Search

Resistive thin film pressure sensor comb type B structure flexible sensor

Products > Thin Film Pressure Sensor > Resistive thin film pressure sensor comb type B structure flexible sensor
    • 1
    • 2
    • 3

Resistive thin film pressure sensor comb type B structure flexible sensor

Terminal type

A2 male terminal
Female terminal
Female terminal plastic shell
A1 male terminal

Range

1kg small force
10Kg middle force
50kg vigorously
100g micro force
shared：


Resistive thin film pressure sensor-single point circular diameter
20mm comb type B structure flexible sensor 

Specification
Model: IMS-C20 Sensor type: single point Sensor shape: round Appearance diameter (width): 26mm Induction zone diameter: 20mm Sensor length: 126mm Wire length: 100mm Wire material width/spacing: silver/1.5mm/2.54mm Sensor thickness: ≤0.25mm Range: 50g/cm2-100kg/cm2 Terminal type: no terminal/male terminal/female terminal/terminal shell Typical application performance Power supply: Type+5V, Type 5ma(Max) Sensor type: Piezoresistive Service life: ≥100000 times Linearity error: ≤±3% Repeatability: full scale≤±2.5% Hysteresis: full scale≤±4.5% Drift: ≤5%/logarithmic time range Response time: ≤5uS Operating temperature range: -40°C-60°C Temperature drift: ≤0.2%℃

Opotions


Terminal type

A2 male terminal Female terminal Female terminal plastic shell A1 male terminal

Range

1kg small force 10Kg middle force 50kg vigorously 100g micro force

Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original

SHT1x - Digital Temperature and Humidity Sensor (RH/T) SHT1x series SHT10 - low cost version, ±4.5% RH accuracy SHT11 - standard version, ±3% RH accuracy SHT15 - high-end version, ±2% RH accuracy

MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000

●Support 100Ω to 1kΩ (at 0°C) platinum resistance RTD (PT100 to PT1000) ●Conversion time: 21ms (maximum) ●15-bit ADC resolution; nominal temperature resolution is 0.03125°C (non-linear change with RTD) ● Under the whole working conditions, the total accuracy is maintained at 0.5°C (0.05% full range) ● SPI compatible interface, compatible with 2-wire, 3-wire and 4-wire sensor connection

Costom steel tube threades sleeve stainless steel temperature sensor NTC thermostat probe

Costom steel tube threades sleeve stainless steel temperature sensor NTC thermostat probe

High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor

Film pressure sensor is piezoresistive, also known as resistive, equivalent to varistor in the circuit. When the sensor has no external load, the circuit is in high resistance state (generally greater than 2m Ω). When the external pressure is applied to the sensor, the circuit resistance will decrease (tens of K Ω or less). With a multimeter, the resistance value can be read directly by connecting to two external terminals. The resistance value changes with the change of external pressure. The voltage is inversely proportional to the resistance, while the voltage カ is linearly related to the conductivity, so the pressure change can be inversely deduced according to the conductivity change.

SHTC1 humidity and temperature sensor temperature sensor for agricultural

Datasheet SHTC1 Humidity and Temperature Sensor IC Best performance-to-price ratio Fully calibrated and reflow solderable Ultra-low power consumption Power-up and measurement within 1 ms 1.8 V supply voltage Ultra-small DFN package : 2 x 2 x0 . 75 mm³ Typical accuracy : ± 3% RH and + 0.3 ºC

M12 proximity switch sensor LJ12A3-4-Z/BX/BY/AX/AY/EX/DX/EZ/DZ normally open 24V

Current specification: 300mA Rated working voltage: DC: 6-36V Distance measurement: 4mm±10% Output mode: NPN NO (normally open) Level signal: low level Installation method: non-embedded Thread diameter: M12X1 Shell material: brass nickel plated Wire length: 1.2 meters

Smart Electronics High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

High Accuracy Temperature Components NTC Thermistor Epoxy Resin 5k 10k 20k 50k 100k temperature sensor cable

Smart Electronics Ozone gas sensor module ZE25-O3

Ozone gas sensor module ZE25-O3 The ZE25-O3 electrochemical ozone module is a general-purpose, compact module. The electrochemical principle is used to detect the ozone gas present in the air, which has good selectivity and stability. Built-in temperature sensor for temperature compensation; digital output and analog voltage output for easy use. ZE25-O3 is a universal gas module designed and manufactured by combining sophisticated electrochemical detection technology with sophisticated circuit design.

Smart Electronics Hall effect sensor ss49e 49e hall element oh49e

Hall effect sensor ss49e 49e hall element oh49e The 49E is a Hall-effect integrated circuit. The output voltage changes with the change of the magnetic flux density, and it can detect the slight change of the magnetic field. It can be used to measure the motion of objects, distance, position sensor, etc. It is alsosuitable for use in harsh environments or heavily polluted conditions.

Smart Electronics E-bike Accessories Brushless Electric Motor Hall Sensor 3144 Circuit Board 41F 43F with Wire

E-bike Accessories Brushless Electric Motor Hall Sensor 3144 Circuit Board 41F 43F with Wire Product Categories (please choose the one you need) 1. Two-wheeled 13A 120 degrees 2. Two-wheeled 413 120 degrees 3. Two-wheeled 41F 120 degrees 4. Two-wheeled 43F 120 degrees 5. Two-wheeled 3144 120 degrees 6. Two-wheeled 13A 60 degrees 7. Two-wheeled 413 60 degrees 8. Two-wheeled 41F 60 degrees 9. Two-wheeled 43F 60 degrees 10.Two-wheeled 3144 60 degrees

Force Sensor RP-C18.3-ST Flexible Thin Film Pressure Sensor Intelligent 20g-6kg

The flexible sensor has the characteristics of flexible ultra-thin, ultra-low power consumption and extreme speed response, etc. Small size, this flexible pressure sensor is based on new nanometer pressure-sensitive materials ​supplemented by ultra-thin film substrate. This pressure sensor has the characteristic of high stability, high consistency. Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.

Smart Electronics DHT11 module digital temperature and humidity sensor dht-11 electronic building block

DHT11 module digital temperature and humidity sensor dht-11 electronic building block (37 in one) Product parameters: 1. Power supply voltage: 5V 2. Temperature error: 0-50℃ 3. Humidity range: 20-90%RH

Industrial-grade MINI I2C interface High-precision Si7021 temperature and humidity sensor

Working voltage: 1.9-3.6V (3.3V recommended) Standby current: 60nA Temperature range: -40-85°C (recommended -10-60°C) Temperature accuracy: ±0.4℃ (-10-85℃) Humidity range: 0-RH (20%-80%RH recommended) Humidity accuracy: ±3%RH (0-80%RH) Temperature conversion time: 7ms Humidity conversion time: 17ms (temperature conversion will be performed automatically when humidity conversion is performed) Interface type: I2C 2.54mm pitch pad Module size: 8.5X10mm

Smart Electronics Stainless steel temperature sensor probes

Stainless steel temperature sensor probes

FSR402 Force Sensing Resistor Long Tail Resistance-type Thin Film Pressure Sensor

Specification Sensing Area: 1.27cm / 0.5" Output Signal: Passive variable resistance Force Sensing Range: 0g~10kg Length: 6cm / 2.36" Width: 1.9cm / 0.75" Welcome to your kindly inquiry : )

FSR406 Pressure Sensor , 100% New and Original Force Sensitive Resistor

This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

DHT22 digital temperature and humidity sensor AM2302 temperature humidity module

Technical parameter Measuring range Temperature: -40….+80°℃ Humidity: 0...99.9%RH

Infrared temperature measurement sensor MLX90614ESF-BAA for infrared forehead thermometer

Product category: temperature sensor mounted on board Output type: Digital Configuration: Remote Accuracy: +/- 0.5 C Power supply voltage-minimum: 2.6 V Power supply voltage-maximum: 3.6 V Interface type: 2-Wire Resolution: 10 bit Minimum operating temperature:-40° C Maximum operating temperature: +85 °C Installation style: Through Hole Package / Box: TO-39-4 Package: Tube Temperature threshold: +380 °C Working power supply current: 1.3 mA Unit weight: 2 g

Smart Electronics MQ-9 carbon monoxide Combustible gas sensor alarm module

MQ-9 carbon monoxide Combustible gas sensor alarm module Feature: Size: 32mm * 22mm * 27mm Main chip: LM393, MQ-9 gas sensors Working voltage: DC 5 V Characteristics: 1, having a signal output instruction. 2, dual signal output (analog output, and TTL level output) 3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller) 4, 0 - 5V analog output voltage, the higher the concentration the higher the voltage. 5, for CO, gas, liquefied petroleum gas with high sensitivity and good selectivity. 6, has a long life and reliable stability 7, rapid response and recovery characteristics Application: MQ-9 sensor main family, environmental detection of carbon monoxide gas for CO, gas, liquefied petroleum gas field testing;
Previous： FSR406 Pressure Sensor , 100% New and Original Force Sensitive Resistor
Next： Thin film pressure sensor, Square 16 nodes side length 20 mm flexible resistive motion sensor
Return
TOP
86-755-83877216
smartbes
smartbes