Search

Smart Electronics 3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486

Products > LED/LCD Module > Smart Electronics 3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486
    • 1
    • 2
    • 3

Smart Electronics 3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486

3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486

100% brand new and high quality
Features:
Vivid TFT Display in 65K Color.
Touch Panel Selected.
SPI Interface, 4 IOs only.
With SD Card Extended (Except 1.44").
Module Display Screen only, other accessories demo in the picture is not included.
shared：


100% brand new and high quality
Features:
Vivid TFT Display in 65K Color.
Touch Panel Selected.
SPI Interface, 4 IOs only.
With SD Card Extended (Except 1.44").
Module Display Screen only, other accessories demo in the picture is not included.
 
Specification:
Size: 5.5 x 9.8cm(2.17 x  3.86in)
 
Electrical Parameters:
Screen Size: 3.5inch
Type: TFT
Driver IC: ILI9488
Resolution: 480 x 320(Pixel)
Module Port: 4-Wire SPI Interface
Effective Display Area(AA): 48.96 X 73.44mm
Mudule PCB Baseboard Size: 56.34 x 98mm
VCC Voltage: 3.3V-5V
Logic IO Voltage: 3.3V(TTL)
Power: 90mA
 
Note:
1. No retail package.
2. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3. Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Thank you!



Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board Product Description: Input voltage: AC 100-240V 50/60HZ Output Voltage: DC 24V Output Current: 6-9A Output Power: 150W ( Max 220W ) Location Pore Size: 105.8 x 55.7mm Overall Dimensions: 115 x 65mm Ripple Noise: Less than 150MV Overcurrent protection: Yes Overload Protection: Yes Short circuit protection: Yes

Smart Electronics TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB

TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB Model: TDA7293/TDA7294 Power supply: double AC 15V to 36V (AC needs rectification and filtering) or DC positive and negative 18V to 50V.Recommended double 35V (Note that it is not a dual 35V transformer, it is positive and negative 35V DC. And It is recommended to double 26V/200W toroidal transformer, after rectification voltage is about DC double 35V).

Smart Electronics Dual coil fast wireless charger transmitter module PCBA board + 2 coil general qi standard diy board

Dual coil fast wireless charger transmitter module PCBA board + 2 coil general qi standard diy board Product Parameters 1. Input power supply: 5V 2A or 9V 1.67-2a, output: 5V 1A or 9V 1.2A 2. Product weight: 0.035kg 3. Charging power: 5W / 7.5w/10w automatic identification 4. Transmission distance: 2-8mm 5. Executive standard: Qi wireless charging standard 6. Product certification: CE / FCC / RoHS

Smart Electronics KY-013 3PIN Analog temperature sensor module KY-013

KY-013 3PIN Analog temperature sensor module KY-013

Smart Electronics 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board For 14.8V 16.8V Lipo Cell Module

4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board For 14.8V 16.8V Lipo Cell Module 4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery) Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery) Product Size: 45 * 55 * 3.4mm (Standard Edition / Enhanced), 46 * 60 * 3.4mm (balanced version) Product weight: 9.3g (standard / enhanced version), 10.3g (balanced version) Charging voltage: 16.8V - 18.1V

Smart Electronics Power Supply for Raspberry Pi 3, Raspberry Pi Pro V1.1 UPS HAT I2C Lithium Battery Expansion Board

Power Supply for Raspberry Pi 3, Raspberry Pi Pro V1.1 UPS HAT I2C Lithium Battery Expansion Board This is a power expansion Board especially designed for Raspberry Pi, which enables to use the Raspberry Pi with a moveable power source. It's more convenient to use external 3.7V Lithium battery or 3.7V 18650 Lithium battery;

Smart Electronics HC-SR312 Human body sensing infrared sensor PIR infrared module HC-SR312

HC-SR312 Human body sensing infrared sensor PIR infrared module HC-SR312

Smart Electronics DC 5V & DC12V ESP8266 WIFI 4-Channel Relay Module IoT Wireless Transmitter

DC 5V & DC12V ESP8266 WIFI 4-Channel Relay Module IoT Wireless Transmitter ESP8266 WIFI 4-Channel Relay Module is 4 channel WIFI relay module carried a ESP8266 WIFI module and mature 8 bit MCU, with Professional switching power supply circuit.It could control the relay by Android phone APP within the local area network (LAN).It is easy to set .

XL 6009 DC to DC Step Up Converter xl6009 step-up power module dc motor

This DC-DC Module is based on IC XL6009E1 which is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip that offers superior performance over the first generation technology LM2577. XL6009 replaces LM2577 module as LM2577 is about to be phased out.

Smart Electronics 3pin PCB DIY Starter Kit KY-015 DHT11 Digital Temperature Relative Humidity Sensor Module DHT11

3pin PCB DIY Starter Kit KY-015 DHT11 Digital Temperature Relative Humidity Sensor Module DHT11

Smart Electronics Long Range Rfid 134.2 KHZ Reader module RDM660 Writer Transceivers

Long Range Rfid 134.2 KHZ Reader module RDM660 Writer Transceivers

Smart Electronics HC-42 Ble module BLE5.0 master-slave integration nRF52832 wireless serial communication ibeacon

HC-42 Ble module BLE5.0 master-slave integration nRF52832 wireless serial communication ibeacon Module Name: HC-42 Working frequency band: 24G Communication interface: UART Shutdown current: 0.3uA Communication level: 1.8-3.6V Transmission power: -40-4dBm Communication distance: 40m/2Mbps (Bluetooth 5.0) Antenna interface: built-in PCB antenna Receiving sensitivity: -96dbm@1Mbps Air speed: 1mbps/2mbps Working humidity: 10% -90% Storage temperature: -40 ° C~85 ° C Working temperature: -25 ° C -75 ° C

Smart Electronics TTGO T-Display ESP32 WiFi And Ble Module Development Board

TTGO T-Display ESP32 WiFi And Ble Module Development Board Chipset： ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH： QSPI flash 4MB SRAM： 520 kB SRAM Button： Reset USB to TTL： CP2104 Modular interface： UART,SPI,SDIO,I2C,LED PWM,TV PWM,I2S,IRGPIO,ADC,capacitor touch sensor,DACLNA pre-amplifier

Smart Electronics 16 channel relay module 5v power supply control board module 5V12V with optocoupler protection LM2596

16 channel relay module 5v power supply control board module 5V12V with optocoupler protection LM2596

Smart Electronics JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module

JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module Model: JDY-23 Working frequency band: 2.4G Transmission power: 4dB (maximum) Communication interface: UART Working voltage: 1.8-3.6V Working temperature: -40 ℃ -80 ℃ Antenna: Built in PCB antenna Receiving sensitivity: -97dbm Transmission distance: 60 meters Master Slave Support: Slave Module size: 19.6 * 14.94 * 18mm (length, width, height) Bluetooth version: BLE5.0 (also includes BLE4.0 and BLE4.2) Wake up current: 800uA (with broadcast) Shallow sleep current:<50uA (with broadcast) Command parameters: Save parameter configuration, power-off data saved SMT welding temperature:<260 ℃ RF TX/RX peak current: 5mA

Smart Electronics Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense

Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense Raspberry Pi Sense HAT provides power and data connectivity via the Raspberry Pi motherboard 40Pin GPIO interface. To create the "Astro Pi", the Sense HAT sensor module integrates common sensors, making it usable in a variety of different types of experiments, applications, and even It is a game.

Smart Electronics Industrial grade RS232 RS485 CAN to TTL communication module Serial port module CAN module

Industrial grade RS232 RS485 CAN to TTL communication module Serial port module CAN module

Smart Electronics MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000

MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000 ●Support 100Ω to 1kΩ (at 0°C) platinum resistance RTD MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000 (PT100 to PT1000) ●Conversion time: 21ms (maximum) ●15-bit ADC resolution; nominal temperature resolution is 0.03125°C (non-linear change with RTD) ● Under the whole working conditions, the total accuracy is maintained at 0.5°C (0.05% full range) ● SPI compatible interface, compatible with 2-wire, 3-wire and 4-wire sensor connection

SIM900A module, development board, GSM/GPRS/STM32 \ super TC35i wireless data transmission module

Product Description: ardu 51 STM32 AVR MCU compatible Prototype expand The dual frequency 900/ 1800 MHz, GPRS multi-slot class 10/8,GPRS mobile station class B Power supply range: voltage is 4.6-5.2v; current is 1A or more(the current is very important). Low power consume: 1.5mA (sleep mode) Operating temperature range: -40 degrees C to +85 C Communication interface: The TTL level serial interface compatible 2.85 3.3 5v MCU Size:49*50mm
Previous： Smart Electronics DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module
Next： Smart Electronics HUB USB expansion board USB HUBS splitter expansion module suitable for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+/zero/w
Return
TOP
86-755-83877216
smartbes
smartbes