Search

Smart Electronics JDY-08 blue tooth 4.0BLE low-power CC2541 master-slave integrated support airsync iBeacon module

Products > Bluetooth Module > Smart Electronics JDY-08 blue tooth 4.0BLE low-power CC2541 master-slave integrated support airsync iBeacon module
    • 1

Smart Electronics JDY-08 blue tooth 4.0BLE low-power CC2541 master-slave integrated support airsync iBeacon module

JDY-08 blue tooth 4.0 BLE low-power CC2541 master-slave integrated support airsync iBeacon module
shared：

HC-42 Ble module BLE5.0 master-slave integration nRF52832 wireless serial

communication ibeacon

The JDY-08 transparent transmission module is based on the Bluetooth 4.0 protocol standard, with a working frequency

range of 2.4GHz, modulation mode of GFSK, transmission power of 0dB, and a maximum transmission distance of 80 meters.

It is designed with the TICC2541 chip and supports users to modify device name, service UUID, transmission power,

pairing password and other instructions through AT commands, making it convenient, fast and flexible to use.

If you need other specification or other products,please send message to us

*Part Number | Package Type | Quantity are needed if you send messages to us *Send all models you are looking for to us,we can quote all of them. *Welcome to attach Purchase / Factory Bom



Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

CC1101 Intelligent Industrial Wireless RF Communication Module SPI Transceiver Module 868MHz

Features: 1.Low power UHF wireless transceivers @ 868MHZ 2.Support FSK , GFSK , ASK / OOK and MSK 3.Configurable data rate 1.2K to 500kps 4.Two 64 bytes FIFO for TX & RX buffer 5.Packet handling including address recognition 6.Support Wake-on-radio 7.Support Clear Channel Assessment（Listen-before-talk ) 8.RSSI Output &Link Quality Indictor 9.SPI Interface 10.Wide Operating Voltage 1.8-3.6V

NRF52832 Low Power Ble 4.2 Module 2.4G Wireless Module BLE4.0 4.2 Module

0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface

Feature Size: 0.49 inch Dot matrix: 64*32 Monochrome: white, blue Hardware interface: I2C (14 feet) Driver chip: SSD1306/SH1106 Drive voltage: 3.3V Working temperature: -40℃-+70℃; Storage temperature: -40℃-+85℃; Product features: self-luminous, high brightness, high contrast, ultra-thin, full viewing angle, visible under sunlight, wide temperature, low power consumption, fast response speed

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board Product Description: Input voltage: AC 100-240V 50/60HZ Output Voltage: DC 24V Output Current: 6-9A Output Power: 150W ( Max 220W ) Location Pore Size: 105.8 x 55.7mm Overall Dimensions: 115 x 65mm Ripple Noise: Less than 150MV Overcurrent protection: Yes Overload Protection: Yes Short circuit protection: Yes

3.5-inch TFT LCD display screen module serial port SPI driver ILI9488 with capacitive touch RGB320 * 480

LCD1602 yellow-green screen 1602A lcd display blue

69.5*21.8*17.8 weighs about 30 grams

DC 12V-24V TPA3118 60W Mono Digital Audio Power Amplifier Board Amp Module

product description: Power amplifier chip: TPA3118 Amplifier power: 1*60W Supply voltage: 8~24VDC Speaker impedance: 4-8Ω Size: 46*35*1.6mm (length, width and thickness) Total height of the board: 12mm

MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor

MH-Z19B 0-5000PPM Mh-z19c 400-5000ppm C is an upgrade of B Carbon dioxide gold shell (non mh-z19) 400-5000ppm Carbon dioxide white shell (non mh-z19) 400-5000ppm

The promotional HC-SR04 ultrasonic module Ultrasonic ranging module

The main technical parameters: 1, using voltage: DC5V 2: static current: less than 2 ma 3, high level output: 5 v 4, level output: 0 v 5, induction Angle: no more than 15 degrees 6, detection range: 2 cm - 450 cm 7,high precision: up to 0.3 cm

DC-DC XL7015 module 5V-80V 0.8A Dc converter Step-down module Wide voltage input better than XL7005A

TPA3116D2 high power /HIFI digital 2.1 power amplifier board 10-25V

Product Name: high power digital 2.1 power amplifier board Chip type: tpa3116d2 * 2 Input voltage: dc10-25v (DC) Output power: 50wx2 + 100wxi Max Channel: dual channel + 0.1 subwoofer Output impedance: 4-8 Ω Frequency response 20Hz-20KHz Protection function: short circuit overheat power supply anti reverse connection Switching frequency: 1.2MHz Features: power on delay / anti shock Size: about 88 * 66 * 27.6m Net weight: about 105g

Smart Electronics Esp-32s esp-wroom-32 Wifi Blue-tooth Board Esp32 Development Board esp 32 wroom

Product Optional WROOM-32 WROOM-32U WROOM-32D Neutral WROOM-32 WROOM-32E

XL 6009 DC to DC Step Up Converter xl6009 step-up power module dc motor

This DC-DC Module is based on IC XL6009E1 which is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip that offers superior performance over the first generation technology LM2577. XL6009 replaces LM2577 module as LM2577 is about to be phased out.

MAX31865 temperature sensor detector module temperature acquisition RTD/PT100-PT1000

●Support 100Ω to 1kΩ (at 0°C) platinum resistance RTD (PT100 to PT1000) ●Conversion time: 21ms (maximum) ●15-bit ADC resolution; nominal temperature resolution is 0.03125°C (non-linear change with RTD) ● Under the whole working conditions, the total accuracy is maintained at 0.5°C (0.05% full range) ● SPI compatible interface, compatible with 2-wire, 3-wire and 4-wire sensor connection

Nano V3.0 CH340 improved version Atmega328P USB to TTL with USB cable

Technical parameters : 1.12 digital input / output port D2 to D13 2.8 analog inputs A0 ~ A7 3.1 pairs TTL level serial transceiver port RX / TX 4.6 PWM port , D3 , D5, D6, D9 , D10 , D11 5. Atmel ATmega328P - AU MCU 6 USB download and power 7. Support the external 5V ... 12V DC power supply 8. To support 9V battery powered 9. support ISP download

GY-BME/BMP280 3.3V-5V temperature and humidity/atmospheric pressure sensor module

Mini Ble Audio Receiver Amplifier Board Module With Stereo Speakers

IRS2092S 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

Smart Electronics HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module

HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module Product model: HC-08 Working frequency band: 2.4G Communication interface: UART3.3VTL level Working voltage: 3.0-3.6V RSSI support: not supported Communication level: 3.3V Transmission power: 4dBm Reference distance: 80 meters Air speed: 2Mbps Antenna interface: built-in PCB antenna Communication current: 0.4uA Receiving sensitivity: 85dbm@2Mbps Working humidity: 10%~90% Storage temperature: 40 ℃ -+80 ℃ Working temperature: -25 ℃ -75 ℃
Previous： CSR8645 4.0 audio module, support APTx lossless compression speaker amplifier
Next： SIMCOM SIM868 replaces SIM808 SIM908 GSM/GPRS/GPS module
Return
TOP
86-755-83877216
smartbes
smartbes