Search

M8 photoelectric switch E3F-DS10C4 infrared sensor E18-D80NK obstacle avoidance sensor module normally open

Products > Sensor > M8 photoelectric switch E3F-DS10C4 infrared sensor E18-D80NK obstacle avoidance sensor module normally open
    • 1

M8 photoelectric switch E3F-DS10C4 infrared sensor E18-D80NK obstacle avoidance sensor module normally open

High quality chips

Accurate sensing

Strong anti-interference ability

Stable performance
shared：

M8 photoelectric switch E3F-DS10C4 infrared sensor E18-D80NK obstacle avoidance sensor module normally open
Product Options
E18-D80NK 5V without DuPont head
7-30cm four wire NPN
E18-D80NK 5V with DuPont head
7-30cm PNP normally open
10cm NPN normally open
7-30cm PNP normally closed
10cm NPN normally closed
12-50cm NPN normally open
10cm four wire NPN
12-50cm NPN normally closed
10cm PNP normally open
12-50cm four wire NPN
10cm PNP normally closed
12-50cm PNP normally open
1-10cm NPN normally open
12-50cm PNP normally closed
1-10cm NPN normally closed
20-100cm NPN normally open
1-10cm four wire NPN
20-100cm NPN normally closed
1-10cm PNP normally open
20-100cm four wire NPN
1-10cm PNP normally closed
20-100cm PNP normally open
7-30cm NPN normally open
20-100cm PNP normally closed
7-30cm NPN normally closed
Please contact us 


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics MQ2 Mq-2 gas sensor probe

MQ2 Mq-2 gas sensor probe 1. Good sensitivity to combustible gas in a wide concentration range. 2. High sensitivity to methane 3. Long service life and low cost. 4. A simple drive circuit is enough. 5. Household gas leak alarm. 6. Industrial combustible gas alarm. 7. Portable gas detector.

LJ12A3-4-Z/BY Inductive Proximity Sensor Switch 4mm Detection PNP DC6-36V NO Normally Open

Smart Electronics TGS822 TGS 822 alcohol gas sensor

TGS822 TGS 822 alcohol gas sensor Parameters: Alcohol measurement range: 50-5,000ppm Sensitivity (resistance ratio): 0.40 ± 0.1 Circuit voltage: 24V (DC/AC) Heater voltage: 5V±0.2V(AC/DC)

MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor

MH-Z19B 0-5000PPM Mh-z19c 400-5000ppm C is an upgrade of B Carbon dioxide gold shell (non mh-z19) 400-5000ppm Carbon dioxide white shell (non mh-z19) 400-5000ppm

Smart Electronics MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 gas sensor probe non-module

MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 gas sensor probe non-module Feature 1. Good sensitivity to combustible gas in a wide concentration range. 2. High sensitivity to methane 3. Long service life and low cost. 4. A simple drive circuit is enough. 5. Household gas leak alarm. 6. Industrial combustible gas alarm. 7. Portable gas detector.

Force Sensor RP-C18.3-ST Flexible Thin Film Pressure Sensor Intelligent 20g-6kg

The flexible sensor has the characteristics of flexible ultra-thin, ultra-low power consumption and extreme speed response, etc. Small size, this flexible pressure sensor is based on new nanometer pressure-sensitive materials ​supplemented by ultra-thin film substrate. This pressure sensor has the characteristic of high stability, high consistency. Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.

High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor

Film pressure sensor is piezoresistive, also known as resistive, equivalent to varistor in the circuit. When the sensor has no external load, the circuit is in high resistance state (generally greater than 2m Ω). When the external pressure is applied to the sensor, the circuit resistance will decrease (tens of K Ω or less). With a multimeter, the resistance value can be read directly by connecting to two external terminals. The resistance value changes with the change of external pressure. The voltage is inversely proportional to the resistance, while the voltage カ is linearly related to the conductivity, so the pressure change can be inversely deduced according to the conductivity change.

Smart Electronics Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136

Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136 The gas-sensitive material used in the MQ136 hydrogen sulfide gas sensor is tin dioxide (SnO2) with low conductivity in clean air. When there is hydrogen sulfide gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of hydrogen sulfide gas in the air increases. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration.

M12 proximity switch sensor LJ12A3-4-Z/BX/BY/AX/AY/EX/DX/EZ/DZ normally open 24V

Current specification: 300mA Rated working voltage: DC: 6-36V Distance measurement: 4mm±10% Output mode: NPN NO (normally open) Level signal: low level Installation method: non-embedded Thread diameter: M12X1 Shell material: brass nickel plated Wire length: 1.2 meters

DHT22 digital temperature and humidity sensor AM2302 temperature humidity module

Technical parameter Measuring range Temperature: -40….+80°℃ Humidity: 0...99.9%RH

Smart Electronics HAL506 UA-2 TO92-UA Automotive Hall Sensor

HAL506 UA-2 TO92-UA Automotive Hall Sensor Model: HAL506 UA-2 Description: TO92-UA Packaging: CutTape(CT) AlternatePackaging Series: HAL®5xy Part status: LastTimeBuy Technology: Hall Effect Voltage-power supply: 3.8V~24V Current-power supply (maximum): 5.2mA Current-output (maximum): 20mA Output type: OpenDrain Feature: TemperatureCompensated Working temperature: -40°C~140°C (TJ) Installation type: ThroughHole Supplier device package: TO-92UA-2 Package/Shell: TO-226-3TO-92-3ShortBody

MQ5 module, liquefied gas, gas detection sensor module

The gas sensitive material used in the MQ-5 gas sensor is tin dioxide (SnO2), which has low conductivity in clean air. When there is combustible gas in the environment where the sensor is located, the conductivity of the sensor increases with the increase of the combustible gas concentration in the air.

MLX90614ESF-BAA non-contact infrared temperature sensor high precision digital temperature sensor original

Model: MLX90614ESF-BAA Material: metal Origin: Mainland China Output model category: Digital sensor Applicable scene: Car air conditioner, indoor heating, medical equipment temperature measurement Sensor category: infrared sensor Size: 31x31x18mm Working current: 0.01A Working voltage: 3V

Infrared temperature measurement sensor MLX90614ESF-BAA for infrared forehead thermometer

Product category: temperature sensor mounted on board Output type: Digital Configuration: Remote Accuracy: +/- 0.5 C Power supply voltage-minimum: 2.6 V Power supply voltage-maximum: 3.6 V Interface type: 2-Wire Resolution: 10 bit Minimum operating temperature:-40° C Maximum operating temperature: +85 °C Installation style: Through Hole Package / Box: TO-39-4 Package: Tube Temperature threshold: +380 °C Working power supply current: 1.3 mA Unit weight: 2 g

Original imported 0.2 "pressure sensor FSR400 Force sensitive resistor fsr sensor

SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original

SHT1x - Digital Temperature and Humidity Sensor (RH/T) SHT1x series SHT10 - low cost version, ±4.5% RH accuracy SHT11 - standard version, ±3% RH accuracy SHT15 - high-end version, ±2% RH accuracy

Smart Electronics MQ-9 carbon monoxide Combustible gas sensor alarm module

MQ-9 carbon monoxide Combustible gas sensor alarm module Feature: Size: 32mm * 22mm * 27mm Main chip: LM393, MQ-9 gas sensors Working voltage: DC 5 V Characteristics: 1, having a signal output instruction. 2, dual signal output (analog output, and TTL level output) 3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller) 4, 0 - 5V analog output voltage, the higher the concentration the higher the voltage. 5, for CO, gas, liquefied petroleum gas with high sensitivity and good selectivity. 6, has a long life and reliable stability 7, rapid response and recovery characteristics Application: MQ-9 sensor main family, environmental detection of carbon monoxide gas for CO, gas, liquefied petroleum gas field testing;

Smart Electronics TO-92 Temperature sensor 18B20 Sensor Electronic chip IC for sensor hall electronic components

TO-92 Temperature sensor 18B20 Sensor Electronic chip IC for sensor hall electronic components Condition:New Supply Voltage:standar Dissipation Power:standar Operating Temperature:standar Funtion:temperature sensor
Previous： 300A New Energy Battery Storage Cabinet All Copper Through High Current Terminal Connector For Electric Vehicle
Next： 24V peltier semiconductor refrigerator mini air conditioner DIY electronic refrigerator production cooler devices cooling kit
Return
TOP
86-755-83877216
smartbes
smartbes