Search

XL 6009 DC to DC Step Up Converter xl6009 step-up power module dc motor

Products > Module > XL 6009 DC to DC Step Up Converter xl6009 step-up power module dc motor
    • 1
    • 2
    • 3
    • 4

XL 6009 DC to DC Step Up Converter xl6009 step-up power module dc motor

This DC-DC Module is based on IC XL6009E1 which is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip that offers superior performance over the first generation technology LM2577. XL6009 replaces LM2577 module as LM2577 is about to be phased out.

shared：



This DC-DC Module is based on IC XL6009E1 which is a high-performance step-up switching

current (BOOST) module. The module uses the second generation of high-frequency switching
technology XL6009E1 core chip that offers superior performance over the first generation
technology LM2577. XL6009 replaces LM2577 module as LM2577 is about to be phased out. 

Type Non:Isolated Boost ( BOOST )

Voltage Regulation:+-0.5%
Working Temperature:-40 deg C ~ +85 deg C

Dimensions:43mm * 21mm * 14mm (length * width* height)

Input Range:3V ~ 32V

Output Range:5V ~ 35V

Input Current:4A (maximum), load 18mA ( 5Vinput, 8V output, no-load is less than 18mA . The higher the voltage

Conversion Efficiency:Better than 94% (the greater the current, the lower the efficiency)

Switching Frequency:400KHz

Output Ripple:50mV (the higher the voltage, the greater the current, the greater ripple)

Load Regulation:+-0.5%




Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

DIY Ble 5.0 Audio Receiver Module MP3 Ble Decoder Board Car Audio Speaker 4.1

Smart Electronics PAM8403 Wireless Stereo Audio Receiver Module For Digital Amplifier Sound Loud Board Micro USB BlUETOOTH 4.0 3W+3W

PAM8403 Wireless Stereo Audio Receiver Module For Digital Amplifier Sound Loud Board Micro USB BlUETOOTH 4.0 3W+3W 1. Working voltage: DC 5V 2. Output power: 3W+3W 3. Speaker type: 3W*2 4-8ohm 4. Mounting Hole: 3.0mm Features: Mini design, sound loud and clear, strong sense of hierarchy, ultra-small size, simple installation, wide application range, low prices, quality and stability

RS422 to TTL/UART/MCU Serial Port Signal Mutual Module with Over-Voltage Over-Current Protection-3.3V

VCC: + 3.3V TXD : The module's TTL (UART) to send, connected to the microcontroller's RXD receiver pin; RXD : The module's TTL (UART) receiver, connected to the microcontroller TXD send pin; GND : The module ground wire (this wire must be connected with the ground wire of microcontroller system);

Smart Electronics 5A DC to DC CC CV Lithium Battery Step down Charging Board Led Power Converter module XL4015

5A DC to DC CC CV Lithium Battery Step down Charging Board Led Power Converter module XL4015 Three in one: (1) Use as an ordinary step-down module with over-current protection capability; (2) Used as a charger for various voltage values of lithium batteries, batteries, nickel-cadmium nickel-metal hydride batteries (battery pack), used in solar panels, wind turbines and other occasions; (3) Use as a high-power LED constant current drive module

Smart Electronics AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board Product Description: Input voltage: AC 100-240V 50/60HZ Output Voltage: DC 24V Output Current: 6-9A Output Power: 150W ( Max 220W ) Location Pore Size: 105.8 x 55.7mm Overall Dimensions: 115 x 65mm Ripple Noise: Less than 150MV Overcurrent protection: Yes Overload Protection: Yes Short circuit protection: Yes

Smart Electronics TTGO T-Display ESP32 WiFi And Ble Module Development Board

TTGO T-Display ESP32 WiFi And Ble Module Development Board Chipset： ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH： QSPI flash 4MB SRAM： 520 kB SRAM Button： Reset USB to TTL： CP2104 Modular interface： UART,SPI,SDIO,I2C,LED PWM,TV PWM,I2S,IRGPIO,ADC,capacitor touch sensor,DACLNA pre-amplifier

16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685 DIY Servo Shield Module

1000W ZVS Carbon Steel Flyback Driver Low Voltage Stable Induction Heating Board Module Plate

100% brand new and high quality! This section of induction heating using low-voltage DC power supply 12-48V. Maximum current 20A, maximum power 1000W. Can be used for DIY players to heat treatment of small parts such as quenching, annealing, etc. Can directly heat iron, carbon steel, graphite, titanium alloy and other materials. Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.

74HC595 driver 8-digit digital tube display module

1. Two 595 digital tubes are used to drive the digital tube, which needs 3 IO ports of single chip microcomputer, and it is displayed according to the principle of dynamic scanning of digital tube; 2. wide working voltage 3.3V to 5V; 3. PCB size: 71mm * 22mm 4. digital tube model: 0.364 bits

Smart Electronics XL4016 DC/CC Adjustable 0.2- 9A 300w Step Down Buck Converter 5-40V To 1.2-35V Power Supply Module LED Driver

XL4016 DC/CC Adjustable 0.2- 9A 300w Step Down Buck Converter 5-40V To 1.2-35V Power Supply Module LED Driver Applications: 1. High-power LED driver. 2. Lithium battery(or lead accumulator) charge. 3. Vehicle-mounted power supply. 4. Low voltage system power supply. 5. 6V, 12V, 14V, 24V battery charge. 6. On-board laptop power supply. 7. regulated power supply. 8.Low voltage power supply system.

Smart Electronics 0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface

0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface Feature Size: 0.49 inch Dot matrix: 64*32 Monochrome: white, blue Hardware interface: I2C (14 feet) Driver chip: SSD1306/SH1106 Drive voltage: 3.3V Working temperature: -40℃-+70℃; Storage temperature: -40℃-+85℃; Product features: self-luminous, high brightness, high contrast, ultra-thin, full viewing angle, visible under sunlight, wide temperature, low power consumption, fast response speed

Smart Electronics DIY kit 3 Channel 2 * 18W 30W High Power Fever Super Bass AC TDA2030A Dual 12V Power Amplifier Board 2.1

DIY kit 3 Channel 2 * 18W 30W High Power Fever Super Bass AC TDA2030A Dual 12V Power Amplifier Board 2.1

MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000

●Support 100Ω to 1kΩ (at 0°C) platinum resistance RTD (PT100 to PT1000) ●Conversion time: 21ms (maximum) ●15-bit ADC resolution; nominal temperature resolution is 0.03125°C (non-linear change with RTD) ● Under the whole working conditions, the total accuracy is maintained at 0.5°C (0.05% full range) ● SPI compatible interface, compatible with 2-wire, 3-wire and 4-wire sensor connection

Smart Electronics 3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486

3.5" inch 480*320 MCU SPI Serial TFT LCD Module Display Screen with Touch Panel Build-in Driver ILI9486 100% brand new and high quality Features: Vivid TFT Display in 65K Color. Touch Panel Selected. SPI Interface, 4 IOs only. With SD Card Extended (Except 1.44"). Module Display Screen only, other accessories demo in the picture is not included.

Smart Electronics IR Infrared Proximity Sensor Obstacle Avoidance module for Arduino Raspberry Pi DIY Smart Car 3PIN Robot Reflective Photoelec

IR Infrared Proximity Sensor Obstacle Avoidance module for Arduino Raspberry Pi DIY Smart Car 3PIN Robot Reflective Photoelec

Smart Electronics HC-42 Ble module BLE5.0 master-slave integration nRF52832 wireless serial communication ibeacon

HC-42 Ble module BLE5.0 master-slave integration nRF52832 wireless serial communication ibeacon Module Name: HC-42 Working frequency band: 24G Communication interface: UART Shutdown current: 0.3uA Communication level: 1.8-3.6V Transmission power: -40-4dBm Communication distance: 40m/2Mbps (Bluetooth 5.0) Antenna interface: built-in PCB antenna Receiving sensitivity: -96dbm@1Mbps Air speed: 1mbps/2mbps Working humidity: 10% -90% Storage temperature: -40 ° C~85 ° C Working temperature: -25 ° C -75 ° C

DC-DC XL7015 module 5V-80V 0.8A Dc converter Step-down module Wide voltage input better than XL7005A

Smart Electronics TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories

TTP223 TTP223B Jog digital touch sensor capacitive touch touch switch modules Accessories The module is a capacitive touch switch module based on touch detection IC (ttp223b). Under normal condition,the module outputs low level and the mode is low power consumption mode; when touching the corresponding position with fingers, the module outputs high level and the mode switches to fast mode; when there is no touch for 12 seconds, the mode switches to low power consumption mode.

Smart Electronics Raindrop sensor module/rain sensor/large area raindrop module

Raindrop sensor module/rain sensor/large area raindrop module * Distribution bit to adjust sensitivity * A fixed bolt hole for easy installation * Power indicator, the output signal LED indicator * The comparator output, the signal is clean, waveform, driving ability over 15mA * Wide voltage LM393 comparator * A large area of rain board, more conducive to detect rain * Board with positioning holes to facilitate installation * Raindrops and control panels are separate, easy to wire leads
Previous： RS422 to TTL/UART/MCU Serial Port Signal Mutual Module with Over-Voltage Over-Current Protection-3.3V
Next： SIM900A module, development board, GSM/GPRS/STM32 \ super TC35i wireless data transmission module
Return
TOP
86-755-83877216
smartbes
smartbes