Search

Ultra-small quad-core A9 S5P4418 development board NanoPi Fire2A, support Ubuntu+Qt5.9

Products > Raspberry Pi Series > Ultra-small quad-core A9 S5P4418 development board NanoPi Fire2A, support Ubuntu+Qt5.9
    • 1
    • 2
    • 3

Ultra-small quad-core A9 S5P4418 development board NanoPi Fire2A, support Ubuntu+Qt5.9

[Package selection]

1, the board

2, single board + heat sink

3, the basic package: single board + heat sink + power head + USB line

4, development package: single board + heat sink + power head + USB cable + TF card + card reader + USB to TTL board + serial expansion board + cross serial cable + cross network cable + DVP camera + USB camera

[Screen selection]

1, no screen

2, 4.3 inch capacitive screen [Model: S430]

3, 7 inch capacitive screen [Model: X710]
shared：

[Package selection]

1, the board

2, single board + heat sink

3, the basic package: single board + heat sink + power head + USB line

4, development package: single board + heat sink + power head + USB cable + TF card + card reader + USB to TTL board + serial expansion board + cross serial cable + cross network cable + DVP camera + USB camera

[Screen selection]

1, no screen

2, 4.3 inch capacitive screen [Model: S430]

3, 7 inch capacitive screen [Model: X710]


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics New Original SIMCOM SIM7000A SIM7000G SIM7000E, NB/CAT-M/GSM Module

New Original SIMCOM SIM7000A SIM7000G SIM7000E, NB/CAT-M/GSM Module

MAX7219 led dot matrix module 4 in 1 display module single chip microcomputer control drive module with 5p wire

MAX7219 is an integrated serial input/output common-cathode display driver, which connects a microprocessor and an 8-digit 7-segment digital LED display, and can also be connected to a bar graph display or 64 independent LEDs. It includes an on-chip B-type BCD encoder, multiple scan loops, segment word drivers, and an 8*8 static RAM to store each data. Only one external register is used to set the segment current of each LED.

Smart Electronics 37 in one sensor kit, 37 sensor kits, 45 in one sensor kit

37 in one sensor kit, 37 sensor kits, 45 in one sensor kit

TDA7293/TDA7294 Mono Channel Amplifier Module Circuit PCB Bare Board 4XFB

Model: TDA7293/TDA7294 Power supply: double AC 15V to 36V (AC needs rectification and filtering) or DC positive and negative 18V to 50V.Recommended double 35V (Note that it is not a dual 35V transformer, it is positive and negative 35V DC. And It is recommended to double 26V/200W toroidal transformer, after rectification voltage is about DC double 35V).

Universal Wireless Charging PCBA Coil Charging Pcb Circuit Board Qi Wireless charger receiver module

GY-906 MLX90614ESF infrared temperature sensor module

Module model: GY-906 Using IC: MLX90614 Power supply: 3-5v (internal low dropout voltage regulation) Communication method: standard IIC communication protocol Size: 11.5*16.5mm

XH-M542 Mono Digital Power Amplifier Board TPA3116D2 High Power Amplifier 100W

Product parameters: Supply voltage: DC12-26V Output power: 100W Signal to noise ratio: 100db Number of channels: mono Product size: 79*54*16(mm)

Smart Electronics 12V Time Delay Relay Module Car Start Delay Switch Time Relay Module

12V Time Delay Relay Module Car Start Delay Switch Time Relay Module

150W Mono TPA3116D2 Digital Amplifier Board Subwoofer Trolley Box Amplifier Module XH-M571

DC5V-12V Charging module for lithium battery 18650 UPS voltage converter uninterruptible power supply module

Product parameters: Starting voltage: 1.2V Working voltage: 2V-6.5V Output voltage: 5V/9V/12V optional Working voltage is 2V-6.5V Input current: 2A Output power: ≤8W (no matter how high it is, it is easy to overheat) No-load current 2-3.5mA (input 1.5V output 12V) Board size: 33*16*6.5mm Output pad: USB/DC optional

0.49 inch OLED LCD screen 64*32 dot matrix SSD1306 driver 14Pin IIC interface

Feature Size: 0.49 inch Dot matrix: 64*32 Monochrome: white, blue Hardware interface: I2C (14 feet) Driver chip: SSD1306/SH1106 Drive voltage: 3.3V Working temperature: -40℃-+70℃; Storage temperature: -40℃-+85℃; Product features: self-luminous, high brightness, high contrast, ultra-thin, full viewing angle, visible under sunlight, wide temperature, low power consumption, fast response speed

Smart Electronics HW-658 USB Port GPS Module For Raspberry Pi

HW-658 USB Port GPS Module For Raspberry Pi Suitable For Raspberry Pi A B A+ B+ Zero 2 3. Connect via 1*8 2.54 separation distance pin header or USB micro data cable. Adopting L80-39 mould project, with 15 x 15 x 4mm Patch aerial. Super low power consumption, quick location. Support Short-circuit Protection and Aerial Detection. Support self-auxiliary AGPS (EASY technology), no need of external memory. Support LOCUS, DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN).

The promotional HC-SR04 ultrasonic module Ultrasonic ranging module

The main technical parameters: 1, using voltage: DC5V 2: static current: less than 2 ma 3, high level output: 5 v 4, level output: 0 v 5, induction Angle: no more than 15 degrees 6, detection range: 2 cm - 450 cm 7,high precision: up to 0.3 cm

PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply)

Product Name: pam8403 digital power amplifier board Specification and model: gf1002 Power supply range: 5V DC Minimum output: 3W * 2 Appearance size: 29.5 * 20.2 * 15mm (excluding protruding potentiometer rod)

Smart Electronics IR Infrared Proximity Sensor Obstacle Avoidance module for Arduino Raspberry Pi DIY Smart Car 3PIN Robot Reflective Photoelec

IR Infrared Proximity Sensor Obstacle Avoidance module for Arduino Raspberry Pi DIY Smart Car 3PIN Robot Reflective Photoelec

SIM900A module, development board, GSM/GPRS/STM32 \ super TC35i wireless data transmission module

Product Description: ardu 51 STM32 AVR MCU compatible Prototype expand The dual frequency 900/ 1800 MHz, GPRS multi-slot class 10/8,GPRS mobile station class B Power supply range: voltage is 4.6-5.2v; current is 1A or more(the current is very important). Low power consume: 1.5mA (sleep mode) Operating temperature range: -40 degrees C to +85 C Communication interface: The TTL level serial interface compatible 2.85 3.3 5v MCU Size:49*50mm

Wedding special igniter 12V DC universal high voltage generator pulse high voltage module output 60KV arc

Smart Electronics DIY HIFI M18 Stereo Wireless 4.2 MP3 Audio Receiver board Module Decoder Board MH-M18

DIY HIFI M18 Stereo Wireless 4.2 MP3 Audio Receiver board Module Decoder Board MH-M18 This product MH-M18 is a low-power Bluetooth design solution that supports the latest Bluetooth 4.2 transmission, supports Bluetooth automatic reconnection technology, and supports dual channel stereo lossless playback. After the module is connected to Bluetooth, it can quickly achieve Bluetooth wireless transmission, which is very convenient. In an open environment, the Bluetooth connection distance can reach up to 20 meters. Widely used in various Bluetooth audio reception, various audio DIY modifications, etc.

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board

AC-DC Power Supply Module AC 100-240V to DC 24V 9A Switching Power Supply Board Product Description: Input voltage: AC 100-240V 50/60HZ Output Voltage: DC 24V Output Current: 6-9A Output Power: 150W ( Max 220W ) Location Pore Size: 105.8 x 55.7mm Overall Dimensions: 115 x 65mm Ripple Noise: Less than 150MV Overcurrent protection: Yes Overload Protection: Yes Short circuit protection: Yes

Smart Electronics JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module

JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module Model: JDY-34 Antenna type: PCB board mounted antenna Working frequency band: 2.4G Transmission power: 4dB (peak) Communication interface: UART Working voltage: 2.1V-3.6V Working temperature: -40 ° C-80 ° C Receiving sensitivity: -91dbm Transmission distance: 40 meters Module size: 27 * 12.88 * 1.8mm Bluetooth version: BLE4.2+SSP dual-mode (backward compatible with 4.2, 4.0, 3.0, 2.1, 2.0) Transmission rate: BLE14 K Bytes/s SPP 40K byte/s (Android or computer Bluetooth tested 40K byte/s speed) Command parameter saving: parameter configuration and power-off data are saved SIM welding temperature:<260 ℃ Working current: 15mA
Previous： BH1750FVI digital Light Intensity BH1750 Light Module Light Ball DC5V
Next： LCD1602 yellow-green screen 1602A lcd display blue
Return
TOP
86-755-83877216
smartbes
smartbes