Search

SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original

Products > Module > SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original
    • 1

SHT10 temperature and humidity sensor SHT11 SHT15 guarantee new original

SHT1x - Digital Temperature and Humidity Sensor (RH/T)
SHT1x series
SHT10 - low cost version, ±4.5% RH accuracy
SHT11 - standard version, ±3% RH accuracy
SHT15 - high-end version, ±2% RH accuracy
shared：


Characteristics
Dimensions: 7.5 x 4.9 x 2.6 mm
Output: digital (2-wire interface)
Supply voltage range: 2.4 to 5.5 V
Energy consumption: 80μW (at 12-bit, 3V, 1 measurement/second)
RH working range: 0 - 100% RH
T working range: -40 to +125 ° C (-40 to +257 ° F)
RH response time: 8 seconds (tau63%)

 

Packing specification:
Tape and reel, sealed in anti-static bag
SHT10: 2000 tablets
SHT11: 100, 400 or 2000 pieces
SHT15: 100 or 400 pieces

 

Product model: SHT10
Product category: (economical) humidity sensor
-SHT10 series is a patch type temperature and humidity sensor chip
- full scale calibration, two-wire digital output;
- Humidity measurement range: 0 ~ 100% RH;
- Temperature measurement range: -40 to +123.8 °C;
- Humidity measurement accuracy: ±4.5% RH
- Temperature measurement accuracy: ±0.5°C
- Response time: 8s (tau63%);
- Low power consumption 80μW (12-bit measurement, 1 time / s);
- Can be completely submerged.

 

Application areas:
Data collectors, transmitters, automated process control, automotive industry, building control & HVAC, electricity,
metrology testing, pharmaceutical




Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit

Industrial-grade MINI I2C interface High-precision Si7021 temperature and humidity sensor

Working voltage: 1.9-3.6V (3.3V recommended) Standby current: 60nA Temperature range: -40-85°C (recommended -10-60°C) Temperature accuracy: ±0.4℃ (-10-85℃) Humidity range: 0-RH (20%-80%RH recommended) Humidity accuracy: ±3%RH (0-80%RH) Temperature conversion time: 7ms Humidity conversion time: 17ms (temperature conversion will be performed automatically when humidity conversion is performed) Interface type: I2C 2.54mm pitch pad Module size: 8.5X10mm

SHTC1 humidity and temperature sensor temperature sensor for agricultural

Datasheet SHTC1 Humidity and Temperature Sensor IC Best performance-to-price ratio Fully calibrated and reflow solderable Ultra-low power consumption Power-up and measurement within 1 ms 1.8 V supply voltage Ultra-small DFN package : 2 x 2 x0 . 75 mm³ Typical accuracy : ± 3% RH and + 0.3 ºC

Smart Electronics Hall effect sensor ss49e 49e hall element oh49e

Hall effect sensor ss49e 49e hall element oh49e The 49E is a Hall-effect integrated circuit. The output voltage changes with the change of the magnetic flux density, and it can detect the slight change of the magnetic field. It can be used to measure the motion of objects, distance, position sensor, etc. It is alsosuitable for use in harsh environments or heavily polluted conditions.

Smart Electronics Duct type temperature and humidity sensor housing

Duct type temperature and humidity sensor housing 1. Copper sintered dust cover 2. Stainless steel lock wire seat 3. Good air permeability 4. Widely applicable 5. High cost performance

Smart Electronics 41F bipolar latch 012 hall sensor AH41 sensor 43A Electric vehicle 43F electric motor SS41F SS443A

41F bipolar latch 012 hall sensor AH41 sensor 43A Electric vehicle 43F electric motor SS41F SS443A

High density distribution plantar pressure sensor, resistor type sensor FSR pressure acquisition weight sensor

Film pressure sensor is piezoresistive, also known as resistive, equivalent to varistor in the circuit. When the sensor has no external load, the circuit is in high resistance state (generally greater than 2m Ω). When the external pressure is applied to the sensor, the circuit resistance will decrease (tens of K Ω or less). With a multimeter, the resistance value can be read directly by connecting to two external terminals. The resistance value changes with the change of external pressure. The voltage is inversely proportional to the resistance, while the voltage カ is linearly related to the conductivity, so the pressure change can be inversely deduced according to the conductivity change.

Electronics Customized SS 304 Stainless steel pipe double ferrule compression connector tube

MLX90614ESF-BAA non-contact infrared temperature sensor high precision digital temperature sensor original

Model: MLX90614ESF-BAA Material: metal Origin: Mainland China Output model category: Digital sensor Applicable scene: Car air conditioner, indoor heating, medical equipment temperature measurement Sensor category: infrared sensor Size: 31x31x18mm Working current: 0.01A Working voltage: 3V

Smart Electronics NTC Probe for immersion sensor custom steel tube 50mm

NTC Probe for immersion sensor custom steel tube 50mm 1.sensor well for immersion sensor , custom steel tubes 50mm G1/2 legth 56mm 2.sensor well for immersion sensor custom steel tubes 80mm G1/2 legth 86mm

Smart Electronics Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136

Hydrogen sulfide sensor probe MQ-136 Toxic gas H2S sensor MQ136 The gas-sensitive material used in the MQ136 hydrogen sulfide gas sensor is tin dioxide (SnO2) with low conductivity in clean air. When there is hydrogen sulfide gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of hydrogen sulfide gas in the air increases. Using a simple circuit, the change in conductivity can be converted into an output signal corresponding to the gas concentration.

Thin Film Pressure Sensor DF9-40 High Precise Force Sensing Resistor Resistance-type Flexible Pressure Sensor

This flexible pressure sensor is based on new nanometer pressure-sensitive materials supplemented by ultra-thin film substrate. Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure. It has pressure sensitive function as well as water-resistant function. When sensor detects outside pressure, the resistance of sensor will change. Pressure signal can be converted into a corresponding electrical signal output using simple circuit.

Smart Electronics MQ-9 carbon monoxide Combustible gas sensor alarm module

MQ-9 carbon monoxide Combustible gas sensor alarm module Feature: Size: 32mm * 22mm * 27mm Main chip: LM393, MQ-9 gas sensors Working voltage: DC 5 V Characteristics: 1, having a signal output instruction. 2, dual signal output (analog output, and TTL level output) 3, TTL output valid signal is low. (Low-level signal when the output light can be directly connected to the microcontroller) 4, 0 - 5V analog output voltage, the higher the concentration the higher the voltage. 5, for CO, gas, liquefied petroleum gas with high sensitivity and good selectivity. 6, has a long life and reliable stability 7, rapid response and recovery characteristics Application: MQ-9 sensor main family, environmental detection of carbon monoxide gas for CO, gas, liquefied petroleum gas field testing;

Thin film pressure sensor resistive force sensitive and pressure sensitive plantar flexible PVDF robot tactile FSR402 406

LJ12A3-4-Z/BY Inductive Proximity Sensor Switch 4mm Detection PNP DC6-36V NO Normally Open

PIR IR Light Motion Sensor Infrared Human Induction Lamp Switch 220V 50HZ Lights Control Ceiling On Off 3-6m Sensing

Product Parameter: 1.Sensing Mode:PIR sensing + light control 2.Rated Voltage:220V 50HZ 3.Output Way:Controllable Silicon 4.Load Power:filament lamp ≤100W electricity saving lamp ≤30W LED≤18W 5.Delay:20s (people are moving within the sensing range, the switch will auto delay ​and keep connecting;if people stay still,switch will stop responsing) 6.Sensing Distance:3-6m (high temperature will influence switch sensibility) 7.Sensing Angle:110° 8.Sensitivity to light :darkeness

Force Sensor RP-C18.3-ST Flexible Thin Film Pressure Sensor Intelligent 20g-6kg

The flexible sensor has the characteristics of flexible ultra-thin, ultra-low power consumption and extreme speed response, etc. Small size, this flexible pressure sensor is based on new nanometer pressure-sensitive materials ​supplemented by ultra-thin film substrate. This pressure sensor has the characteristic of high stability, high consistency. Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure.

Smart Electronics MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element

MQ-135 Semiconductor air pollution sensor MQ135 Air quality pollution gas sensitive element Product model: MQ135 Product Type: Semiconductor gas sensor Standard package: Bakelite (Black Bakelite) Detection gas: ammonia, sulfide, benzene vapor Detection concentration: 10-1000ppm (ammonia, toluene, hydrogen) Standard circuit conditions Loop voltage Vc: ≤24VDC Heating voltage VH: 5.0V±0.2 V ACORDC Load resistance RL: adjustable

Smart Electronics TGS822 TGS 822 alcohol gas sensor

TGS822 TGS 822 alcohol gas sensor Parameters: Alcohol measurement range: 50-5,000ppm Sensitivity (resistance ratio): 0.40 ± 0.1 Circuit voltage: 24V (DC/AC) Heater voltage: 5V±0.2V(AC/DC)

DHT22 digital temperature and humidity sensor AM2302 temperature humidity module

Technical parameter Measuring range Temperature: -40….+80°℃ Humidity: 0...99.9%RH
Previous： SHTC1 humidity and temperature sensor temperature sensor for agricultural
Next： AM2305 Digital temperature and humidity sensor
Return
TOP
86-755-83877216
smartbes
smartbes