Search

Customized 304 capillary tube/stainless steel seamless pipe, hollow round tube

Products > Customized 304 capillary tube/stainless steel seamless pipe, hollow round tube
    • 1
    • 2
    • 3
    • 4

Customized 304 capillary tube/stainless steel seamless pipe, hollow round tube

shared：

Customized 304 capillary tube/stainless steel seamless pipe, hollow round tube
Specifications:
Wall thickness 2/3/4/5/6/7/8/9mm
OverviewOur company can accept capillary cutting processing business, the length error is within 0.5mm, and
the incision is free of burrs. Please ask the salesperson for specific cutting costs. There are nearly a thousand specifications, so there is no specification option. If you need an inquiry, please inform
our salesperson of the specifications you need. Complete capillary specifications! Quality assurance! Rich inventory!Note:

Due to the particularity of this product, it is cut at the customer's request. If there is no quality problem,
we will not accept return or exchange. Thank you for your understanding.

The capillary tube in our shop is polished on the outside, slippery on the inside but not bright! Both the outer diameter and inner diameter have positive and negative tolerances!
Buyers with high requirements should buy carefully!
Diameter

Our capillary unit is millimeter. 1 cm = 10 mm, for example, if you need an outer diameter of 1 cm
and an inner diameter of 0.7 cm, that is 10 (outer diameter) * 1.5 (wall thickness).
The outer diameter minus 2 wall thickness is the inner hole!
About Customization:

Support customized NTC wire, NTC probe and steel tube with short delivery time, quality assurance, and affordable prices.

Welcome to your kindly inquiry : )
Shipping
Thank you for all your supports !  Welcome to contact us .


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics TGS822 TGS 822 alcohol gas sensor

TGS822 TGS 822 alcohol gas sensor Parameters: Alcohol measurement range: 50-5,000ppm Sensitivity (resistance ratio): 0.40 ± 0.1 Circuit voltage: 24V (DC/AC) Heater voltage: 5V±0.2V(AC/DC)

Smart Electronics MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000

MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000 ●Support 100Ω to 1kΩ (at 0°C) platinum resistance RTD MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000 (PT100 to PT1000) ●Conversion time: 21ms (maximum) ●15-bit ADC resolution; nominal temperature resolution is 0.03125°C (non-linear change with RTD) ● Under the whole working conditions, the total accuracy is maintained at 0.5°C (0.05% full range) ● SPI compatible interface, compatible with 2-wire, 3-wire and 4-wire sensor connection

Smart Electronics Thin film pressure sensor resistive force sensitive and pressure sensitive plantar flexible PVDF robot tactile FSR402 406

Thin film pressure sensor resistive force sensitive and pressure sensitive plantar flexible PVDF robot tactile FSR402 406

Smart Electronics Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136

Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136 The gas-sensitive material used in the MQ136 hydrogen sulfide gas sensor is tin dioxide (SnO2) with low conductivity in clean air. When there is hydrogen sulfide gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of hydrogen sulfide gas in the air increases. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration.

Costom steel tube threades sleeve stainless steel temperature sensor NTC thermostat probe

Costom steel tube threades sleeve stainless steel temperature sensor NTC thermostat probe

Smart Electronics High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor

High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor Film pressure sensor is piezoresistive, also known as resistive, equivalent to varistor in the circuit. When the sensor has no external load, the circuit is in high resistance state (generally greater than 2m Ω). When the external pressure is applied to the sensor, the circuit resistance will decrease (tens of K Ω or less). With a multimeter, the resistance value can be read directly by connecting to two external terminals. The resistance value changes with the change of external pressure. The voltage is inversely proportional to the resistance, while the voltage カ is linearly related to the conductivity, so the pressure change can be inversely deduced according to the conductivity change.

Smart Electronics Original imported flexiforce film pressure sensor A301 1/25/100lbs

Original imported flexiforce film pressure sensor A301 1/25/100lbs The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications. The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb). The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.

Smart Electronics SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original

SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original SHT1x - Digital Temperature and Humidity Sensor (RH/T) SHT1x series SHT10 - low cost version, ±4.5% RH accuracy SHT11 - standard version, ±3% RH accuracy SHT15 - high-end version, ±2% RH accuracy

Smart Electronics Thin film pressure sensor, Square 16 nodes side length 20 mm flexible resistive motion sensor

Thin film pressure sensor, Square 16 nodes side length 20 mm flexible resistive motion sensor The IMM0092 of Idong Film Electronics is a member of the single-node sensor family. Although IMM092 has 16 nodes, because IMM00092 has 32 lines of output, each node has 2 lines of output, and the 16 nodes are independent of each other. They are very reliable piezoresistive sensors. When the pressure (pressure) applied to the effective area of the sensor increases, the output resistance of the sensor decreases. Single-point sensors can be measured using a multimeter or customer's own circuit.

Smart Electronics Thin Film Pressure Sensor DF9-40 High Precise Force Sensing Resistor Resistance-type Flexible Pressure Sensor

Thin Film Pressure Sensor DF9-40 High Precise Force Sensing Resistor Resistance-type Flexible Pressure Sensor This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate. Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure. It has pressure sensitive function as well as water-resistant function. When sensor detects outside pressure, the resistance of sensor will change. Pressure signal can be converted into a corresponding electrical signal output using simple circuit.

Smart Electronics NTC Probe for immersion sensor custom steel tube 50mm

NTC Probe for immersion sensor custom steel tube 50mm 1.sensor well for immersion sensor , custom steel tubes 50mm G1/2 legth 56mm 2.sensor well for immersion sensor custom steel tubes 80mm G1/2 legth 86mm

Electronics Customized SS 304 Stainless steel pipe double ferrule compression connector tube

Smart Electronics Stainless steel fixed thread temperature sensor Kt100 RTD / E-type thermocouple waterproof temperature measurement wire probe

Stainless steel fixed thread temperature sensor Kt100 RTD / E-type thermocouple waterproof temperature measurement wire probe

Smart Electronics MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element

MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element Product model: MQ135 Product Type: Semiconductor gas sensor Standard package: Bakelite (Black Bakelite) Detection gas: ammonia, sulfide, benzene vapor Detection concentration: 10-1000ppm (ammonia, toluene, hydrogen) Standard circuit conditions Loop voltage Vc: ≤24VDC Heating voltage VH: 5.0V±0.2 V ACORDC Load resistance RL: adjustable

Smart Electronics Thin film pressure sensor-single point circular diameter 4 mm flexible resistive FSR

IMS054-C04A (IMS-C04A) is a member of the single-node sensor family. They are all very reliable piezoresistive sensors, using A structure with double-sided silver electrodes. When the pressure (pressure) applied to the effective area of the sensor increases, the output resistance of the sensor decreases, and the single-point sensor can be measured with a multimeter or the customer's own circuit

Smart Electronics LJ12A3-4-Z/BY Inductive Proximity Sensor Switch 4mm Detection PNP DC6-36V NO Normally Open

LJ12A3-4-Z/BY Inductive Proximity Sensor Switch 4mm Detection PNP DC6-36V NO Normally Open

Smart Electronics Duct type temperature and humidity sensor housing

Duct type temperature and humidity sensor housing 1. Copper sintered dust cover 2. Stainless steel lock wire seat 3. Good air permeability 4. Widely applicable 5. High cost performance

Smart Electronics DHT90 SHT10 Digital temperature and humidity sensor with pin SHT10 Digital Humidity & Temperature Sensor

DHT90 SHT10 Digital temperature and humidity sensor with pin SHT10 Digital Humidity & Temperature Sensor

Smart Electronics Ozone gas sensor module ZE25-O3

Ozone gas sensor module ZE25-O3 The ZE25-O3 electrochemical ozone module is a general-purpose, compact module. The electrochemical principle is used to detect the ozone gas present in the air, which has good selectivity and stability. Built-in temperature sensor for temperature compensation; digital output and analog voltage output for easy use. ZE25-O3 is a universal gas module designed and manufactured by combining sophisticated electrochemical detection technology with sophisticated circuit design.

Smart Electronics MQ-9 carbon monoxide Combustible gas sensor alarm module

MQ-9 carbon monoxide Combustible gas sensor alarm module Feature: Size: 32mm * 22mm * 27mm Main chip: LM393, MQ-9 gas sensors Working voltage: DC 5 V Characteristics: 1, having a signal output instruction. 2, dual signal output (analog output, and TTL level output) 3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller) 4, 0 - 5V analog output voltage, the higher the concentration the higher the voltage. 5, for CO, gas, liquefied petroleum gas with high sensitivity and good selectivity. 6, has a long life and reliable stability 7, rapid response and recovery characteristics Application: MQ-9 sensor main family, environmental detection of carbon monoxide gas for CO, gas, liquefied petroleum gas field testing;
Previous： Electronics Customized SS 304 Stainless steel pipe double ferrule compression connector tube
Next： Smart Electronics 3535/2835/3030 can bend double-sided aluminum substrate, flexible aluminum pcb, 3535 led pcb
Return
TOP
86-755-83877216
smartbes
smartbes