Search

Smart Electronics Raindrop sensor module/rain sensor/large area raindrop module

Products > Module > Smart Electronics Raindrop sensor module/rain sensor/large area raindrop module
    • 1
    • 2
    • 3
    • 4
    • 5

Smart Electronics Raindrop sensor module/rain sensor/large area raindrop module

Raindrop sensor module/rain sensor/large area raindrop module

* Distribution bit to adjust sensitivity
* A fixed bolt hole for easy installation
* Power indicator, the output signal LED indicator
* The comparator output, the signal is clean, waveform, driving ability over 15mA
* Wide voltage LM393 comparator
* A large area of rain board, more conducive to detect rain
* Board with positioning holes to facilitate installation
* Raindrops and control panels are separate, easy to wire leads
shared：


* Product use: rain, rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO.
* The sensor USES the high quality FR - 04 double material, large area of 5.5 * 4.0 CM, treatment of nickel plating and surface,
  have fight oxidation, electrical conductivity, and life has more superior performance;
* The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 mA;
* The output format: digital switch output (0 and 1) and analog AO voltage output;
* The working voltage of 3.3 V to 5 V




Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

NRF52832 Low Power Ble 4.2 Module 2.4G Wireless Module BLE4.0 4.2 Module

16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685 DIY Servo Shield Module

Smart Electronics TTGO T-Display ESP32 WiFi And Ble Module Development Board

TTGO T-Display ESP32 WiFi And Ble Module Development Board Chipset： ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH： QSPI flash 4MB SRAM： 520 kB SRAM Button： Reset USB to TTL： CP2104 Modular interface： UART,SPI,SDIO,I2C,LED PWM,TV PWM,I2S,IRGPIO,ADC,capacitor touch sensor,DACLNA pre-amplifier

Smart Electronics Data transmission/transceiver/SI4432 industrial grade Wireless RF receiver cc1101 module

Data transmission transceiver SI4432 industrial grade Wireless RF receiver cc1101 module

Smart Electronics Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board

Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board This plate with switching function, SW short, will turn off the power amplifier Working Mode: Class D (PWM modulation type) Chip Type: PAM8610 Power Range: DC 6V-15V (self-protection) Recommended Voltage: DC 12V(2A) Output Power: 10Wx2(8Ω) 15Wx2(4Ω) Frequency Response: 20HZ-15KHZ Static Current: 20MA (DC12V) SNR: 90% Recommended Speakers: 10-100W Input Impedance: 15K Output Impedance: 4-8Ω Harmonic Distortion: <0.1% Size: Approx. 3cm x 2.5cm/ 1.19" x 0.98"

ACS712ELC-05B 5A range ACS712 module AC current sensor module

1. Current sensor chip: ACS712ELC-05B; 2. Pin 5V power supply, onboard power indicator; 3. The module can measure plus or minus 5A current, corresponding to the analog output 185mV/A; 4. When no detection current passes, the output voltage is VCC/2; 5. PCB board size: 31(mm)x13(mm);

Smart Electronics 8.29 Megapixel USB Camera Module 4K30 fps Industrial Camera IMX678 Modules

8.29 Megapixel USB Camera Module 4K30 fps Industrial Camera IMX678 Modules

Smart Electronics Industrial grade RS232 RS485 CAN to TTL communication module Serial port module CAN module

Industrial grade RS232 RS485 CAN to TTL communication module Serial port module CAN module

Smart Electronics DC-DC Step Up Converter Booster Power Supply Module Boost Step-up Board MAX output 28V 2A MT3608

DC-DC Step Up Converter Booster Power Supply Module Boost Step-up Board MAX output 28V 2A MT3608

Smart Electronics JDY-16 Ble 4.2 module high-speed transparent BLE support airsync iBeacon super CC2541

JDY-16 Ble 4.2 module high-speed transparent BLE support airsync iBeacon super CC2541 Feature No byte limit for serial port transmission and reception during transparent transmission Effective communication distance within 80 meters Working temperature: -40~+80 ℃ Communication rate 8k Bytes per second Support UART and IIC communication methods Working voltage: 1.8-3.3V

500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

Use precautions: 1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and ​negative do not pick wrong 2. Recommended power supply ±65V 3. Recommended 4-8Ω / 10-18inch speaker 4. Carefully check before electricity, ensure the wiring is correct.

Smart Electronics IR Infrared Sensor Module Slotted Optical Optocoupler Speed Measuring Sensor Module Motor Speed Detection Robot

IR Infrared Sensor Module Slotted Optical Optocoupler Speed Measuring Sensor Module Motor Speed Detection Robot

Smart Electronics ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

Smart Electronics Touch Button Module Capacitor Switch Sensor TTP223

Touch Button Module Capacitor Switch Sensor TTP223

MAX485 Module RS-485 TTL to RS485 MAX485CSA Converter Module

1 on-board MAX485 chip , is a tool for RS-485 communications , low-power , Slew-Rate Transceiver 2 onboard then 5.08 (mm) pitch 2P terminal for easy wiring RS-485 communication 3 the chip has drawn all of the pins can be controlled by the microcontroller operation 4 Working voltage : 5V 5 board size : 44 (mm) x14 (mm)

Smart Electronics HC-SR501 Adjust IR Pyroelectric Infrared PIR Motion Sensor Detector Module

HC-SR501 Adjust IR Pyroelectric Infrared PIR Motion Sensor Detector Module Automatic induction: When someone enters its induction range, enter the high level, people leave the sensor range is automatically delayed off high. Output low. 2. photosensitive control (optional): the module reserved for location, can be set to photosensitive control, strong light during the day or not induction. Photosensitive control is optional, the factory did not install photosensitive resistor. If necessary, please buy a separate photosensitive resistor to install.

Other Customization: Customized packaging(Min. Order: 20 Pieces) Trade Assuranceprotects your Alibaba.com orders Payments: Online Transfer Aliba

Main control chip: PIC16F877A (DIP40) Lead IO: All IO 2.54mm pin headers are taken out for convenient secondary development! Download interface: standard ICSP interface Crystal oscillator circuit: 4Mhz system crystal oscillator Voltage input: USB-5V input DV-5V input CR20123V backup battery Button LED: 1 power switch, 1 reset button, 4 independent buttons 4*4 matrix keyboard, 8 green LEDs, 1 buzzer

Smart Electronics CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

Smart Electronics Sound Detection Sensor Module Sound Sensor Vehicle

Sound Detection Sensor Module Sound Sensor Vehicle

Smart Electronics TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection

TP4056 18650 lithium battery module 3.7V 3.6V 4.2V lithium battery charging board 1A overvoltage protection
Previous： Smart Electronics Flame sensor module & infrared receiving module (3-wire system) ,Blue board
Next： Smart Electronics MQ135 MQ-135 Air Quality Detection Sensor
Return
TOP
86-755-83877216
smartbes
smartbes