Search

Smart Electronics Original imported flexiforce film pressure sensor A301 1/25/100lbs

Products > Thin Film Pressure Sensor > Smart Electronics Original imported flexiforce film pressure sensor A301 1/25/100lbs
    • 1

Smart Electronics Original imported flexiforce film pressure sensor A301 1/25/100lbs

Original imported flexiforce film pressure sensor A301 1/25/100lbs

The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.



The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb).
The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing
the drive voltage and adjusting the resistance of the feedback resistor.
shared：

 

 

FlexiForc A301 Sensor

 

The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.

The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb).
The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing
the drive voltage and adjusting the resistance of the feedback resistor.

How to Adjust the Force Range:

*In order to measure higher forces, apply a lower drive voltage (-0.5 V, -0.25 V, etc.) and reduce the resistance
of the feedback resistor (1kohm min.) To measure lower forces, apply a higher drive voltage and increase the
resistance of the feedback resistor. 

For an alternative to the recommended circuit, see the Related Electronics tab.

Smart Electronics Original imported flexiforce film pressure sensor A301 1/25/100lbs

 

 Smart Electronics Original imported flexiforce film pressure sensor A301 1/25/100lbs


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics Thin film pressure sensor-single point circular diameter 4 mm flexible resistive FSR

IMS054-C04A (IMS-C04A) is a member of the single-node sensor family. They are all very reliable piezoresistive sensors, using A structure with double-sided silver electrodes. When the pressure (pressure) applied to the effective area of the sensor increases, the output resistance of the sensor decreases, and the single-point sensor can be measured with a multimeter or the customer's own circuit

Smart Electronics AM2305 Digital temperature and humidity sensor

AM2305 Digital temperature and humidity sensor 1) The relative humidity and temperature, calibration of all digital output 2) Excellent long-term stability 3) Without additional components 4) Long distance signal transmission 5) ultra low power 6) 4 pin installation 7) Completely interchangeable

Smart Electronics Duct type temperature and humidity sensor housing

Duct type temperature and humidity sensor housing 1. Copper sintered dust cover 2. Stainless steel lock wire seat 3. Good air permeability 4. Widely applicable 5. High cost performance

Smart Electronics PT100 temperature sensor thermal resistance thermocouple WZP-035 probe waterproof and corrosion resistant high temperature

PT100 temperature sensor thermal resistance thermocouple WZP-035 probe waterproof and corrosion resistant high temperature Non-standard customization High temperature thermal resistance 450 degree specification price as above NTC thermal 4*30*2 meters K type PTFE low temperature 200 degrees 2*30mm*1m A grade three core

Smart Electronics MQ-9 carbon monoxide Combustible gas sensor alarm module

MQ-9 carbon monoxide Combustible gas sensor alarm module Feature: Size: 32mm * 22mm * 27mm Main chip: LM393, MQ-9 gas sensors Working voltage: DC 5 V Characteristics: 1, having a signal output instruction. 2, dual signal output (analog output, and TTL level output) 3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller) 4, 0 - 5V analog output voltage, the higher the concentration the higher the voltage. 5, for CO, gas, liquefied petroleum gas with high sensitivity and good selectivity. 6, has a long life and reliable stability 7, rapid response and recovery characteristics Application: MQ-9 sensor main family, environmental detection of carbon monoxide gas for CO, gas, liquefied petroleum gas field testing;

Smart Electronics Thin film pressure sensor resistive force sensitive and pressure sensitive plantar flexible PVDF robot tactile FSR402 406

Thin film pressure sensor resistive force sensitive and pressure sensitive plantar flexible PVDF robot tactile FSR402 406

Customized 304 capillary tube/stainless steel seamless pipe, hollow round tube

Smart Electronics High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor

High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor Film pressure sensor is piezoresistive, also known as resistive, equivalent to varistor in the circuit. When the sensor has no external load, the circuit is in high resistance state (generally greater than 2m Ω). When the external pressure is applied to the sensor, the circuit resistance will decrease (tens of K Ω or less). With a multimeter, the resistance value can be read directly by connecting to two external terminals. The resistance value changes with the change of external pressure. The voltage is inversely proportional to the resistance, while the voltage カ is linearly related to the conductivity, so the pressure change can be inversely deduced according to the conductivity change.

Smart Electronics Hall effect sensor ss49e 49e hall element oh49e

Hall effect sensor ss49e 49e hall element oh49e The 49E is a Hall-effect integrated circuit. The output voltage changes with the change of the magnetic flux density, and it can detect the slight change of the magnetic field. It can be used to measure the motion of objects, distance, position sensor, etc. It is alsosuitable for use in harsh environments or heavily polluted conditions.

Smart Electronics MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 gas sensor probe non-module

MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 gas sensor probe non-module Feature 1. Good sensitivity to combustible gas in a wide concentration range. 2. High sensitivity to methane 3. Long service life and low cost. 4. A simple drive circuit is enough. 5. Household gas leak alarm. 6. Industrial combustible gas alarm. 7. Portable gas detector.

Smart Electronics D2027 piezoresistive flexible film pressure sensor foot pressure force measurement customization

D2027 piezoresistive flexible film pressure sensor foot pressure force measurement customization Terminal type Male terminal Female terminal Pressure range 500g 2kg 5kg 10kg 20kg 40kg 60kg 100kg

Smart Electronics T106 waterproof temperature probe thermal resistance sensor thermistor 10K B3435

T106 waterproof temperature probe thermal resistance sensor thermistor 10K B3435 Product name: Waterproof probe sensor Product model: T106 Resistance type: NTC10K thermistor Detection accuracy: ±1℃ Plug type: XH2.54-2 pin plug (2P) Measuring temperature: -50°C~110°C Wire material: stranded copper wire tinned sheath Product length: 0.5m/1m/2m/3m/ customized

Smart Electronics Ozone gas sensor module ZE25-O3

Ozone gas sensor module ZE25-O3 The ZE25-O3 electrochemical ozone module is a general-purpose, compact module. The electrochemical principle is used to detect the ozone gas present in the air, which has good selectivity and stability. Built-in temperature sensor for temperature compensation; digital output and analog voltage output for easy use. ZE25-O3 is a universal gas module designed and manufactured by combining sophisticated electrochemical detection technology with sophisticated circuit design.

Smart Electronics MQ2 Mq-2 gas sensor probe

MQ2 Mq-2 gas sensor probe 1. Good sensitivity to combustible gas in a wide concentration range. 2. High sensitivity to methane 3. Long service life and low cost. 4. A simple drive circuit is enough. 5. Household gas leak alarm. 6. Industrial combustible gas alarm. 7. Portable gas detector.

Smart Electronics MQ6 MQ-6 combustible gas/liquefied petroleum gas sensor probe dip6

MQ6 MQ-6 combustible gas/liquefied petroleum gas sensor probe dip6

Smart Electronics MLX90614ESF-BAA non-contact infrared temperature sensor high precision digital temperature sensor original

MLX90614ESF-BAA non-contact infrared temperature sensor high precision digital temperature sensor original Model: MLX90614ESF-BAA Material: metal Origin: Mainland China Output model category: Digital sensor Applicable scene: Car air conditioner, indoor heating, medical equipment temperature measurement Sensor category: infrared sensor Size: 31x31x18mm Working current: 0.01A Working voltage: 3V

Smart Electronics LJ12A3-4-Z/BY Inductive Proximity Sensor Switch 4mm Detection PNP DC6-36V NO Normally Open

LJ12A3-4-Z/BY Inductive Proximity Sensor Switch 4mm Detection PNP DC6-36V NO Normally Open

Smart Electronics Infrared temperature measurement sensor MLX90614ESF-BAA for infrared forehead thermometer

Infrared temperature measurement sensor MLX90614ESF-BAA for infrared forehead thermometer Product category: temperature sensor mounted on board Output type: Digital Configuration: Remote Accuracy: +/- 0.5 C Power supply voltage-minimum: 2.6 V Power supply voltage-maximum: 3.6 V Interface type: 2-Wire Resolution: 10 bit Minimum operating temperature:-40° C Maximum operating temperature: +85 °C Installation style: Through Hole Package / Box: TO-39-4 Package: Tube Temperature threshold: +380 °C Working power supply current: 1.3 mA Unit weight: 2 g

Smart Electronics Original FlexiForce 100/25/1 lbs film pressure force sensor A201

Original FlexiForce 100/25/1 lbs film pressure force sensor A201
Previous： Smart Electronics Thin film pressure sensor-single point circular diameter 4 mm flexible resistive FSR
Next： Smart Electronics Force Sensor RP-C18.3-ST Flexible Thin Film Pressure Sensor Intelligent 20g-6kg
Return
TOP
86-755-83877216
smartbes
smartbes