Search

Smart Electronics 1000W ZVS Carbon Steel Flyback Driver Low Voltage Stable Induction Heating Board Module Plate

Products > Module > Smart Electronics 1000W ZVS Carbon Steel Flyback Driver Low Voltage Stable Induction Heating Board Module Plate
    • 1
    • 2
    • 3

Smart Electronics 1000W ZVS Carbon Steel Flyback Driver Low Voltage Stable Induction Heating Board Module Plate

1000W ZVS Carbon Steel Flyback Driver Low Voltage Stable Induction Heating Board Module Plate

100% brand new and high quality!
This section of induction heating using low-voltage DC power supply 12-48V.
Maximum current 20A, maximum power 1000W.
Can be used for DIY players to heat treatment of small parts such as quenching, annealing, etc.
Can directly heat iron, carbon steel, graphite, titanium alloy and other materials.
Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.
shared：

100% brand new and high quality!
This section of induction heating using low-voltage DC power supply 12-48V.
Maximum current 20A, maximum power 1000W.
Can be used for DIY players to heat treatment of small parts such as quenching, annealing, etc.
Can directly heat iron, carbon steel, graphite, titanium alloy and other materials.
Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.

Specification:

MaterialElectronic component
ColorAs shown
SizeAbout 115*110mm
Inside diameter of the coilAbout 40mm
Height of the coilAbout 50mm
Voltage12-48V
Maximum current20A
Maximum power1000W



Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics CH341 24 25 Series EEPROM Flash BIOS USB Programmer with Software & Driver

CH341 24 25 Series EEPROM Flash BIOS USB Programmer with Software & Driver

Smart Electronics JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module

JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module Model: JDY-34 Antenna type: PCB board mounted antenna Working frequency band: 2.4G Transmission power: 4dB (peak) Communication interface: UART Working voltage: 2.1V-3.6V Working temperature: -40 ° C-80 ° C Receiving sensitivity: -91dbm Transmission distance: 40 meters Module size: 27 * 12.88 * 1.8mm Bluetooth version: BLE4.2+SSP dual-mode (backward compatible with 4.2, 4.0, 3.0, 2.1, 2.0) Transmission rate: BLE14 K Bytes/s SPP 40K byte/s (Android or computer Bluetooth tested 40K byte/s speed) Command parameter saving: parameter configuration and power-off data are saved SIM welding temperature:<260 ℃ Working current: 15mA

Smart Electronics Flame sensor module & infrared receiving module (3-wire system) ,Blue board

Flame sensor module & infrared receiving module (3-wire system) ,Blue board The flame sensor is sensitive to flame and is also reactive to ordinary light. It is generally used for flame alarms and other purposes. the small board output interface can be directly connected to the IO port of the microcontroller small board analog output mode and AD conversion processing, can achieve higher precision

Smart Electronics JDY-08 blue tooth 4.0BLE low-power CC2541 master-slave integrated support airsync iBeacon module

JDY-08 blue tooth 4.0 BLE low-power CC2541 master-slave integrated support airsync iBeacon module

Smart Electronics AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board Product Description: Input voltage: AC 100-240V 50/60HZ Output Voltage: DC 24V Output Current: 6-9A Output Power: 150W ( Max 220W ) Location Pore Size: 105.8 x 55.7mm Overall Dimensions: 115 x 65mm Ripple Noise: Less than 150MV Overcurrent protection: Yes Overload Protection: Yes Short circuit protection: Yes

Smart Electronics HC-SR312 Human body sensing infrared sensor PIR infrared module HC-SR312

HC-SR312 Human body sensing infrared sensor PIR infrared module HC-SR312

Smart Electronics Sound Detection Sensor Module Sound Sensor Vehicle

Sound Detection Sensor Module Sound Sensor Vehicle

Smart Electronics Wedding special igniter 12V DC universal high voltage generator pulse high voltage module output 60KV arc

Wedding special igniter 12V DC universal high voltage generator pulse high voltage module output 60KV arc

Smart Electronics XH-M203 Full Automatic Water Level Controller Pump Switch Module AC/DC 12V Relay

XH-M203 Full Automatic Water Level Controller Pump Switch Module AC/DC 12V Relay

Smart Electronics 12V Time Delay Relay Module Car Start Delay Switch Time Relay Module

12V Time Delay Relay Module Car Start Delay Switch Time Relay Module

Smart Electronics MT3608 dc to dc step up booster module 28V 2A Adjustable Boost Converter Module

MT3608 dc to dc step up booster module 28V 2A Adjustable Boost Converter Module

RS422 to TTL/UART/MCU Serial Port Signal Mutual Module with Over-Voltage Over-Current Protection-3.3V

VCC: + 3.3V TXD : The module's TTL (UART) to send, connected to the microcontroller's RXD receiver pin; RXD : The module's TTL (UART) receiver, connected to the microcontroller TXD send pin; GND : The module ground wire (this wire must be connected with the ground wire of microcontroller system);

Smart Electronics Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board

Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board This plate with switching function, SW short, will turn off the power amplifier Working Mode: Class D (PWM modulation type) Chip Type: PAM8610 Power Range: DC 6V-15V (self-protection) Recommended Voltage: DC 12V(2A) Output Power: 10Wx2(8Ω) 15Wx2(4Ω) Frequency Response: 20HZ-15KHZ Static Current: 20MA (DC12V) SNR: 90% Recommended Speakers: 10-100W Input Impedance: 15K Output Impedance: 4-8Ω Harmonic Distortion: <0.1% Size: Approx. 3cm x 2.5cm/ 1.19" x 0.98"

Smart Electronics NRF24L01+Wireless Module Power Enhanced 2.4G Upgraded Wireless Communication Module

NRF24L01+Wireless Module Power Enhanced 2.4G Upgraded Wireless Communication Module

Smart Electronics 1.2V 12V ZB2L3 18650 Li-ion Lithium Battery Capacity Resistance Lead-acid Meter Discharge Tester

1.2V 12V ZB2L3 18650 Li-ion Lithium Battery Capacity Resistance Lead-acid Meter Discharge Tester Maximum support 15V 3A discharged through the discharge voltage and current, itself does not discharge Maximum capacity statistics support 9999Ah (9999000mAh) Automatically identify and develop appropriate battery termination voltage can also be manually adjusted

Smart Electronics DC5V-12V Charging module for lithium battery 18650 UPS voltage converter uninterruptible power supply module

DC5V-12V Charging module for lithium battery 18650 UPS voltage converter uninterruptible power supply module Product parameters: Starting voltage: 1.2V Working voltage: 2V-6.5V Output voltage: 5V/9V/12V optional Working voltage is 2V-6.5V Input current: 2A Output power: ≤8W (no matter how high it is, it is easy to overheat) No-load current 2-3.5mA (input 1.5V output 12V) Board size: 33*16*6.5mm Output pad: USB/DC optional

Smart Electronics 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module Use precautions: 1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and ​negative do not pick wrong 2. Recommended power supply ±65V 3. Recommended 4-8Ω / 10-18inch speaker 4. Carefully check before electricity, ensure the wiring is correct.

Smart Electronics ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

Smart Electronics ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things

ESP-WROOM-02 development board D1 For Nodemcu wifi Internet of Things
Previous： Smart Electronics MAX485 Module RS-485 TTL to RS485 MAX485CSA Converter Module
Next： Smart Electronics DC DC Boost Converter Constant Module Current Mobile Power Supply 250W 10A LED Driver Module Non-isolated Step Up Module
Return
TOP
86-755-83877216
smartbes
smartbes