Search

Green mini version RC522 RFID Module IC Card Proximity Module MFRC-522 RF Module with S50 Fudan Card Keychain

Products > Module > Green mini version RC522 RFID Module IC Card Proximity Module MFRC-522 RF Module with S50 Fudan Card Keychain
    • 1

Green mini version RC522 RFID Module IC Card Proximity Module MFRC-522 RF Module with S50 Fudan Card Keychain

shared：

Smart Electronics Green mini version RC522 RFID Module IC Card

Proximity Module MFRC-522 RF Module with S50 Fudan Card Keychain

MFRC-5220 card induction module green min version


The RC522 module is a Mifare card read and

write module based on RF base station chips. The module operates at a frequency of 13.56MHz, complies

with the S014443A standard, and can support Mifare 1 S50 Mifare1 S70、 Mifare light、 Mifare Ultralight、

Mifare Pro. The module has the characteristics of ease of use, high reliability, and small size, which can

help customers conveniently and quickly apply non-contact cards to the system.


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics XH-M203 Full Automatic Water Level Controller Pump Switch Module AC/DC 12V Relay

XH-M203 Full Automatic Water Level Controller Pump Switch Module AC/DC 12V Relay

0.49 inch 0.5 inch OLED 64x32 ssd1315 0.49 OLED display screen highlighted OLED

Smart Electronics FM Transmitter Wireless Microphone Surveillance Frequency Board Module For Arduino Adjustable Capacitor DC 800M 85-115MHz

FM Transmitter Wireless Microphone Surveillance Frequency Board Module For Arduino Adjustable Capacitor DC 800M 85-115MHz

DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module

product description: Power amplifier chip: TPA3118 Amplifier power: 1*60W Supply voltage: 8~24VDC Speaker impedance: 4-8Ω Size: 46*35*1.6mm (length, width and thickness) Total height of the board: 12mm

Smart Electronics 360 Degrees Rotary Encoder Module Brick Sensor Switch Development KY-040

360 Degrees Rotary Encoder Module Brick Sensor Switch Development KY-040

DC 30W adjustable booster module LM2587 outperforms the lm2577 in power 5A

Original UNO R3 development board original single-chip C language programming learning motherboard kit

MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor

MH-Z19B 0-5000PPM Mh-z19c 400-5000ppm C is an upgrade of B Carbon dioxide gold shell (non mh-z19) 400-5000ppm Carbon dioxide white shell (non mh-z19) 400-5000ppm

MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000

●Support 100Ω to 1kΩ (at 0°C) platinum resistance RTD (PT100 to PT1000) ●Conversion time: 21ms (maximum) ●15-bit ADC resolution; nominal temperature resolution is 0.03125°C (non-linear change with RTD) ● Under the whole working conditions, the total accuracy is maintained at 0.5°C (0.05% full range) ● SPI compatible interface, compatible with 2-wire, 3-wire and 4-wire sensor connection

0.49 inch OLED bare screen display LCD screen resolution 64 * 32 IIC interface SSD1306 driver (white)

Electric Unit PAM8610 12V 2x15W Dual Channel Stereo C Digital power amplifier board

This plate with switching function, SW short, will turn off the power amplifier Working Mode: Class D (PWM modulation type) Chip Type: PAM8610 Power Range: DC 6V-15V (self-protection) Recommended Voltage: DC 12V(2A) Output Power: 10Wx2(8Ω) 15Wx2(4Ω) Frequency Response: 20HZ-15KHZ Static Current: 20MA (DC12V) SNR: 90% Recommended Speakers: 10-100W Input Impedance: 15K Output Impedance: 4-8Ω Harmonic Distortion: <0.1% Size: Approx. 3cm x 2.5cm/ 1.19" x 0.98"

3.5 inch SPI serial port TFT LCD display module LCD touch screen ILI9488/6/1 driver 320X480

74HC595 driver 8-digit digital tube display module

1. Two 595 digital tubes are used to drive the digital tube, which needs 3 IO ports of single chip microcomputer, and it is displayed according to the principle of dynamic scanning of digital tube; 2. wide working voltage 3.3V to 5V; 3. PCB size: 71mm * 22mm 4. digital tube model: 0.364 bits

DC-DC Step Up Converter Booster Power Supply Module Boost Step-up Board MAX output 28V 2A MT3608

500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

Use precautions: 1. Rated supply voltage is ±65V, ±58---±70V range, do not over 70V! positive and ​negative do not pick wrong 2. Recommended power supply ±65V 3. Recommended 4-8Ω / 10-18inch speaker 4. Carefully check before electricity, ensure the wiring is correct.

DIY kit 3 Channel 2 * 18W 30W High Power Fever Super Bass AC TDA2030A Dual 12V Power Amplifier Board 2.1

Smart Electronics 37 in one sensor kit, 37 sensor kits, 45 in one sensor kit

37 in one sensor kit, 37 sensor kits, 45 in one sensor kit

GY-530 VL53L0X Laser Ranging Sensor ToF Ranging Time of Flight Ranging Sensor Module

TPA3255 mono 600W high-power full frequency/subwoofer optional fever digital power amplifier board

TPA3255 is a high-performance class D power amplifier, it has class D efficiency and can bring true high-end sound quality. The device has an advanced integrated feedback design and a proprietary high-speed gate driver error correction function (PurePath™ Ultra HD). This technology allows the device to maintain ultra-low distortion throughout the audio frequency band while exhibiting wonderful sound quality.

Rotating potentiometer knob cap Digital control module Rotary encoder module

Digital control module Rotary encoder module rotating potentiometer knob cap Working voltage: 5 v A circle of pulse count: 20 Rotary encoder through rotation direction and reverse direction can count is in the process of the number of output pulse, rotating counter unlike potentiometer, the rotation count there is no limit.Cooperate with the buttons on the rotary encoder, can be reset to the initial state, that is, from zero start counting.
Previous： Smart Electronics MFRC-522 RC522 RFID Module Red Board (with accessories) IC Card Proximity Module
Next： New version of PN532 NFC RFID V3 module for near-field communication, supporting communication with Android phones
Return
TOP
86-755-83877216
smartbes
smartbes