Search

0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface

Products > LED/LCD Module > 0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface
    • 1
    • 2

0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface

Feature
Size: 0.49 inch
Dot matrix: 64*32
Monochrome: white, blue
Hardware interface: I2C (14 feet)
Driver chip: SSD1306/SH1106
Drive voltage: 3.3V
Working temperature: -40℃-+70℃;
Storage temperature: -40℃-+85℃;
Product features: self-luminous, high brightness, high contrast, ultra-thin, full viewing angle, visible under sunlight, wide temperature, low power consumption, fast response speed
shared：


Feature
Size: 0.49 inch Dot matrix: 64*32 Monochrome: white, blue Hardware interface: I2C (14 feet) Driver chip: SSD1306/SH1106 Drive voltage: 3.3V Working temperature: -40℃-+70℃; Storage temperature: -40℃-+85℃; Product features: self-luminous, high brightness, high contrast, ultra-thin, full viewing angle, visible under sunlight,
wide temperature, low power consumption, fast response speed




Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

TTL Turn RS485 Module 485 to Serial UART Level Mutual Conversion Hardware Automatic Flow Control Module

Product parameters: Operating voltage: compatible with 3.3V and 5.0V Support baud rate: 110-256000bps Operating temperature: -40 Celsius to +85 Celsius Communication signal: compatible with 3.3V and 5.0V

Rotating potentiometer knob cap Digital control module Rotary encoder module

Digital control module Rotary encoder module rotating potentiometer knob cap Working voltage: 5 v A circle of pulse count: 20 Rotary encoder through rotation direction and reverse direction can count is in the process of the number of output pulse, rotating counter unlike potentiometer, the rotation count there is no limit.Cooperate with the buttons on the rotary encoder, can be reset to the initial state, that is, from zero start counting.

Smart Electronics JDY08 Ble 4.0 BLE low-power CC2541 master-slave integrated airsync iBeacon Ble module

JDY08 Ble 4.0 BLE low-power CC2541 master-slave integrated airsync iBeacon Ble module Feature The JDY-08 transparent transmission module is based on the Bluetooth 4.0 protocol standard, with a working frequency range of 2.4GHz and a modulation method of GFSK. The maximum transmission power is 0dB and the maximum transmission distance is 80 meters. It adopts the TCC2541 chip design and supports users to modify device names, service UUID, transmission power, pairing passwords and other instructions through AT commands, making it convenient, fast, and flexible to use.

Sound sensor module voice control switch strength detection audio amplifier microphone LM386

The LM386 is an audio integrated power amplifier with its own low power consumption, adjustable gain for updating the internal chain, wide supply voltage range, fewer external components and less total harmonic distortion. It is mainly used in low-voltage consumer products. In order to minimize the peripheral components, the voltage gain is built-in as 20, and by adding an external resistor and capacitor between pin 1 and pin 8, the voltage gain can be adjusted to any value within 200.

Smart Electronics 360 Degrees Rotary Encoder Module Brick Sensor Switch Development KY-040

360 Degrees Rotary Encoder Module Brick Sensor Switch Development KY-040

Smart Electronics Cell Pack Module Original 3S 25A Li-ion 18650 BMS PCM Battery Protection Board With Balance For li-ion Lipo Battery

Cell Pack Module Original 3S 25A Li-ion 18650 BMS PCM Battery Protection Board With Balance For li-ion Lipo Battery

Original UNO R3 development board original single-chip C language programming learning motherboard kit

GY-906 MLX90614ESF infrared temperature sensor module

Module model: GY-906 Using IC: MLX90614 Power supply: 3-5v (internal low dropout voltage regulation) Communication method: standard IIC communication protocol Size: 11.5*16.5mm

Smart Electronics 4 channel 5V 12V 24V relay module with optocoupler low level trigger development board module

4 channel 5V 12V 24V relay module with optocoupler low level trigger development board module 5 V-12V to TTL control signal The control signal DC or AC, 220V AC load can be controlled. There is a normally open and one normally closed contact A power indicator light A control indicator, pull off, disconnect does not shine Transistor drive to increase the relay coil control pins high impedance. The control pin has a pull-down circuit to prevent malfunction relay vacant.

New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module

Temperature (Operation): -20°C to 70°C Temperature (Stable Image) : 0°C to 50°C Focus :Fixed Object distance:30CM-∞ Resolution: 800LW/PH (Center) Working power supply : 3.3v(pin15) Operating system: for Raspberry Pi Certifications :FCC and CE Sensor Type: OV5647 (1/4” ) Active Array Size : 2592*1944 Sensitivity: 600mV/Lux-sec F/No: 2.35 EFL: 1.55 mm BFL(Optical): 3.1mm FOV: 160° TV Distortion :<14.5% Relative Illumination (Sensor) : 70% IR Filter : 650±10nm

Smart Electronics Esp-32s esp-wroom-32 Wifi Blue-tooth Board Esp32 Development Board esp 32 wroom

Esp-32s esp-wroom-32 Wifi Blue-tooth Board Esp32 Development Board esp 32 wroom Product Optional WROOM-32 WROOM-32U WROOM-32D Neutral WROOM-32 WROOM-32E

GY-BME/BMP280 3.3V-5V temperature and humidity/atmospheric pressure sensor module

Smart Electronics ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module

ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleepcurrent and a minimum of 6mA. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.

Smart Electronics 5A DC to DC CC CV Lithium Battery Step down Charging Board Led Power Converter module XL4015

5A DC to DC CC CV Lithium Battery Step down Charging Board Led Power Converter module XL4015 Three in one: (1) Use as an ordinary step-down module with over-current protection capability; (2) Used as a charger for various voltage values of lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery pack), used in solar panels, wind turbines and other occasions; (3) Use as a high-power LED constant current drive module

PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply)

Product Name: pam8403 digital power amplifier board Specification and model: gf1002 Power supply range: 5V DC Minimum output: 3W * 2 Appearance size: 29.5 * 20.2 * 15mm (excluding protruding potentiometer rod)

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board Product Description: Input voltage: AC 100-240V 50/60HZ Output Voltage: DC 24V Output Current: 6-9A Output Power: 150W ( Max 220W ) Location Pore Size: 105.8 x 55.7mm Overall Dimensions: 115 x 65mm Ripple Noise: Less than 150MV Overcurrent protection: Yes Overload Protection: Yes Short circuit protection: Yes

Smart Electronics HW-658 USB Port GPS Module For Raspberry Pi

HW-658 USB Port GPS Module For Raspberry Pi Suitable For Raspberry Pi A B A+ B+ Zero 2 3. Connect via 1*8 2.54 separation distance pin header or USB micro data cable. Adopting L80-39 mould project, with 15 x 15 x 4mm Patch aerial. Super low power consumption, quick location. Support Short-circuit Protection and Aerial Detection. Support self-auxiliary AGPS (EASY technology), no need of external memory. Support LOCUS, DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN).

Smart Electronics JDY-08 blue tooth 4.0BLE low-power CC2541 master-slave integrated support airsync iBeacon module

JDY-08 blue tooth 4.0 BLE low-power CC2541 master-slave integrated support airsync iBeacon module

Universal Wireless Charging PCBA Coil Charging Pcb Circuit Board Qi Wireless charger receiver module

DC 30W adjustable booster module LM2587 outperforms the lm2577 in power 5A
Previous： Smart Electronics CC1101 Intelligent Industrial Wireless RF Communication Module SPI Transceiver Module 868MHz
Next： Smart Electronics DIY HIFI M18 Stereo Wireless 4.2 MP3 Audio Receiver board Module Decoder Board MH-M18
Return
TOP
86-755-83877216
smartbes
smartbes