Search

Smart Electronics HC-SR312 Human body sensing infrared sensor PIR infrared module HC-SR312

Products > Module > Smart Electronics HC-SR312 Human body sensing infrared sensor PIR infrared module HC-SR312
    • 1
    • 2
    • 3
    • 4
    • 5

Smart Electronics HC-SR312 Human body sensing infrared sensor PIR infrared module HC-SR312

HC-SR312 Human body sensing infrared sensor PIR infrared module HC-SR312
shared：
Smart Electronics HC-SR312 Human body sensing infrared sensor PIR infrared module HC-SR312
Technical Parameters1. Working voltage: DC 2.7-12V; 2. Static power consumption: <0.1mA; 3. Delay time:2sec; 4. Blocking time:2sec; 5. Trigger mode:repeatable; 6. Sensing range: ≤100 degrees cone angle, 3-5 meters; (according to the specific lens) 7. Operating temperature: -20 - +60℃. 8.PCB external size:10mm*8mm

9.Module lens: small lens

Functional features

a. Enhanced anti-interference, internal digital signal processing, direct high and low level output.

b. Repeatable trigger mode: that is, after the induction output high level, in the delay time period, if there is a human body

in its sensing range of activities, its output will remain high until the person leaves the delay time, before becoming low level

(that is: the induction module detects each activity of the human body will be automatically postponed after a delay time period,

and the time of the last activity as the starting point of the delay time).


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

TPA3110 XH-A232 30W+30W 2.0 Channel Digital Stereo Audio Power Amplifier DC 8-26V 3A C6-001 3110 Amplifier Board

Smart Electronics HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module

HC-08 BLE4.0 master-slave integrated Bluetooth module CC2540 wireless serial communication data transmission module Product model: HC-08 Working frequency band: 2.4G Communication interface: UART3.3VTL level Working voltage: 3.0-3.6V RSSI support: not supported Communication level: 3.3V Transmission power: 4dBm Reference distance: 80 meters Air speed: 2Mbps Antenna interface: built-in PCB antenna Communication current: 0.4uA Receiving sensitivity: 85dbm@2Mbps Working humidity: 10%~90% Storage temperature: 40 ℃ -+80 ℃ Working temperature: -25 ℃ -75 ℃

Smart Electronics Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense

Compatible with Raspberry Pi 4 generation Official Sensor Expansion Board RASPBERRY PI SENSE HAT sense Raspberry Pi Sense HAT provides power and data connectivity via the Raspberry Pi motherboard 40Pin GPIO interface. To create the "Astro Pi", the Sense HAT sensor module integrates common sensors, making it usable in a variety of different types of experiments, applications, and even It is a game.

RS422 to TTL/UART/MCU Serial Port Signal Mutual Module with Over-Voltage Over-Current Protection-3.3V

VCC: + 3.3V TXD : The module's TTL (UART) to send, connected to the microcontroller's RXD receiver pin; RXD : The module's TTL (UART) receiver, connected to the microcontroller TXD send pin; GND : The module ground wire (this wire must be connected with the ground wire of microcontroller system);

Smart Electronics 4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board 14.4V 14.8V 16.8V BMS

4S 30A High Current Li-ion Lithium Battery 18650 Charger Protection Board 14.4V 14.8V 16.8V BMS 1. Module name: 4 series lithium battery protection board 2. Modular nature: polymer lithium battery protection board 3. Overcharge detection voltage: 4.25 ± 0.025V 4. Overcharge release voltage: 4.15 ± 0.05V 5. Overdischarge detection voltage: 2.50 ± 0.08V 6. Over-discharge termination voltage: 3 ± 0.1V 7. Overcurrent: 20-30A

Smart Electronics Level 3 Sensor Module with 25V Maximum Voltage Detector for Arduino

Level 3 Sensor Module with 25V Maximum Voltage Detector for Arduino

Smart Electronics Industrial grade RS232 RS485 CAN to TTL communication module Serial port module CAN module

Industrial grade RS232 RS485 CAN to TTL communication module Serial port module CAN module

Smart Electronics LCD1602 yellow-green screen 1602A lcd display blue

LCD1602 yellow-green screen 1602A lcd display blue 69.5*21.8*17.8 weighs about 30 grams

L298N motor driver board module intelligent vehicle robot accessory H-bridge drive stepper motor driver

Smart Electronics ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

ESP32 WIFI BLE Single/Dual 4/8 channel Relay Module ESP32 Secondary Development Board

Smart Electronics IPS 0.96-inch TFT display IPS LCD screen 0.96 "st7735 IPS display screen 0.96 inch LCD Module

IPS 0.96-inch TFT display IPS LCD screen 0.96 "st7735 IPS display screen 0.96 inch LCD Module

Smart Electronics GY-BME/BMP280 3.3V-5V temperature and humidity/atmospheric pressure sensor module

GY-BME/BMP280 3.3V-5V temperature and humidity/atmospheric pressure sensor module

CSR8645 4.0 audio module, support APTx lossless compression speaker amplifier

The main control chip CSR8645 stereo audio module can make calls. The headset can be connected to 2 mobile phones at the same time. CSR has better sound quality. BLE 4.0, good wall penetration effect, APT-x high sound quality transmission.

Green mini version RC522 RFID Module IC Card Proximity Module MFRC-522 RF Module with S50 Fudan Card Keychain

Wedding special igniter 12V DC universal high voltage generator pulse high voltage module output 60KV arc

Smart Electronics JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module

JDY-23 BLE5.0 ble transparent data transmission CC2541 slave bluetooth module Model: JDY-23 Working frequency band: 2.4G Transmission power: 4dB (maximum) Communication interface: UART Working voltage: 1.8-3.6V Working temperature: -40 ℃ -80 ℃ Antenna: Built in PCB antenna Receiving sensitivity: -97dbm Transmission distance: 60 meters Master Slave Support: Slave Module size: 19.6 * 14.94 * 18mm (length, width, height) Bluetooth version: BLE5.0 (also includes BLE4.0 and BLE4.2) Wake up current: 800uA (with broadcast) Shallow sleep current:<50uA (with broadcast) Command parameters: Save parameter configuration, power-off data saved SMT welding temperature:<260 ℃ RF TX/RX peak current: 5mA

Smart Electronics Raspberry pi zero camera module OV5647 500W RPI zero v1.3 camera

Raspberry pi zero camera module OV5647 500W RPI zero v1.3 camera 5 million pixels Light-sensitive chips OV5647 Camera parameters: The CCD size: 1/4 inch Viewing Angle (Diagonal) : 72.4 degrees The best pixel sensor: 1080 p Static image resolution is 2592 x 1944 Support 1080 p30, 1080 p60 and 720 x480p60/90 video footage Overall size: 60 mm x 11.5 mm x 5 mm

Smart Electronics MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor

MH-Z19B CO2 detection sensor module Infrared carbon dioxide sensor MH-Z19B 0-5000PPM Mh-z19c 400-5000ppm C is an upgrade of B Carbon dioxide gold shell (non mh-z19) 400-5000ppm Carbon dioxide white shell (non mh-z19) 400-5000ppm

W1209 LED Digital Thermostat Temperature Control Thermometer Thermo Controller Switch Module DC 12V Waterproof NTC Sensor

Temperature range :-50-110 ° Dimensions: 48.5 * 40mm Temperature control mode: ON / OFF Resolution:When temperature is 0.1°, the resolution is -9.9~99.9, other temperature segment is 1° Control accuracy: 0.1 ° Hysteresis accuracy: 0.1° Refresh rate: 0.5S High temperature protection: 0-110° Supply voltage: DC 12V Static current: ≤ 35MA, attract current ≤ 65MA Output voltage: DC 12V Output power: 20A relay
Previous： Smart Electronics IR Infrared Proximity Sensor Obstacle Avoidance module for Arduino Raspberry Pi DIY Smart Car 3PIN Robot Reflective Photoelec
Next： Smart Electronics IR Infrared Sensor Module Slotted Optical Optocoupler Speed Measuring Sensor Module Motor Speed Detection Robot
Return
TOP
86-755-83877216
smartbes
smartbes