 Feature No byte limit for serial port transmission and reception during transparent transmission Effective communication distance within 80 meters Working temperature: -40~+80 ℃ Communication rate 8k Bytes per second Support UART and IIC communication methods Working voltage: 1.8-3.3V

DIY Ble 5.0 Audio Receiver Module MP3 Ble Decoder Board Car Audio Speaker 4.1

Smart Electronics PAM8403 Wireless Stereo Audio Receiver Module For Digital Amplifier Sound Loud Board Micro USB BlUETOOTH 4.0 3W+3W

PAM8403 Wireless Stereo Audio Receiver Module For Digital Amplifier Sound Loud Board Micro USB BlUETOOTH 4.0 3W+3W 1. Working voltage: DC 5V 2. Output power: 3W+3W 3. Speaker type: 3W*2 4-8ohm 4. Mounting Hole: 3.0mm Features: Mini design, sound loud and clear, strong sense of hierarchy, ultra-small size, simple installation, wide application range, low prices, quality and stability

2x6W DC 5V 3.7V speaker modified Stereo Bluetooth amplifier board can connected lithium battery with charge management A8-020

100% Brand New Size: 7x4x0.7cm Conversion:1cm=0.39inch /1 inch =2.54cm

Smart Electronics LORA RFM95 RFM95W 868 915 RFM95-868MHz RFM95-915MHz SX1276 wireless transceiver module

LORA RFM95 RFM95W 868 915 RFM95-868MHz RFM95-915MHz SX1276 wireless transceiver module The RFM95 transceiver is a LoRaTM remote communication module, which provides ultra long distance spread spectrum communication and has super strong anti-interference capability and ultra low current consumption.

Smart Electronics Golden SW-520D Angle Sensor Module Ball Switch Vibration Switch Tilt Sensor Module

Module features: 1. Using high sensitivity angle switch SW-520D as the sensor 2. Comparator output, clean signal, good waveform, strong driving ability, exceeding 15mA. 3. Working voltage 3.3V-5V 4. Output form: Digital switch output (0 and 1) 5. Equipped with fixed bolt holes for easy installation 6. Small PCB size: 3.2cm x 1.4cm 7. Using a wide voltage LM393 comparator

TTL Turn RS485 Module 485 to Serial UART Level Mutual Conversion Hardware Automatic Flow Control Module

Product parameters: Operating voltage: compatible with 3.3V and 5.0V Support baud rate: 110-256000bps Operating temperature: -40 Celsius to +85 Celsius Communication signal: compatible with 3.3V and 5.0V

Smart Electronics AMG8833 Module GY- AMG8833 IR 8x8 Infrared Camera Array Temperature Sensor Module

AMG8833 Module GY- AMG8833 IR 8x8 Infrared Camera Array Temperature Sensor Module

High power three channel amplifier module TDA2050+TDA2030 2.1 subwoofer amplifier circuit board
Previous： Smart Electronics Level 3 Sensor Module with 25V Maximum Voltage Detector for Arduino
Next： Smart Electronics Pressure Temperature module The pressure sensor module replaces the BMP085 GY-68 BMP180
Return
TOP
86-755-83877216
smartbes
smartbes