Search

Smart Electronics 0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)

Products > LED/LCD Module > Smart Electronics 0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)
    • 1
    • 2
    • 3

Smart Electronics 0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)

shared：
0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)
Type
oled
Display Size
0.49 inch
Product Name
049 inch OLED monochrome display screen
Resolution
64 * 32
Working voltage
3.3V
Control chip
SSD1306
Display area
11.18 * 5.58 (mm)
Panel size
26.70*19.26*14 (mm)
Pixel spacing
0.175 * 0.175 (mm)
Pixel size
0.155 * 0.155 (mm)
Number of pins
14in (welded 14pin, 0.7mm spacing)
Working temperature
-40~85 °C
Perspective direction
full view
Interface type
 IIC interface


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics QC2.0 QC3.0 Quick Charging USB Mobile Phone Charging Board DC Step-down Module

QC2.0 QC3.0 Quick Charging USB Mobile Phone Charging Board DC Step-down Module

Smart Electronics Relay Module For ARM PIC AVR DSP 10A 5V 2 Channel Relay Module Shield

Relay Module For ARM PIC AVR DSP 10A 5V 2 Channel Relay Module Shield Specifications : Size: 3.9cm x 5.1cm Materials: PCB board and electronic components Package included : 1 x 5V 2-Channel Relay Module Shield

Smart Electronics TPA3116D2 high power /HIFI digital 2.1 power amplifier board 10-25V

TPA3116D2 high power /HIFI digital 2.1 power amplifier board 10-25V Product Name: high power digital 2.1 power amplifier board Chip type: tpa3116d2 * 2 Input voltage: dc10-25v (DC) Output power: 50wx2 + 100wxi Max Channel: dual channel + 0.1 subwoofer Output impedance: 4-8 Ω Frequency response 20Hz-20KHz Protection function: short circuit overheat power supply anti reverse connection Switching frequency: 1.2MHz Features: power on delay / anti shock Size: about 88 * 66 * 27.6m Net weight: about 105g

Smart Electronics 43A current limiting control semiconductor refrigeration driven high-power intelligent vehicle motor drive module BTS7960

43A current limiting control semiconductor refrigeration driven high-power intelligent vehicle motor drive module BTS7960

Smart Electronics Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense

Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense Raspberry Pi Sense HAT provides power and data connectivity via the Raspberry Pi motherboard 40Pin GPIO interface. To create the "Astro Pi", the Sense HAT sensor module integrates common sensors, making it usable in a variety of different types of experiments, applications, and even It is a game.

Smart Electronics STM32F103C8T6 ARM STM32 Minimum System Development Board Module

STM32F103C8T6 ARM STM32 Minimum System Development Board Module CH32F103C8T6 chip is compatible with STM32F103C8T6 series chips, all pins are compatible, all registers are compatible.

Smart Electronics ACS712ELC-05B 5A range ACS712 module AC current sensor module

ACS712ELC-05B 5A range ACS712 module AC current sensor module 1. Current sensor chip: ACS712ELC-05B; 2. Pin 5V power supply, onboard power indicator; 3. The module can measure plus or minus 5A current, corresponding to the analog output 185mV/A; 4. When no detection current passes, the output voltage is VCC/2; 5. PCB board size: 31(mm)x13(mm);

Smart Electronics ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module

ESP32-CAM WiFi WiFi Module ESP32 serial to WiFi ESP32 CAM Development Board 5V Bluetooth with Camera Module The ESP32-CAM has a very competitive small-size camera module that can operate independently as a minimum system, measuring only 27*40.5*4.5mm, with deep sleepcurrent and a minimum of 6mA. ESP-32CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.

Smart Electronics 5A DC to DC CC CV Lithium Battery Step down Charging Board Led Power Converter module XL4015

5A DC to DC CC CV Lithium Battery Step down Charging Board Led Power Converter module XL4015 Three in one: (1) Use as an ordinary step-down module with over-current protection capability; (2) Used as a charger for various voltage values of lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery pack), used in solar panels, wind turbines and other occasions; (3) Use as a high-power LED constant current drive module

DC 30W adjustable booster module LM2587 outperforms the lm2577 in power 5A

Smart Electronics LNA 50-4000 MHz RF SPF5189 NF 0.6dB Low Noise Amplifier Signal Receiver Board Wireless Communication Module With Shield Shell

LNA 50-4000 MHz RF SPF5189 NF 0.6dB Low Noise Amplifier Signal Receiver Board Wireless Communication Module With Shield Shell Specifications: LNA: 50-4000mhz NF: SPF5189Z LNA0: 0.6 dB Amplifier: FM Size: 34 x 25mm/1.33 x1.0inch

Smart Electronics 74HC595 driver 8-digit digital tube display module

74HC595 driver 8-digit digital tube display module 1. Two 595 digital tubes are used to drive the digital tube, which needs 3 IO ports of single chip microcomputer, and it is displayed according to the principle of dynamic scanning of digital tube; 2. wide working voltage 3.3V to 5V; 3. PCB size: 71mm * 22mm 4. digital tube model: 0.364 bits

Smart Electronics Android electronic building block waterproof DS18B20 temperature sensor module kit

Android electronic building block waterproof DS18B20 temperature sensor module kit

L298N motor driver board module intelligent vehicle robot accessory H-bridge drive stepper motor driver

Smart Electronics 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module Use precautions: 1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and ​negative do not pick wrong 2. Recommended power supply ±65V 3. Recommended 4-8Ω / 10-18inch speaker 4. Carefully check before electricity, ensure the wiring is correct.

Smart Electronics USB Power Bank Charger Circuit Board Step Up Boost Power Module + 5S 18650 Li-ion Case Shell DIY Kit Powerbank

USB Power Bank Charger Circuit Board Step Up Boost Power Module + 5S 18650 Li-ion Case Shell DIY Kit Powerbank 1.Aplly Battery Type:18650 battery(not include) 2.Output Voltage: 5V 2.1A 3.Input Voltage: 5V1A 4.Instructions: Level 4 Capacity indicator 5.Lighting: with LED lights 6.Size: 140 * 64 * 22mm 7.Rated Voltage : 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)

Smart Electronics 100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V

100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V Operating voltage: Dual DC 10 - 45V recommended Dual DC 35V Rated output power :100W(4 Ohm ± 35V) Maximum output power : 150W (4 Ohm ± 45V) enormous heat, is not recommended PCB size :30 x 50 x 35mm Pitch : 5.08mm Hole distance between two power tube : 47mm

Smart Electronics TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories

TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories The module is a capacitive touch switch module based on touch detection IC (ttp223b). Under normal condition,the module outputs low level and the mode is low power consumption mode; when touching the corresponding position with fingers, the module outputs high level and the mode switches to fast mode; when there is no touch for 12 seconds, the mode switches to low power consumption mode.

XL 6009 DC to DC Step Up Converter xl6009 step-up power module dc motor

This DC-DC Module is based on IC XL6009E1 which is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip that offers superior performance over the first generation technology LM2577. XL6009 replaces LM2577 module as LM2577 is about to be phased out.
Previous： Smart Electronics DUE R3 Development Board ARM32-bit Master Control Immersion Gold Technology Development Board Module
Next： Smart Electronics Mini Ble Audio Receiver Amplifier Board Module With Stereo Speakers
Return
TOP
86-755-83877216
smartbes
smartbes