Search

Smart Electronics MQ-7 MQ7 CO Gas Sensor, Carbon Monoxide Sensor motion sensor led lights

Products > Sensor > Smart Electronics MQ-7 MQ7 CO Gas Sensor, Carbon Monoxide Sensor motion sensor led lights
    • 1
    • 2
    • 3
    • 4
    • 5

Smart Electronics MQ-7 MQ7 CO Gas Sensor, Carbon Monoxide Sensor motion sensor led lights

MQ-7 MQ7 CO Gas Sensor, Carbon Monoxide Sensor motion sensor led lights

Characteristic:
1,Module size: 32(L)× 20(W)× 22(H)
2,Input voltage: DC5V.
3,Power dissipation: 150mA.
4,DO output: 0.1-5V.
5,AO output: 0.1-0.3V.
6,Detectable concentration: 10-1000ppmCO.
shared：
Smart Electronics  MQ-7 MQ7 CO Gas Sensor, Carbon Monoxide
Sensor motion sensor led lights
Notes:
Due to different production batch,the product color will be different,but we guarantee that all the product is same quality.

Characteristic:
1,Module size: 32(L)× 20(W)× 22(H)
2,Input voltage: DC5V.
3,Power dissipation: 150mA.
4,DO output: 0.1-5V.
5,AO output: 0.1-0.3V.
6,Detectable concentration: 10-1000ppmCO.

Module features:
1,High quality double panel design.
2,Power and TTL signal output indication.
3,Has better sensitive detection for carbon monoxide.
4,Has a long service life and reliable stability.
5,Suitable for the detection of carbon monoxide, gas, etc.


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Thin film pressure sensor, Square 16 nodes side length 20 mm flexible resistive motion sensor

The IMM0092 of Idong Film Electronics is a member of the single-node sensor family. Although IMM092 has 16 nodes, because IMM00092 has 32 lines of output, each node has 2 lines of output, and the 16 nodes are independent of each other. They are very reliable piezoresistive sensors. When the pressure (pressure) applied to the effective area of the sensor increases, the output resistance of the sensor decreases. Single-point sensors can be measured using a multimeter or customer's own circuit.

AM2305 Digital temperature and humidity sensor

1) The relative humidity and temperature, calibration of all digital output 2) Excellent long-term stability 3) Without additional components 4) Long distance signal transmission 5) ultra low power 6) 4 pin installation 7) Completely interchangeable

Smart Electronics NTC Probe for immersion sensor custom steel tube 50mm

NTC Probe for immersion sensor custom steel tube 50mm 1.sensor well for immersion sensor , custom steel tubes 50mm G1/2 legth 56mm 2.sensor well for immersion sensor custom steel tubes 80mm G1/2 legth 86mm

Smart Electronics Stainless steel temperature sensor probes

Stainless steel temperature sensor probes

Smart Electronics MQ-3 detects alcohol sensor, ethanol sensor, combustible gas sensor probe

MQ-3 detects alcohol sensor, ethanol sensor, combustible gas senso Feature Product model: MQ-3 Product Type: Semiconductor gas sensor Standard package: Bakelite (Black Bakelite) Detection gas: alcohol vapor Detection concentration: 0.04-4mg/L alcohol

Smart Electronics 41F bipolar latch 012 hall sensor AH41 sensor 43A Electric vehicle 43F electric motor SS41F SS443A

41F bipolar latch 012 hall sensor AH41 sensor 43A Electric vehicle 43F electric motor SS41F SS443A

D2027 piezoresistive flexible film pressure sensor foot pressure force measurement customization

Terminal type Male terminal Female terminal Pressure range 500g 2kg 5kg 10kg 20kg 40kg 60kg 100kg

Thin film pressure sensor-single point circular diameter 4 mm flexible resistive FSR

IMS054-C04A (IMS-C04A) is a member of the single-node sensor family. They are all very reliable piezoresistive sensors, using A structure with double-sided silver electrodes. When the pressure (pressure) applied to the effective area of the sensor increases, the output resistance of the sensor decreases, and the single-point sensor can be measured with a multimeter or the customer's own circuit

M12 proximity switch sensor LJ12A3-4-Z/BX/BY/AX/AY/EX/DX/EZ/DZ normally open 24V

Current specification: 300mA Rated working voltage: DC: 6-36V Distance measurement: 4mm±10% Output mode: NPN NO (normally open) Level signal: low level Installation method: non-embedded Thread diameter: M12X1 Shell material: brass nickel plated Wire length: 1.2 meters

FSR406 Pressure Sensor , 100% New and Original Force Sensitive Resistor

This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This FSR can sense applied force anywhere in the range of 100g-10kg.

Smart Electronics DHT11 module digital temperature and humidity sensor dht-11 electronic building block

DHT11 module digital temperature and humidity sensor dht-11 electronic building block (37 in one) Product parameters: 1. Power supply voltage: 5V 2. Temperature error: 0-50℃ 3. Humidity range: 20-90%RH

Original imported 0.2 "pressure sensor FSR400 Force sensitive resistor fsr sensor

MLX90614ESF-BAA non-contact infrared temperature sensor high precision digital temperature sensor original

Model: MLX90614ESF-BAA Material: metal Origin: Mainland China Output model category: Digital sensor Applicable scene: Car air conditioner, indoor heating, medical equipment temperature measurement Sensor category: infrared sensor Size: 31x31x18mm Working current: 0.01A Working voltage: 3V

High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor

Film pressure sensor is piezoresistive, also known as resistive, equivalent to varistor in the circuit. When the sensor has no external load, the circuit is in high resistance state (generally greater than 2m Ω). When the external pressure is applied to the sensor, the circuit resistance will decrease (tens of K Ω or less). With a multimeter, the resistance value can be read directly by connecting to two external terminals. The resistance value changes with the change of external pressure. The voltage is inversely proportional to the resistance, while the voltage カ is linearly related to the conductivity, so the pressure change can be inversely deduced according to the conductivity change.

Electronics Customized SS 304 Stainless steel pipe double ferrule compression connector tube

Resistive thin film pressure sensor comb type B structure flexible sensor

Terminal type A2 male terminal Female terminal Female terminal plastic shell A1 male terminal Range 1kg small force 10Kg middle force 50kg vigorously 100g micro force

PIR IR Light Motion Sensor Infrared Human Induction Lamp Switch 220V 50HZ Lights Control Ceiling On Off 3-6m Sensing

Product Parameter: 1.Sensing Mode:PIR sensing + light control 2.Rated Voltage:220V 50HZ 3.Output Way:Controllable Silicon 4.Load Power:filament lamp ≤100W electricity saving lamp ≤30W LED≤18W 5.Delay:20s (people are moving within the sensing range, the switch will auto delay ​and keep connecting;if people stay still,switch will stop responsing) 6.Sensing Distance:3-6m (high temperature will influence switch sensibility) 7.Sensing Angle:110° 8.Sensitivity to light :darkeness

Infrared temperature measurement sensor MLX90614ESF-BAA for infrared forehead thermometer

Product category: temperature sensor mounted on board Output type: Digital Configuration: Remote Accuracy: +/- 0.5 C Power supply voltage-minimum: 2.6 V Power supply voltage-maximum: 3.6 V Interface type: 2-Wire Resolution: 10 bit Minimum operating temperature:-40° C Maximum operating temperature: +85 °C Installation style: Through Hole Package / Box: TO-39-4 Package: Tube Temperature threshold: +380 °C Working power supply current: 1.3 mA Unit weight: 2 g
Previous： Smart Electronics TDA7388 four-channel output car power amplifier audio high power amplifier chip IC
Next： Smart Electronics TGS822 TGS 822 alcohol gas sensor
Return
TOP
86-755-83877216
smartbes
smartbes