Search

Smart Electronics 5M-6GHz Gain 20dB hf ultra breitband amplifier 6g ultra wideband medium power RF amplifier with Shielded Case

Products > Module > Smart Electronics 5M-6GHz Gain 20dB hf ultra breitband amplifier 6g ultra wideband medium power RF amplifier with Shielded Case
    • 1
    • 2
    • 3
    • 4
    • 5

Smart Electronics 5M-6GHz Gain 20dB hf ultra breitband amplifier 6g ultra wideband medium power RF amplifier with Shielded Case

5M-6GHz Gain 20dB hf ultra breitband amplifier 6g ultra wideband medium power RF amplifier with Shielded Case
shared：

Smart Electronics 5M-6GHz Gain 20dB hf ultra breitband amplifier 6g ultra wideband medium power RF amplifier with Shielded Case
Features:
* This is a 5--6000MHz RF signal power amplifier with 20dB gain.
* It has big dynamic range and wide operating frequency range.
* The power supply voltage is 5VDC, and working current is 85mA.
* Maximum output power is +21dBm(100mW)@1dB compression point.
* It is suitable for all types of fixed gain amplification of RF signal.

Specifications:
Operating Frequency: 5--6000MHz
Amplifier Gain: 20dB
Max. Output Power: +21dBm(100mW)@1dB compression point
Working Current: 85mA (5V)
Power Supply Voltage: 5VDC
System Impedance: 50ohm
Size: 34*25mm/1.33*0.98in
THE CONNECTOR TYPE : SMA-KE


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Smart Electronics 3.5 inch SPI serial port TFT LCD display module LCD touch screen ILI9488/6/1 driver 320X480

3.5 inch SPI serial port TFT LCD display module LCD touch screen ILI9488/6/1 driver 320X480

Smart Electronics 24-hour timed 5 time periods real time relay module clock control/delay and clock synchronization module

24-hour timed 5 time periods real time relay module clock control/delay and clock synchronization module

Smart Electronics Dual coil fast wireless charger transmitter module PCBA board + 2 coil general qi standard diy board

Dual coil fast wireless charger transmitter module PCBA board + 2 coil general qi standard diy board Product Parameters 1. Input power supply: 5V 2A or 9V 1.67-2a, output: 5V 1A or 9V 1.2A 2. Product weight: 0.035kg 3. Charging power: 5W / 7.5w/10w automatic identification 4. Transmission distance: 2-8mm 5. Executive standard: Qi wireless charging standard 6. Product certification: CE / FCC / RoHS

Smart Electronics 150W Mono TPA3116D2 Digital Amplifier Board Subwoofer Trolley Box Amplifier Module XH-M571

150W Mono TPA3116D2 Digital Amplifier Board Subwoofer Trolley Box Amplifier Module XH-M571

Smart Electronics New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module

New Arrival Raspberry Pi 3 Model B+ Wide Angle Camera 5MP Adjustable-focus Mini Vision Video Camera module Temperature (Operation): -20°C to 70°C Temperature (Stable Image) : 0°C to 50°C Focus :Fixed Object distance:30CM-∞ Resolution: 800LW/PH (Center) Working power supply : 3.3v(pin15) Operating system: for Raspberry Pi Certifications :FCC and CE Sensor Type: OV5647 (1/4” ) Active Array Size : 2592*1944 Sensitivity: 600mV/Lux-sec F/No: 2.35 EFL: 1.55 mm BFL(Optical): 3.1mm FOV: 160° TV Distortion :<14.5% Relative Illumination (Sensor) : 70% IR Filter : 650±10nm

STM32F103C8T6 ARM STM32 Minimum System Development Board Module

CH32F103C8T6 chip is compatible with STM32F103C8T6 series chips, all pins are compatible, all registers are compatible.

Smart Electronics PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply)

PAM8403 Mini 5V Digital Small Power Amplifier Board (USB supply) Product Name: pam8403 digital power amplifier board Specification and model: gf1002 Power supply range: 5V DC Minimum output: 3W * 2 Appearance size: 29.5 * 20.2 * 15mm (excluding protruding potentiometer rod)

Smart Electronics CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

CO2 Carbon Dioxide Sensor Module MG811 Voltage 0-2V Voltage output Original stock

Smart Electronics JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module

JDY-34 SPP dual-mode Ble module SPP-C host printer Ble module Model: JDY-34 Antenna type: PCB board mounted antenna Working frequency band: 2.4G Transmission power: 4dB (peak) Communication interface: UART Working voltage: 2.1V-3.6V Working temperature: -40 ° C-80 ° C Receiving sensitivity: -91dbm Transmission distance: 40 meters Module size: 27 * 12.88 * 1.8mm Bluetooth version: BLE4.2+SSP dual-mode (backward compatible with 4.2, 4.0, 3.0, 2.1, 2.0) Transmission rate: BLE14 K Bytes/s SPP 40K byte/s (Android or computer Bluetooth tested 40K byte/s speed) Command parameter saving: parameter configuration and power-off data are saved SIM welding temperature:<260 ℃ Working current: 15mA

ACS712ELC-05B 5A range ACS712 module AC current sensor module

1. Current sensor chip: ACS712ELC-05B; 2. Pin 5V power supply, onboard power indicator; 3. The module can measure plus or minus 5A current, corresponding to the analog output 185mV/A; 4. When no detection current passes, the output voltage is VCC/2; 5. PCB board size: 31(mm)x13(mm);

Smart Electronics 100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V

100W 2SC5200+2SA1943 Audio Amplifier Board Mono Channel HIFI Power Amplifier Board Dual DC35V Operating voltage: Dual DC 10 - 45V recommended Dual DC 35V Rated output power :100W(4 Ohm ± 35V) Maximum output power : 150W (4 Ohm ± 45V) enormous heat, is not recommended PCB size :30 x 50 x 35mm Pitch : 5.08mm Hole distance between two power tube : 47mm

Smart Electronics IRS2092S 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

IRS2092S 500W Mono Channel Digital Amplifier Class D HIFI Power Amp Board 20Hz-20KHz Digital Amplifier Module

Smart Electronics IR Infrared Proximity Sensor Obstacle Avoidance module for Arduino Raspberry Pi DIY Smart Car 3PIN Robot Reflective Photoelec

IR Infrared Proximity Sensor Obstacle Avoidance module for Arduino Raspberry Pi DIY Smart Car 3PIN Robot Reflective Photoelec

Smart Electronics Sound Detection Sensor Module Sound Sensor Vehicle

Sound Detection Sensor Module Sound Sensor Vehicle

16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685 DIY Servo Shield Module

Smart Electronics Level 3 Sensor Module with 25V Maximum Voltage Detector for Arduino

Level 3 Sensor Module with 25V Maximum Voltage Detector for Arduino

Smart Electronics GSM module, SIM808 Module with GPS antenna GSM GPRS GPS development board

GSM module, SIM808 Module with GPS antenna GSM GPRS GPS development board This module is 5-12V power supply, when the power supply is less than 9V, 2A DC is required. The other power supply port is 3.5-4.2V, suitable for lithium battery power supply. The computer can debug USB-TTL. Suitable for portable. Two sets of antenna SMA ports, GPS and GSM antennas are provided.

Smart Electronics TTGO T-Display ESP32 WiFi And Ble Module Development Board

TTGO T-Display ESP32 WiFi And Ble Module Development Board Chipset： ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH： QSPI flash 4MB SRAM： 520 kB SRAM Button： Reset USB to TTL： CP2104 Modular interface： UART,SPI,SDIO,I2C,LED PWM,TV PWM,I2S,IRGPIO,ADC,capacitor touch sensor,DACLNA pre-amplifier

BH1750FVI digital Light Intensity BH1750 Light Module Light Ball DC5V

Keyes BH1750FVI Digital Light Sensor Module is a kind of integrated circuit of digital light intensity sensor for two-wire serial bus interface. Using the light intensity data collected by the module, the brightness of the LCD and keyboard background lamps can be adjusted. Module resolution can detect wide range of light intensity changes.
Previous： TEC1 12715 12715 136.8W 12V-15.4V 15A TEC Thermoelectric Cooler Peltier 40 * 40 full power thermoelectric
Next： Smart Electronics Reed switch relay SIP-1A05 SIP-1A12 SIP-1A24 miniature 5V/12/24VDC 4-pin relay
Return
TOP
86-755-83877216
smartbes
smartbes